Gargoyle-ispy 2014-November-09.7z AA Final
Moderator: Moderators
Re: Gargoyle-ispy 2014-November-09.7z
I've actually had some problems
Had to do a failsafe rest to recover the router
After reset wifi was a bit suspect. Found it was on the same channel as another router.
Changed channels and now working fine
see what happens
Had to do a failsafe rest to recover the router
After reset wifi was a bit suspect. Found it was on the same channel as another router.
Changed channels and now working fine
see what happens
Re: Gargoyle-ispy 2014-November-09.7z
This build is now going like a rocket for me now
key points
- Need to have clean wifi channel
- First time I think I loaded the router up with too much stuff (on the USB stick)
- QOS works excellent (don't know why I haven't really used it before)
key points
- Need to have clean wifi channel
- First time I think I loaded the router up with too much stuff (on the USB stick)
- QOS works excellent (don't know why I haven't really used it before)
Re: Gargoyle-ispy 2014-November-09.7z
only one complaint
Re: Gargoyle-ispy 2014-November-09.7z
Thanks for this build! I have installed this on a new TP-Link TL-WDR3600 v1 router and have had no problems. Changes are made quickly and the router functions quite well. I've also added the registry hack to get channels 12 and 13. I added this newest one, and it seems to work well.
http://luci.subsignal.org/~jow/reghack/
Should I have added this instead per the above website:
The reghack utility replaces the regulatory domain rules in the driver binaries
with less restrictive ones. The current version also lifts the 5GHz radar
channel restrictions in ath9k.
This version is made for current OpenWrt trunk. To patch older releases like 12.09,
use http://luci.subsignal.org/~jow/reghack/old/
Thanks.
http://luci.subsignal.org/~jow/reghack/
Should I have added this instead per the above website:
The reghack utility replaces the regulatory domain rules in the driver binaries
with less restrictive ones. The current version also lifts the 5GHz radar
channel restrictions in ath9k.
This version is made for current OpenWrt trunk. To patch older releases like 12.09,
use http://luci.subsignal.org/~jow/reghack/old/
Thanks.
Re: Gargoyle-ispy 2014-November-09.7z
Everything running without single problemispyisail wrote:only one complaint
Had to restart the router due to power down after 15 days uptime without problem.
Using it for heavy wifi torrents and qos.
For me it's the best build until now.
Thanks to ispyisail for the great work.
Re: Gargoyle-ispy 2014-November-09.7z
been running with this build on 1043ND v1.7 for 5 days now.. no probs and very stable build -ty ispy
x2 Archer C5,C7 - Stock | x1 TL-WA730RE v1 - Openwrt 14.07 | x2 TL-WR1043ND v1.7 - Gargoyle v1.6.X http://goo.gl/VMbxcH | x2 WRT54GL v1.1 Tomato v1.28.7821 MIPSR1-Toastman-ND, 14929_vpn | x1 WHR-HP-G54 - Gargoyle 1.4.7
Re: Gargoyle-ispy 2014-November-09.7z AA Final
Last edited by Bajramo on Tue Dec 30, 2014 7:21 am, edited 3 times in total.
Re: Gargoyle-ispy 2014-November-09.7z AA Final
for me, this version continues to be a champ on my 1043nd's..
x2 Archer C5,C7 - Stock | x1 TL-WA730RE v1 - Openwrt 14.07 | x2 TL-WR1043ND v1.7 - Gargoyle v1.6.X http://goo.gl/VMbxcH | x2 WRT54GL v1.1 Tomato v1.28.7821 MIPSR1-Toastman-ND, 14929_vpn | x1 WHR-HP-G54 - Gargoyle 1.4.7
Re: Gargoyle-ispy 2014-November-09.7z AA Final
yeah its a good build
I think Eric should make a n official AA final on this build
I think Eric should make a n official AA final on this build
Re: Gargoyle-ispy 2014-November-09.7z AA Final
Hi ispyisail,
I have added ping watchdog plugins and when I click it on connection->ping-watchdog, it won't show the ping watchdog page, instead it will show you status info. please advise if do you have any remedy for this problem.
Thank you.
I have added ping watchdog plugins and when I click it on connection->ping-watchdog, it won't show the ping watchdog page, instead it will show you status info. please advise if do you have any remedy for this problem.
Thank you.
Gargoyle 1.9.x on Buffalo WZR-HP-AG300H
Gargoyle 1.10.x on TP-Link Archer C7 v2.0
Gargoyle 1.11.x on WRT3200 acm
Gargoyle 1.10.x on TP-Link Archer C7 v2.0
Gargoyle 1.11.x on WRT3200 acm