Good afternoon everyone.
I would like your help. I have a TPLINK WR841N Router version 9.0 , and yesterday put the 1.7.1 version of the gargoyle in expectation I have the OpenVPN client. But I searched and have not found anything that is in the connections of OpenVPN . How do I install the plugin OpenVPN ? Or is the router that does not support ? I really wanted a simple router only to have it as OpenVPN client.
Thank you for your help
OPENVPN Tplink WR841N - Help!!
Moderator: Moderators
Re: OPENVPN Tplink WR841N - Help!!
Can you help someone else get Gargoyle up and running?
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E
-
- Posts: 3
- Joined: Tue May 12, 2015 11:33 am
Re: OPENVPN Tplink WR841N - Help!!
I tested the information placed here in the forum but I still do not succeed. Apparently the openvpn is not installed
-
- Posts: 3
- Joined: Tue May 12, 2015 11:33 am
Re: OPENVPN Tplink WR841N - Help!!
Does anyone know if this router does not support OpenVPN with Gargoyle ?
Re: OPENVPN Tplink WR841N - Help!!
Ah! The WR841N v9 only has 4mb flash so I suspect that the openVPN component is left out of the Gargoyle build so it will fit.
wiki.openwrt.org/toh/tp-link/tl-wr841nd
wiki.openwrt.org/toh/tp-link/tl-wr841nd
Can you help someone else get Gargoyle up and running?
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E
Re: OPENVPN Tplink WR841N - Help!!
here you find a build of OpenWRT with openvpn and much more
https://forum.openwrt.org/viewtopic.php?id=54604
if you want to try and compile your own Gargoyle build with the modules you need it's quite easy if you have at least a very minimal experience with command line linux. You con even do it on a cloud vps that you pay a few cents per hour.
https://forum.openwrt.org/viewtopic.php?id=54604
if you want to try and compile your own Gargoyle build with the modules you need it's quite easy if you have at least a very minimal experience with command line linux. You con even do it on a cloud vps that you pay a few cents per hour.