Wireless network not found

[ago]

Hello, I'm using gargoyle successfully since december. Since I've installed the firmware I never touch it, but yesterday I see the message: Wireless network not found, when I'm trying to scan to activate the client bridge.

Via ssh this is the result of iwlist scan:

Code: Select all

root@Gargoyle:~# iwlist scan
gre0      Interface doesn't support scanning.

lo        Interface doesn't support scanning.

eth1      Interface doesn't support scanning.

wlan0-1   No scan results

imq1      Interface doesn't support scanning.

wlan0     No scan results

eth0      Interface doesn't support scanning.

imq0      Interface doesn't support scanning.

br-lan    Interface doesn't support scanning.

Actually I've updated to 1.5.10..any hint? hw issue?

[ericwong]

Hardware model?

This is definitely software/driver issue if your WIFI was working before.
Try downgrade to another version of gargoyle, maybe there is some changes in the WIFI driver in the latest version that cause your problem.

[ago]

Hardware model?

WR741ND

This is definitely software/driver issue if your WIFI was working before.

No, I have the issue without touch anything, I upgraded for the fun.

[ericwong]

Try 1.5.9

[karembeu]

Hello
Same problem here.
Working in a WR741ND v4 for a month with Gargoyle 1.5.10 with no problems, but today (after changing the SSID to join) appears the error "No Wireless Networks found!".
I try with the 1.5.7, 1.5.9, 1.5.10 (reflashed) with no success
Help!

[ericwong]

Hello
Same problem here.
Working in a WR741ND v4 for a month with Gargoyle 1.5.10 with no problems, but today (after changing the SSID to join) appears the error "No Wireless Networks found!".
I try with the 1.5.7, 1.5.9, 1.5.10 (reflashed) with no success
Help!

Try to do a factory reset of the device or delete the /etc/config/wireless file and reboot.

[karembeu]

Try to do a factory reset of the device or delete the /etc/config/wireless file and reboot.

I try the factory reset, but this did not resolve the issue.
Then delete the file, and againt not resolve the issue.
Any idea?

[ericwong]

Try to do a factory reset of the device or delete the /etc/config/wireless file and reboot.

I try the factory reset, but this did not resolve the issue.
Then delete the file, and againt not resolve the issue.
Any idea?

You could try to install the manufacturer firmware on your router and check if WIFI works, and then put gargoyle back.