gargoyle-ispy 2016-February-12 21:17.torrent

Want to share your OpenWrt / Gargoyle knowledge? Implemented a new feature? Let us know here.

Moderator: Moderators

Post Reply
ispyisail
Moderator
Posts: 5185
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

gargoyle-ispy 2016-February-12 21:17.torrent

Post by ispyisail »

USE AT YOUR OWN RISK

gargoyle-ispy 2016-February-12 21:17.torrent
https://goo.gl/8OLodi



magnet:?xt=urn:btih:c696de091028e593550864a3789b6cf548f5057e&dn=gargoyle-ispy%202016-February-12%2021_17.7z&tr=udp%3a%2f%2ftracker.openbittorrent.com%3a80&tr=udp%3a%2f%2fopen.demonii.com%3a1337&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969&tr=udp%3a%2f%2ftracker.leechers-paradise.org%3a6969

Routers
https://goo.gl/T7wmoX

Enable USB modem for ar71xx.usb
Thank you forum users @petbrau & n8b
CONFIG_PACKAGE_kmod-usb-net-cdc-ether=y


Enable Enable USB modem for ar71xx usb_large ath10k ath10k_large
Top
n8b
Posts: 70
Joined: Wed Sep 16, 2015 1:20 pm
Location: Denmark

Re: gargoyle-ispy 2016-February-12 21:17.torrent

Post by n8b »

Hi.

Thanks for the new build :)

I jumped right in and tested Huawei E3372 hilink modem on TL-WDR3600.

Now the package kmod-usb-net-cdc-ether is there. That's good.

When I plug in the modem then sometimes it is not recognised. I'll try this some more to see if I can find a pattern.

When it is recognised it is not working. No 4G to select under WAN. Not able to access the modem on 192.168.8.1 as I could in OpenWrt.

Logread from a power-on with the modem plugged in:

