VPN problem
Moderator: Moderators
VPN problem
Hello:
I have a Router with Gargoyle, with the VPN server installed and running.
On the client computer (a computer with Windows 10) I installed the client openvn.
The connection is successful, but from the client computer can not access computers on the main network.
My network is as follows:
Home Router IP: 10.0.0.1
Gargoyle Router IP: 10.0.0.25
IP VPN: 10.0.0.111
Any idea what could be the problem?
I have a Router with Gargoyle, with the VPN server installed and running.
On the client computer (a computer with Windows 10) I installed the client openvn.
The connection is successful, but from the client computer can not access computers on the main network.
My network is as follows:
Home Router IP: 10.0.0.1
Gargoyle Router IP: 10.0.0.25
IP VPN: 10.0.0.111
Any idea what could be the problem?
Re: VPN problem
screen shot of config page please
Re: VPN problem
I dont trust this
use default settings first
router 192.168.1.1
network 192.168.1.x
VPN 10.8.0.1
use default settings first
router 192.168.1.1
network 192.168.1.x
VPN 10.8.0.1
Re: VPN problem
ispyisail wrote:I dont trust this
use default settings first
router 192.168.1.1
network 192.168.1.x
VPN 10.8.0.1
This is not possible. Too many computers and devices to configure.
I put the values by default in the VPN box, and still same, is the only device that I have access to the VPN server.
Re: VPN problem
I would "fail safe" your router and start again with default values where possiable
Re: VPN problem
So sorry in advance - I always hate to ask for help.. but I'm stuck - It's been several years now since I last did this successfully... Here are my settings - - I'm using the profiles on an iphone openvpn client to test, with no luck...
The Gargoyle server sits behind my ISP Modem/Router - (is that the problem?)
Otherwise, where am I going wrong? Thanks in advance.
https://photos.app.goo.gl/LWedKM8dzj6WiCSAA
https://photos.app.goo.gl/uZb3kDn7uJM9Phtg7
The Gargoyle server sits behind my ISP Modem/Router - (is that the problem?)
Otherwise, where am I going wrong? Thanks in advance.
https://photos.app.goo.gl/LWedKM8dzj6WiCSAA
https://photos.app.goo.gl/uZb3kDn7uJM9Phtg7
Re: VPN problem
1. You can't have 2 different clients routing the same subnet
2. It doesn't make sense for an iPhone to have a routed subnet
3. iPhones need "prefers VPN gateway" checked.
4. Make sure port 1194 is forwarded from your modem to Gargoyle if your setup requires it
2. It doesn't make sense for an iPhone to have a routed subnet
3. iPhones need "prefers VPN gateway" checked.
4. Make sure port 1194 is forwarded from your modem to Gargoyle if your setup requires it
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: VPN problem
Thank you - I'll give it a shot in the am - cheers!!
Re: VPN problem
I've followed your instructions 1-3 above... as for #4, can I ask you to look at my port settings on the primary router?
I can't seem to get this to work...
https://photos.app.goo.gl/8JqPHxUUWkRoMhkA6
I can't seem to get this to work...
https://photos.app.goo.gl/8JqPHxUUWkRoMhkA6