Hi
When TP Link TL-941ND Ver. 5.1 get a gargoyle firmware ...
Kindly any help
TP Link TL-941ND Ver. 5.1 support
Moderator: Moderators
Re: TP Link TL-941ND Ver. 5.1 support
Gargoyle/1.6.2.2/ ftp://tplink-forum.pl/Gargoyle/1.6.2.2/
attitude_adjustment/ar71xx/ http://dl.eko.one.pl/attitude_adjustment/ar71xx/
this firmwares are Polish once you do log gives you the option to English, but
the 2 links are Gargoyle firmwares
the concern here is not the language.
read
Warning:
There are two different versions of the WR941N(D) v5 available:
The old one with FCC-ID TE7WR941NXV4 is supported by this firmware.
The new WR941N(D) v5 with FCC-ID TE7WR941NXV5 gets bricked by this images and requires another firmware.
I seen people brick there router cause they dont pay attention to the Warning linked from DD-WRT web
DD-WRT has a patched factory-to-ddwrt firmware for WR841NDv8 which the WR941NDv5 will accept, but seen people brick them too.
attitude_adjustment/ar71xx/ http://dl.eko.one.pl/attitude_adjustment/ar71xx/
this firmwares are Polish once you do log gives you the option to English, but
the 2 links are Gargoyle firmwares
the concern here is not the language.
read
Warning:
There are two different versions of the WR941N(D) v5 available:
The old one with FCC-ID TE7WR941NXV4 is supported by this firmware.
The new WR941N(D) v5 with FCC-ID TE7WR941NXV5 gets bricked by this images and requires another firmware.
I seen people brick there router cause they dont pay attention to the Warning linked from DD-WRT web
DD-WRT has a patched factory-to-ddwrt firmware for WR841NDv8 which the WR941NDv5 will accept, but seen people brick them too.