Code: Select all

Fri Feb 12 20:11:56 2016 kern.info kernel: [   14.440000] cfg80211: Calling CRDA for country: US
Fri Feb 12 20:11:56 2016 kern.info kernel: [   14.520000] cfg80211: Regulatory domain changed to country: US
Fri Feb 12 20:11:56 2016 kern.info kernel: [   14.520000] cfg80211:  DFS Master region: FCC
Fri Feb 12 20:11:56 2016 kern.info kernel: [   14.530000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Fri Feb 12 20:11:56 2016 kern.info kernel: [   14.540000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
Fri Feb 12 20:11:56 2016 kern.info kernel: [   14.540000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
Fri Feb 12 20:11:56 2016 kern.info kernel: [   14.550000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
Fri Feb 12 20:11:56 2016 kern.info kernel: [   14.560000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s)
Fri Feb 12 20:11:56 2016 kern.info kernel: [   14.570000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
Fri Feb 12 20:11:56 2016 kern.info kernel: [   14.580000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Fri Feb 12 20:11:56 2016 kern.info kernel: [   15.740000] usb 1-1.1: USB disconnect, device number 3
Fri Feb 12 20:11:56 2016 kern.info kernel: [   16.090000] usb 1-1.1: new high-speed USB device number 4 using ehci-platform
Fri Feb 12 20:11:56 2016 kern.info kernel: [   16.360000] cdc_ether 1-1.1:1.0 eth1: register 'cdc_ether' at usb-ehci-platform-1.1, CDC Ethernet Device, 0c:5b:8f:27:9a:64
Fri Feb 12 20:11:56 2016 kern.info kernel: [   16.380000] usb-storage 1-1.1:1.2: USB Mass Storage device detected
Fri Feb 12 20:11:56 2016 kern.info kernel: [   16.380000] scsi host1: usb-storage 1-1.1:1.2
Fri Feb 12 20:11:56 2016 kern.notice kernel: [   17.390000] scsi 1:0:0:0: Direct-Access     HUAWEI   TF CARD Storage  2.31 PQ: 0 ANSI: 2
Fri Feb 12 20:11:56 2016 kern.notice kernel: [   17.430000] sd 1:0:0:0: [sda] Attached SCSI removable disk
Fri Feb 12 20:11:56 2016 daemon.err block: Unkown action change
Fri Feb 12 20:12:00 2016 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly
Fri Feb 12 20:12:00 2016 daemon.err block: /dev/mtdblock3 is already mounted
Fri Feb 12 20:12:02 2016 authpriv.info dropbear[1663]: Not backgrounding
Fri Feb 12 20:12:06 2016 user.err syslog: error starting threads: errno 89 (Function not implemented)
Fri Feb 12 20:12:06 2016 kern.info kernel: [   28.520000] device eth0.1 entered promiscuous mode
Fri Feb 12 20:12:06 2016 kern.info kernel: [   28.530000] device eth0 entered promiscuous mode
Fri Feb 12 20:12:06 2016 daemon.notice netifd: Interface 'lan' is enabled
Fri Feb 12 20:12:06 2016 daemon.notice netifd: Interface 'lan' is setting up now
Fri Feb 12 20:12:06 2016 daemon.notice netifd: Interface 'lan' is now up
Fri Feb 12 20:12:06 2016 daemon.notice netifd: Interface 'loopback' is enabled
Fri Feb 12 20:12:06 2016 daemon.notice netifd: Interface 'loopback' is setting up now
Fri Feb 12 20:12:06 2016 daemon.notice netifd: Interface 'loopback' is now up
Fri Feb 12 20:12:06 2016 daemon.notice netifd: Interface 'wan' is enabled
Fri Feb 12 20:12:06 2016 daemon.notice netifd: Interface 'wan6' is enabled
Fri Feb 12 20:12:06 2016 daemon.notice netifd: Network device 'lo' link is up
Fri Feb 12 20:12:06 2016 daemon.notice netifd: Interface 'loopback' has link connectivity
Fri Feb 12 20:12:07 2016 kern.info kernel: [   29.170000] eth0: link up (1000Mbps/Full duplex)
Fri Feb 12 20:12:07 2016 kern.info kernel: [   29.170000] br-lan: port 1(eth0.1) entered forwarding state
Fri Feb 12 20:12:07 2016 kern.info kernel: [   29.180000] br-lan: port 1(eth0.1) entered forwarding state
Fri Feb 12 20:12:07 2016 daemon.notice netifd: Network device 'eth0' link is up
Fri Feb 12 20:12:07 2016 daemon.notice netifd: VLAN 'eth0.1' link is up
Fri Feb 12 20:12:07 2016 daemon.notice netifd: VLAN 'eth0.2' link is up
Fri Feb 12 20:12:07 2016 daemon.notice netifd: Interface 'wan' has link connectivity
Fri Feb 12 20:12:07 2016 daemon.notice netifd: Interface 'wan' is setting up now
Fri Feb 12 20:12:07 2016 daemon.notice netifd: Interface 'wan6' has link connectivity
Fri Feb 12 20:12:07 2016 daemon.notice netifd: Interface 'wan6' is setting up now
Fri Feb 12 20:12:07 2016 daemon.notice netifd: Interface 'wan6' is now up
Fri Feb 12 20:12:07 2016 daemon.notice netifd: Bridge 'br-lan' link is up
Fri Feb 12 20:12:07 2016 daemon.notice netifd: Interface 'lan' has link connectivity
Fri Feb 12 20:12:07 2016 user.emerg syslog: exportfs: could not open /var/lib/nfs/.etab.lock for locking: errno 2 (No such file or directory)
Fri Feb 12 20:12:07 2016 user.emerg syslog: exportfs: can't lock /var/lib/nfs/etab for writing
Fri Feb 12 20:12:07 2016 user.emerg syslog: exportfs: could not open /var/lib/nfs/.xtab.lock for locking: errno 2 (No such file or directory)
Fri Feb 12 20:12:07 2016 user.emerg syslog: exportfs: can't lock /var/lib/nfs/xtab for writing
Fri Feb 12 20:12:07 2016 user.emerg syslog: Command failed: Not found
Fri Feb 12 20:12:07 2016 kern.info kernel: [   29.930000] cfg80211: Calling CRDA for country: DK
Fri Feb 12 20:12:07 2016 kern.info kernel: [   29.930000] cfg80211: Regulatory domain changed to country: DK
Fri Feb 12 20:12:07 2016 kern.info kernel: [   29.940000] cfg80211:  DFS Master region: ETSI
Fri Feb 12 20:12:07 2016 kern.info kernel: [   29.940000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Fri Feb 12 20:12:07 2016 kern.info kernel: [   29.950000] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Fri Feb 12 20:12:07 2016 kern.info kernel: [   29.960000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
Fri Feb 12 20:12:07 2016 kern.info kernel: [   29.970000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
Fri Feb 12 20:12:07 2016 kern.info kernel: [   29.980000] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
Fri Feb 12 20:12:07 2016 kern.info kernel: [   29.990000] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Fri Feb 12 20:12:08 2016 daemon.notice netifd: wan (2037): udhcpc (v1.23.2) started
Fri Feb 12 20:12:08 2016 daemon.notice netifd: wan (2037): Sending discover...
Fri Feb 12 20:12:08 2016 daemon.notice netifd: wan (2037): Sending select for 192.168.1.249...
Fri Feb 12 20:12:08 2016 daemon.notice netifd: wan (2037): Lease of 192.168.1.249 obtained, lease time 43200
Fri Feb 12 20:12:08 2016 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Fri Feb 12 20:12:08 2016 daemon.notice netifd: Interface 'wan' is now up
Fri Feb 12 20:12:09 2016 kern.info kernel: [   31.180000] br-lan: port 1(eth0.1) entered forwarding state
Fri Feb 12 20:12:11 2016 user.emerg syslog: ERROR: No valid dynamic DNS service configurations defined
Fri Feb 12 20:12:11 2016 user.emerg syslog: (Did you specify correct configuration file path?)
Fri Feb 12 20:12:12 2016 daemon.err block: Unkown action change
Fri Feb 12 20:12:13 2016 daemon.err block: Unkown action change
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: started, version 2.73 cachesize 150
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: compile time options: no-IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: DNS service limited to local subnets
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq-dhcp[2538]: DHCP, IP range 192.168.2.100 -- 192.168.2.249, lease time 12h
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.142.171.235#53 for domain micro
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.211.32.162#53 for domain micro
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 66.244.95.20#53 for domain micro
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.142.171.235#53 for domain oss
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.211.32.162#53 for domain oss
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 66.244.95.20#53 for domain oss
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.142.171.235#53 for domain null
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.211.32.162#53 for domain null
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 66.244.95.20#53 for domain null
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.142.171.235#53 for domain ing
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.211.32.162#53 for domain ing
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 66.244.95.20#53 for domain ing
