Hi,
Im quite satisfied with Gargoyle on the wndr3700v2, until i changed my bandwith to 250mbit down. Directly connected to my providers modem i get the speed, but on the wndr its capped to about 100mbit. The router shows all ports as Gbit.
I cant even find the max wan speed of this device via Google... maybe im just blind. Would be happy if anyone has a clue. Maybe i just need a new router, but i thought a Gbit router should be capable of doing 250mbit.
Thanks!
Edit: ok just found another thread with the same problem but no solution yet. Gonna try to revert to stock fw, and will report back here for, in case anyone cares.
Any tipps regarding a new router, that is capable of at least 250mbit on the wan side?
wndr3700v2 cant max 100mbit @wan
Moderator: Moderators
Re: wndr3700v2 cant max 100mbit @wan
I would be interested to hear your findings.
Which version of Gargoyle did you install ?
Which version of Gargoyle did you install ?
Re: wndr3700v2 cant max 100mbit @wan
Atm im on 1.9.0, gonna revert back tomorrow i guess... or when i find the time.
Re: wndr3700v2 cant max 100mbit @wan
Maybe it is too slow to handle this much data speed. Maybe 680mhz cpu is not enough for 250mbps.
wdr3600 v1.5 @ Latest ispyisail build
Re: wndr3700v2 cant max 100mbit @wan
But then the term Gbit Router confuses me... shouldnt it then be at least able to do more then 100Mbit? Im not sure if theres much more load on a wan port then on a lan port.
Re: wndr3700v2 cant max 100mbit @wan
worth a read perhaps
viewtopic.php?f=3&t=7859&p=36951#p36947
viewtopic.php?f=3&t=7859&p=36951#p36947
Can you help someone else get Gargoyle up and running?
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E
Re: wndr3700v2 cant max 100mbit @wan
Yes i was thinking about hardware nat vs software nat. So maybe thats an issue.
HARDWARE NAT - 1000mbps
SOFTWARE NAT - i dont know, maybe max 200mbps
If u want 3rd party firmware, thats the price to pay. Maybe someday they will figure it out how to use hardware nat on 3rd party fw.
Try the speed on stock firmware and report here. Should be full speed on stock.
HARDWARE NAT - 1000mbps
SOFTWARE NAT - i dont know, maybe max 200mbps
If u want 3rd party firmware, thats the price to pay. Maybe someday they will figure it out how to use hardware nat on 3rd party fw.
Try the speed on stock firmware and report here. Should be full speed on stock.
wdr3600 v1.5 @ Latest ispyisail build
Re: wndr3700v2 cant max 100mbit @wan
Ok now it makes all sense, thanks guys. The speed is not worth the original firmware, id rather get a second Gbit router for the faster downloads.
Re: wndr3700v2 cant max 100mbit @wan
According to this site : http://www.smallnetbuilder.com/tools/charts/router/view
The wndr3700v2 is capable WAN2LAN at max 430 mbps. So even with stock firmware thats the max throughput even with Gbit ports.
The wndr3700v2 is capable WAN2LAN at max 430 mbps. So even with stock firmware thats the max throughput even with Gbit ports.
wdr3600 v1.5 @ Latest ispyisail build