TP-Link WR842ND - install gargoyle is possible?
Moderator: Moderators
TP-Link WR842ND - install gargoyle is possible?
Guys, how do I install this gargoyle router? I still have the original firmware tp-link.
-
BashfulBladder
- Moderator
- Posts: 250
- Joined: Thu Jan 17, 2013 11:43 pm
Re: TP-Link WR842ND - install gargoyle is possible?
Get the firmware file from the download section.
If you don't know which (factory or sysupgrade), read the 'Atheros AR71XX Routers' section here:
http://www.gargoyle-router.com/wiki/dok ... ed_routers
You may have to shorten the firmware filename.
If you don't know which (factory or sysupgrade), read the 'Atheros AR71XX Routers' section here:
http://www.gargoyle-router.com/wiki/dok ... ed_routers
You may have to shorten the firmware filename.
TP-Link WDR3600 v1.1 running 1.5.10+ L10n-English (Built 20130922 - OpenWrt r38093)
TP-Link WDR4300 running 1.5.10+ i18n-English (Built 20131010 - OpenWrt r38286)
https://github.com/BashfulBladder/gargoyle-plugins/wiki
TP-Link WDR4300 running 1.5.10+ i18n-English (Built 20131010 - OpenWrt r38286)
https://github.com/BashfulBladder/gargoyle-plugins/wiki
Re: TP-Link WR842ND - install gargoyle is possible?
Ok, I did the upgrade procedure: I did the update with the factory and then the sysupgrade is running smoothly, thanks for the info. I only have one more question: how do I bandwich control? I want to make a control by ip range, like, I would use the ip xxx.xxx.xxx.1, from 2 to 254 would be limited to the speed down / up I chose, but do not know how to configure this in the gargoyle. I appreciate if you could help me.