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.142.171.235#53 for domain indy
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.211.32.162#53 for domain indy
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 66.244.95.20#53 for domain indy
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.142.171.235#53 for domain gopher
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.211.32.162#53 for domain gopher
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 66.244.95.20#53 for domain gopher
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.142.171.235#53 for domain geek
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.211.32.162#53 for domain geek
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 66.244.95.20#53 for domain geek
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.142.171.235#53 for domain fur
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.211.32.162#53 for domain fur
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 66.244.95.20#53 for domain fur
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.142.171.235#53 for domain free
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.211.32.162#53 for domain free
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 66.244.95.20#53 for domain free
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.142.171.235#53 for domain bbs
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.211.32.162#53 for domain bbs
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 66.244.95.20#53 for domain bbs
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.142.171.235#53 for domain dyn
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.211.32.162#53 for domain dyn
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 66.244.95.20#53 for domain dyn
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.142.171.235#53 for domain parody
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.211.32.162#53 for domain parody
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 66.244.95.20#53 for domain parody
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.142.171.235#53 for domain glue
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.211.32.162#53 for domain glue
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 66.244.95.20#53 for domain glue
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 176.58.118.172#53 for domain bit
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 106.187.47.17#53 for domain bit
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 178.32.31.41#53 for domain bit
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using local addresses only for domain lan
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: reading /tmp/resolv.conf.auto
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.142.171.235#53 for domain micro
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.211.32.162#53 for domain micro
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 66.244.95.20#53 for domain micro
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.142.171.235#53 for domain oss
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.211.32.162#53 for domain oss
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 66.244.95.20#53 for domain oss
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.142.171.235#53 for domain null
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.211.32.162#53 for domain null
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 66.244.95.20#53 for domain null
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.142.171.235#53 for domain ing
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.211.32.162#53 for domain ing
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 66.244.95.20#53 for domain ing
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.142.171.235#53 for domain indy
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.211.32.162#53 for domain indy
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 66.244.95.20#53 for domain indy
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.142.171.235#53 for domain gopher
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.211.32.162#53 for domain gopher
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 66.244.95.20#53 for domain gopher
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.142.171.235#53 for domain geek
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.211.32.162#53 for domain geek
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 66.244.95.20#53 for domain geek
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.142.171.235#53 for domain fur
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.211.32.162#53 for domain fur
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 66.244.95.20#53 for domain fur
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.142.171.235#53 for domain free
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.211.32.162#53 for domain free
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 66.244.95.20#53 for domain free
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.142.171.235#53 for domain bbs
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.211.32.162#53 for domain bbs
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 66.244.95.20#53 for domain bbs
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.142.171.235#53 for domain dyn
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.211.32.162#53 for domain dyn
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 66.244.95.20#53 for domain dyn
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.142.171.235#53 for domain parody
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.211.32.162#53 for domain parody
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 66.244.95.20#53 for domain parody
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.142.171.235#53 for domain glue
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 95.211.32.162#53 for domain glue
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 66.244.95.20#53 for domain glue
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 176.58.118.172#53 for domain bit
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 106.187.47.17#53 for domain bit
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 178.32.31.41#53 for domain bit
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using local addresses only for domain lan
Fri Feb 12 20:12:17 2016 daemon.warn dnsmasq[2538]: ignoring nameserver 192.168.2.1 - local interface
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: using nameserver 192.168.1.1#53
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: read /etc/hosts - 2 addresses
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq[2538]: read /tmp/hosts/dhcp - 1 addresses
Fri Feb 12 20:12:17 2016 daemon.info dnsmasq-dhcp[2538]: read /etc/ethers - 0 addresses
Fri Feb 12 20:12:18 2016 daemon.info dnsmasq-dhcp[2538]: DHCPREQUEST(br-lan) 192.168.2.188 00:1f:16:30:fa:46
Fri Feb 12 20:12:18 2016 daemon.info dnsmasq-dhcp[2538]: DHCPACK(br-lan) 192.168.2.188 00:1f:16:30:fa:46 X200s-2
Fri Feb 12 20:12:36 2016 user.notice root: vsftpd init: mounted = 0
Fri Feb 12 20:12:36 2016 user.emerg syslog: ERROR: No drives attached, no directories to share!
Fri Feb 12 20:12:37 2016 user.emerg syslog: setting up led USB1
Fri Feb 12 20:12:37 2016 user.emerg syslog: setting up led USB2
Fri Feb 12 20:12:37 2016 user.emerg syslog: setting up led WLAN2G
Fri Feb 12 20:12:37 2016 daemon.info procd: - init complete -
Fri Feb 12 20:39:09 2016 kern.notice kernel: [   64.720000] random: nonblocking pool is initialized
Fri Feb 12 20:39:16 2016 user.notice firewall: Reloading firewall due to ifup of wan6 (eth0.2)
Fri Feb 12 20:39:18 2016 user.notice firewall: Reloading firewall due to ifup of wan (eth0.2)
Fri Feb 12 20:39:24 2016 kern.warn kernel: [   79.340000] ipt_bandwidth: timezone shift of 60 minutes detected, adjusting
Fri Feb 12 20:39:24 2016 kern.warn kernel: [   79.350000]                old minutes west=0, new minutes west=-60
Fri Feb 12 20:39:32 2016 authpriv.info dropbear[3563]: Child connection from 192.168.2.188:49338
Fri Feb 12 20:39:41 2016 authpriv.notice dropbear[3563]: Password auth succeeded for 'root' from 192.168.2.188:49338
Logread from modem unplug and plug in:

