can't connect through WIFI

Report wireless and/or network connectivity problems in this forum.

Moderator: Moderators

Post Reply
manickam
Posts: 6
Joined: Fri Jun 14, 2013 2:13 am

can't connect through WIFI

Post by manickam »

When i try to connect through WIFI i can see the device in my tab but when i try to connect, the tab is trying to get the IP from the device but it can't get the IP. Please help me i am waiting for your valuable replay.

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: can't connect through WIFI

Post by DoesItMatter »

More info needed:

1) What wireless device is trying to connect to the router?
(Laptop? Android? I-Phone?)
2) What wireless router are you using?
3) What firmware version of Gargoyle is on the router?
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

broadcomfail
Posts: 2
Joined: Mon Sep 23, 2013 2:06 am

Re: can't connect through WIFI

Post by broadcomfail »

I can confirm that:

1. Android
2. Wrt54gS v.5.1 (flashmoded to 4 MB)
3.

Code: Select all

| Gargoyle version 1.4.7    | OpenWrt backfire branch         |
| Gargoyle revision 5783343 | OpenWrt revision r30752         |
| Built February 29, 2012   | Target  brcm47xx/default        |
---------------------------------------------------------------

Code: Select all

root@Gargoyle:~# free
              total         used         free       shared      buffers
  Mem:        13468        12288         1180            0         1080
 Swap:            0            0            0
Total:        13468        12288         1180
root@Gargoyle:~#

Code: Select all

CPU:   0% usr  21% sys   0% nic  71% idle   0% io   7% irq   0% sirq
Load average: 0.04 0.01 0.00 1/34 5439
  PID  PPID USER     STAT   VSZ %MEM %CPU COMMAND
 5439  5433 root     R     1372  10%  14% top
  500     1 root     S     1632  12%   0% /usr/sbin/pppd plugin rp-pppoe.so mt
 1748     1 root     S     1452  11%   0% /usr/bin/ddns_gargoyle -P /etc/ddns_
  942     1 root     S     1440  11%   0% hostapd -P /var/run/wifi-phy0.pid -B
 4590     1 root     S     1384  10%   0% crond -c /etc/crontabs -l 5
  292     1 root     S     1384  10%   0% syslogd -C16
    1     0 root     S     1380  10%   0% init
 5433  5432 root     S     1380  10%   0% -ash
  272     1 root     S     1380  10%   0% init
  294     1 root     S     1368  10%   0% klogd
 1787     1 root     S     1364  10%   0% watchdog -t 5 /dev/watchdog
 1585     1 root     S     1344  10%   0% httpd_gargoyle -c cgi-bin/**|**.sh|*
 5432  1534 root     S     1204   9%   0% /usr/sbin/dropbear -P /var/run/dropb
 1534     1 root     S     1132   8%   0% /usr/sbin/dropbear -P /var/run/dropb
 1696     1 nobody   S      924   7%   0% /usr/sbin/dnsmasq -K -D -y -Z -b -E
  308     1 root     S      784   6%   0% /sbin/hotplug2 --override --persiste
 4435     1 root     S      764   6%   0% /usr/sbin/ntpclient -i 3600 -s -l -D
  904     2 root     SW       0   0%   0% [irq/5-b43]
    3     2 root     SW       0   0%   0% [ksoftirqd/0]
^C522     2 root     SW       0   0%   0% [phy0]
root@Gargoyle:~#

broadcomfail
Posts: 2
Joined: Mon Sep 23, 2013 2:06 am

Re: can't connect through WIFI

Post by broadcomfail »

after pluging off power cord it assign ip but not always , something is wrong or short memory

Post Reply