WAN IP address issue
Moderator: Moderators
-
- Posts: 12
- Joined: Sat Dec 24, 2011 10:15 am
WAN IP address issue
For the past two weeks, I've had issues with the router losing WAN IP. I thought it was Verizon FIOS issue, but now, even after lots of troubleshooting with VZ, I can't get it to acquire a WAN IP address. It's a WNDR-3700 v1 with 1.5.10. It's been working fine for years. It seems all this started with 1.5.10. I swapped in my WRT 160N with Tomato USB and it's working fine. Ideas?
-
- Moderator
- Posts: 250
- Joined: Thu Jan 17, 2013 11:43 pm
Re: WAN IP address issue
https://forum.openwrt.org/viewtopic.php?id=41675
see if the clientid in /etc/config/network helps. I don't have an issue with FiOS. Could be a GPON or an ex-GTE issue (I'm neither).
see if the clientid in /etc/config/network helps. I don't have an issue with FiOS. Could be a GPON or an ex-GTE issue (I'm neither).
TP-Link WDR3600 v1.1 running 1.5.10+ L10n-English (Built 20130922 - OpenWrt r38093)
TP-Link WDR4300 running 1.5.10+ i18n-English (Built 20131010 - OpenWrt r38286)
https://github.com/BashfulBladder/gargoyle-plugins/wiki
TP-Link WDR4300 running 1.5.10+ i18n-English (Built 20131010 - OpenWrt r38286)
https://github.com/BashfulBladder/gargoyle-plugins/wiki
-
- Posts: 12
- Joined: Sat Dec 24, 2011 10:15 am
Re: WAN IP address issue
Thanks. That looks like it might be the issue. Wonder why it just started happening with 1.5.10.
-
- Posts: 12
- Joined: Sat Dec 24, 2011 10:15 am
Re: WAN IP address issue
Dumb question, but how do I edit these settings?
-
- Posts: 12
- Joined: Sat Dec 24, 2011 10:15 am
-
- Moderator
- Posts: 250
- Joined: Thu Jan 17, 2013 11:43 pm
Re: WAN IP address issue
You ssh into your router & use an editor. vi comes pre-installed, but I use nano which you have to install:
google the nano manpage to help you out. You might want to make a backup of the file if you aren't totally comforable:
cp /original/path/file.sh /tmp/file.bkup
Code: Select all
opkg update
opgk install nano
nano /path/to/file/to/edit
cp /original/path/file.sh /tmp/file.bkup
TP-Link WDR3600 v1.1 running 1.5.10+ L10n-English (Built 20130922 - OpenWrt r38093)
TP-Link WDR4300 running 1.5.10+ i18n-English (Built 20131010 - OpenWrt r38286)
https://github.com/BashfulBladder/gargoyle-plugins/wiki
TP-Link WDR4300 running 1.5.10+ i18n-English (Built 20131010 - OpenWrt r38286)
https://github.com/BashfulBladder/gargoyle-plugins/wiki
-
- Posts: 12
- Joined: Sat Dec 24, 2011 10:15 am
Re: WAN IP address issue
Thanks. Any idea if and when this issue will be fixed in OpenWRT?
-
- Posts: 12
- Joined: Sat Dec 24, 2011 10:15 am
Re: WAN IP address issue
I made the changes here:
https://dev.openwrt.org/attachment/tick ... ne.2.patch
And it still won't pick up a WAN ip. Could the port itself have issues? How could I tell?
https://dev.openwrt.org/attachment/tick ... ne.2.patch
And it still won't pick up a WAN ip. Could the port itself have issues? How could I tell?
-
- Posts: 12
- Joined: Sat Dec 24, 2011 10:15 am
Re: WAN IP address issue
I tried another WNDR3700 with the same firmware and it does exactly the same thing. So it must be the issue with OpenWRT that's a bug.
-
- Posts: 12
- Joined: Sat Dec 24, 2011 10:15 am
Re: WAN IP address issue
I just learned something last night that affects this issue. Turns out, with FIOS, if you don't release the IP from another router first, then you have to wait 2 hours for a new IP if you shut down a working router. I've done this, and still had issues with 1.5.10, but I've gone back to 1.5.9 and it seems to be working fine.