This is probably a low priority 'nice to have' type of feature but I thought I'd suggest it to this great project
I noticed some firmware allows to set automatic updates, choosing when to check for updates of the firmware and can download and install it (without a reboot) for example.
For this type of project I'd imagine it is not very important but still an interesting idea... let me know what you guys think!
Automatic Updates
Moderator: Moderators
Automatic Updates
Linksys WRT54GL = Gargoyle 1.4.2
TP-Link TL-WR741ND = Gargoyle 1.4.2
Buffalo WZR-HP-G300NH = Gargoyle 1.4.2
http://eduboris.blogspot.com/search/label/Gargoyle
TP-Link TL-WR741ND = Gargoyle 1.4.2
Buffalo WZR-HP-G300NH = Gargoyle 1.4.2
http://eduboris.blogspot.com/search/label/Gargoyle
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Automatic Updates
I don't know if this will be implemented.
1) lots of people use the Bandwidth monitoring/allocation tools
2) some people have tons of rules setup for blocking/allowing sites
They have to manually back this stuff up before each upgrade so
that they don't lose any of the rules/data.
There's always a chance, even if small, for a firmware update to fail.
Losing all that info would be frustrating for those people.
1) lots of people use the Bandwidth monitoring/allocation tools
2) some people have tons of rules setup for blocking/allowing sites
They have to manually back this stuff up before each upgrade so
that they don't lose any of the rules/data.
There's always a chance, even if small, for a firmware update to fail.
Losing all that info would be frustrating for those people.
Soylent Green Is People!
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400