Hi!
Cannot install on DIR-505L, from factory stock firmware, tried the factory bin to gargoyle. Already tried normal and emergency flash mode, but always get the "not a valid firmware file"error.
What can I do?
D'Link DIR-505L
Moderator: Moderators
Re: D'Link DIR-505L
try giving the image file a shorter-name.bin
Can you help someone else get Gargoyle up and running?
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E
-
- Posts: 2
- Joined: Fri Mar 04, 2016 5:08 pm
Re: D'Link DIR-505L
Already tried. "Firmware.bin" for instance. Still no success
Re: D'Link DIR-505L
Have you checked the integrity of the image file you downloaded with the sig? and/or redownload the image file.
Can you help someone else get Gargoyle up and running?
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E
Re: D'Link DIR-505L
Are you putting it into D-Link recovery mode and using the factory.bin file as described in the OpenWRT wiki?
https://wiki.openwrt.org/toh/d-link/dir ... _interface
If yes to both, the only other thing I can suggest is using a different web browser. One of my D-Link's recovery mode only liked Internet Explorer... and I think Firefox.
https://wiki.openwrt.org/toh/d-link/dir ... _interface
If yes to both, the only other thing I can suggest is using a different web browser. One of my D-Link's recovery mode only liked Internet Explorer... and I think Firefox.
QoS Tip: Don't complicate your QoS settings. Gargoyle evenly splits available bandwidth between active devices as needed. Just delete all your classification rules and leave only one normal service class and you're done. No more arguing over bandwidth.