Request: Linux Fonflash for Airlink101 AR430W (DI-300)

[Statik]

I noticed you added part of this post to the documentation. You should probably add build-essentials to the list of packages to install. What I mean is, add the following above libgtk2.0-dev:

Code: Select all

sudo apt-get install build-essentials

That will add all the normal code needed to MAKE anything. The other two were specific to Gargoyle.

Thanks!

Statik

[Statik]

Well, I've installed version 10.0.14, and that has solved the switch issues. The only thing I've noted now is that I don't seem to be able to connect wirelessly with NO security. As soon as I went to WPA PSK (first I've tested) I had a wireless connection. Works great!

Thanks

Statik

[Eric]

Can you please clarify what you mean by "connect wirelessly" ? Are you talking about setting up the router as an access point, as a routed client or as a bridge?

I just tested one of my Fons (which also has an atheros chip), with 1.0.14 as an AP with no encryption and it seems to work fine.

[Statik]

I'm using the router as an access point.
When using no encryption/protection, the laptop sees the router (bssid is working), and attempts to connect. It requests DHCP, but never gets a response. It doesn't seem to timeout either. I'm not 100% sure the problem is on the router side either.

It isn't a problem for me, however, as I intended to use encryption anyway.

Can you add a feature to unmask the key/password for encryption?

Thanks again!

Statik

[DoesItMatter]

What I always did was have Notepad open and type any thing
I wanted as a password in there first, then just did a cut/paste

That way I knew for sure it was typed correctly, and I could
store the file on a USB key to move to other computers