I tried the stable realease for the Asus rt-n12 d1 router
It has the broadcom arch in it which I used.
I downloaded the latest stable realease below
gargoyle_1.6.2-brcm47xx-squashfs.trx
Does anyone know if gargoyle can be used on the asus rt-n12 router?
After I installed the router, It failed to send DCHP or SSID broadcasts so I cold not login to change the settings.
I did use DD-WRT on it and it works fine with that. Does gargoyle have the function to turn up the tx antenna power like dd-wrt?
Asus RT-N12-D1 firmware installation fail
Moderator: Moderators
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Asus RT-N12-D1 firmware installation fail
http://wiki.openwrt.org/toh/asus/rt-n12d1
Not supported with Gargoyle yet
Gargoyle is based on OpenWRT
OpenWRT has support for the RT-N12-D1 on the TRUNK version
Trunk is compile-yourself versions - work in progress
Will be a while before Gargoyle supports the RT-N12-D1
Not supported with Gargoyle yet
Gargoyle is based on OpenWRT
OpenWRT has support for the RT-N12-D1 on the TRUNK version
Trunk is compile-yourself versions - work in progress
Will be a while before Gargoyle supports the RT-N12-D1
Soylent Green Is People!
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
Re: Asus RT-N12-D1 firmware installation fail
so in this blog is very nice post
Great information to in this post
for more information see:ESO Gold and TESO Gold at http://www.esosale.com/
Great information to in this post
for more information see:ESO Gold and TESO Gold at http://www.esosale.com/