Hi all,Does "Gargoyle" support Dlink DIR-320???
If yes that,how to compile custom firmware for Dlink DIR-320???
Thanks
Dlink DIR-320 Support?
Moderator: Moderators
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Dlink DIR-320 Support?
http://forums.whirlpool.net.au/forum-re ... 58515.html
Check that out for the DIR-320 and Gargoyle.
You're going to have to compile your own images, as it needs
the latest Open-WRT version.
It might have direct firmware links too, but be advised, they
do recommend having an adapter to recover if it goes wrong
Check that out for the DIR-320 and Gargoyle.
You're going to have to compile your own images, as it needs
the latest Open-WRT version.
It might have direct firmware links too, but be advised, they
do recommend having an adapter to recover if it goes wrong
Soylent Green Is People!
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
Re: Dlink DIR-320 Support?
Do we still need to compile a version or does the current version support an up-to-date enough OpenWRT?
If so, which image should be used for flashing this device?
If so, which image should be used for flashing this device?