help! G450H brick after flash 1.5.10

Report problems and success stories with Gargoyle on various hardware platforms.

Moderator: Moderators

Post Reply
garuser
Posts: 5
Joined: Tue May 21, 2013 11:51 pm

help! G450H brick after flash 1.5.10

Post by garuser »

sorry for my bad english.
i do a wget of the file and a mtd it,like this
http://www.gargoyle-router.com/wiki/dok ... -hp-g300nh
then the router diag was blink,PC can't get ip from router.
i also try all way to recovery(tftp,Failsafe,30/30/30 RESET)
but not't work.
Can anybody reply and give me some advice?
thank you!

ispyisail
Moderator
Posts: 5212
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: help! G450H brick after flash 1.5.10

Post by ispyisail »


User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: help! G450H brick after flash 1.5.10

Post by DoesItMatter »

WZR-HP-G450H v1 trunk ar71xx Atheros AR7242

Looks like its only supported by TRUNK builds

Serial recovery is the only way to restore.
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

Post Reply