Binatone WR1500N suitable firmware

[asz]

I have Binatone WR1500N VER 2.0 & 3.0 routers I want to run gargoyle firmware on it plz help me with a suitable firmware & way as I can't find it on any site

[asz]

I got a Binatone wr1500n router from a ISP in which the gargoyle 1.5x was installed but i cant find the firmware anywhere in internet. Is there any way to extract it from the router


Status
Device Name:UltraLite
Version:1.5.X (Built 20140125-0932 git@505e8dc)
Model:Flame-Lite
Device Configuration:Wireless Bridge/Repeater
Memory Usage:11.1MB / 28.7MB (38.6%)
Connections:41/4096
CPU Load Averages:0.16 / 0.14 / 0.06 (1/5/15 minutes)
Uptime:0 days, 0 hours, 2 minutes
Current Date & Time:08/28/14 16:34 UTC-0
Bridge IP Address:192.168.43.3
Bridge Netmask:255.255.255.0
Bridge MAC Address:0C:D2:B5:21:27:EC
LAN Gateway IP:192.168.43.1
Connected Via:Client Bridge
Bridge SSID:asz 3
QoS Upload:Disabled
QoS Download:Disabled

[tapper]

that is what you got from your ISP? with that FW on it?

[asz]

The Point is how can I get my hands on the firmware as I want to install it on another same wireless router :

[asz]

that is what you got from your ISP? with that FW on it?

The Point is how can I get my hands on the firmware as I want to install it on another same wireless router :

Can I extract it from the router, If there is a way?
Can I get it from the site (can't find it with my knowledge), how can I search for it?


The ISP is not giving any info on the firmware (they want us to purchase it from them on 30% extra as in this firmware we can use frequencies from 2.3GHz to 2.5GHz a total 48 Channels).

also, what is the way to customize the gargoyle firmwares.