Flash OM1P with 1.5.9

Report problems and success stories with Gargoyle on various hardware platforms.

Moderator: Moderators

Post Reply
jkimmel
Posts: 2
Joined: Tue Feb 05, 2013 3:55 pm

Flash OM1P with 1.5.9

Post by jkimmel »

That' what I tried.

Wlan LED does not come up.

Can not access via telnet.

Flashing with Kamikaze from Ozel was successfull.

Need some hints.

jkimmel
Posts: 2
Joined: Tue Feb 05, 2013 3:55 pm

Re: Flash OM1P with 1.5.9

Post by jkimmel »

I now started with flashing the ozel files.
From there I managed to install Gargoyle.
I'm now on 1.2.0
From there I could upgrade with a sysupgrade file.

Where do I find sysugrade files?

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: Flash OM1P with 1.5.9

Post by DoesItMatter »

Latest version you should try on that is 1.2.5

gargoyle_1.2.5-atheros-combined.squashfs.img
(combined below files in 1 file)

gargoyle_1.2.5-atheros-root.squashfs
gargoyle_1.2.5-atheros-vmlinux.lzma


There is no sysupgrade file for these devices.

If your router only has 16MB of RAM, you should not flash anything
higher than 1.2.5 -- You really need a 32MB router for Gargoyle.
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

Post Reply