Code: Select all

Fri Feb 12 20:50:06 2016 kern.info kernel: [  721.890000] usb 1-1.1: USB disconnect, device number 4
Fri Feb 12 20:50:06 2016 kern.info kernel: [  721.900000] cdc_ether 1-1.1:1.0 eth1: unregister 'cdc_ether' usb-ehci-platform-1.1, CDC Ethernet Device
Fri Feb 12 20:50:44 2016 kern.info kernel: [  760.280000] usb 1-1.1: new high-speed USB device number 5 using ehci-platform
Fri Feb 12 20:50:45 2016 kern.info kernel: [  760.430000] usb-storage 1-1.1:1.0: USB Mass Storage device detected
Fri Feb 12 20:50:45 2016 kern.info kernel: [  760.430000] scsi host2: usb-storage 1-1.1:1.0
Fri Feb 12 20:50:45 2016 kern.info kernel: [  761.060000] usb 1-1.1: USB disconnect, device number 5
Fri Feb 12 20:50:46 2016 kern.info kernel: [  761.480000] usb 1-1.1: new high-speed USB device number 6 using ehci-platform
Fri Feb 12 20:50:46 2016 kern.info kernel: [  761.770000] cdc_ether 1-1.1:1.0 eth1: register 'cdc_ether' at usb-ehci-platform-1.1, CDC Ethernet Device, 0c:5b:8f:27:9a:64
Fri Feb 12 20:50:46 2016 kern.info kernel: [  761.790000] usb-storage 1-1.1:1.2: USB Mass Storage device detected
Fri Feb 12 20:50:46 2016 kern.info kernel: [  761.800000] scsi host3: usb-storage 1-1.1:1.2
Fri Feb 12 20:50:47 2016 kern.notice kernel: [  762.800000] scsi 3:0:0:0: Direct-Access     HUAWEI   TF CARD Storage  2.31 PQ: 0 ANSI: 2
Fri Feb 12 20:50:47 2016 kern.notice kernel: [  762.830000] sd 3:0:0:0: [sda] Attached SCSI removable disk
Fri Feb 12 20:50:49 2016 daemon.err block: Unkown action change
Fri Feb 12 20:50:49 2016 daemon.err block: Unkown action change
In both I see: daemon.err block: Unkown action change

Thanks

EDIT:

Right after posting I did some more tests. Found eth1 was there and then I found "Connect Via: USB Modem (HiLink)". This edit was posted on that connection. :D

Sorry for the confusion. I'll test some more.
● wrt1200ac (wired-only router)
AP's or for test:
● tl-wdr4300 OpenWrt 18.06.0 (too small for 1.11.X)
● tl-wr841nd OpenWrt 18.06.0 (too small for 1.11.X)
● tew-691gr OpenWrt 18.06.0
Top
ispyisail
Moderator
Posts: 5185
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: gargoyle-ispy 2016-February-12 21:17.torrent

Post by ispyisail »

So its now working as expected?
Top
n8b
Posts: 70
Joined: Wed Sep 16, 2015 1:20 pm
Location: Denmark

Re: gargoyle-ispy 2016-February-12 21:17.torrent

Post by n8b »

I have been reflashing to try to reproduce the issues I had in the first place but failed.

So YES it's working as expected.

What a great project. :geek:
Top
ispyisail
Moderator
Posts: 5185
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: gargoyle-ispy 2016-February-12 21:17.torrent

Post by ispyisail »

n8b wrote:I have been reflashing to try to reproduce the issues I had in the first place but failed.

So YES it's working as expected.

What a great project. :geek:
Sometimes you get lucky
8-)
Top
uninitialized
Posts: 3
Joined: Sat Feb 13, 2016 12:41 pm

Re: gargoyle-ispy 2016-February-12 21:17.torrent

Post by uninitialized »

On the Archer C7 v2 setting "Wireless Channel (5GHz):" to 52 causes wireless AC to not work. Setting to channel 36 allows it to work.

Edit: opkg problem went away

On top of that trying to run "opkg update" leads to errors. It seems the repositories cannot be accessed. Can't install nano :(
Last edited by uninitialized on Sat Feb 13, 2016 7:07 pm, edited 1 time in total.
Top
n8b
Posts: 70
Joined: Wed Sep 16, 2015 1:20 pm
Location: Denmark

Re: gargoyle-ispy 2016-February-12 21:17.torrent

Post by n8b »

uninitialized wrote:On the Archer C7 v2 setting "Wireless Channel (5GHz):" to 52 causes wireless AC to not work. Setting to channel 36 allows it to work.
Did you set your country?

# uci set wireless.radio0.country=XX
# uci set wireless.radio1.country=XX
# uci commit wireless
# wifi

List of countries:
https://git.kernel.org/cgit/linux/kerne ... ree/db.txt

Channels 52 and higher are controlled by DFS so you do not interfere with radar installations.
Top
uninitialized
Posts: 3
Joined: Sat Feb 13, 2016 12:41 pm

Re: gargoyle-ispy 2016-February-12 21:17.torrent

Post by uninitialized »

n8b wrote: # uci set wireless.radio0.country=XX
# uci set wireless.radio1.country=XX
# uci commit wireless
# wifi
That worked!

Should country selection be added to the GUI?
Top
Lantis
Moderator
Posts: 6756
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: gargoyle-ispy 2016-February-12 21:17.torrent

Post by Lantis »

uninitialized wrote:
n8b wrote: # uci set wireless.radio0.country=XX
# uci set wireless.radio1.country=XX
# uci commit wireless
# wifi
That worked!

Should country selection be added to the GUI?

Yea it should.
I'm just trying to think of the nicest and easiest way to do so.
For now it's not too bad for users to set I themselves because that setting isn't overwritten by tje rest of the GUI.

But yes it's on the list :)
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Top
nworbnhoj
Posts: 916
Joined: Mon Jul 21, 2014 10:08 am
Location: Australia
Contact:
Contact nworbnhoj

Re: gargoyle-ispy 2016-February-12 21:17.torrent

Post by nworbnhoj »

Lantis wrote:But yes it's on the list :)
I was thinking - would it be a good idea to narrow the country selection to those in the current time zone?
Can you help someone else get Gargoyle up and running?
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E
Top
Post Reply

Return to “Show / Tell / Contribute”