do you know how to fix it?
7PBHChD wrote:yc3948 wrote:jkemenade wrote:Resolved it the hard way: re-install v1.5.9 and manually entered all settings (as opposite to restore the backup from v1.5.8)
John
Hi John could you test for me please see if you have same issue, thanks
yc3948 wrote:when you set "All Client Traffic" openvpn connected access internet through explorer should use openvpn Server public IP, it working fine on 1.5.5, but on 1.5.9 "All Client Traffic" still use your own public IP (same as set " Only Traffic Destined for Hosts Behind VPN")
"Allow Clients To Communicate With Each Other" alson not working, can't see other Clients on the LAN
I'm not John but have the same issue with public IP.
As I understand there is no route to Internet through your private router (Gargoyle) when OpenVPN is connected.
Check yours routes with Net Swiss Tool. When OpenVPN is connected your traffic goes through default gateway which is still primary connection gateway.
Iface Destination Gateway Flags RefCnt Use Metric Mask MTU Window IRTT
ccmni0 213.87.0.1 0.0.0.0 5 0 0 0 255.255.255.255 0 0 0
ccmni0 172.29.41.221 0.0.0.0 5 0 0 0 255.255.255.255 0 0 0
ccmni0 213.87.1.1 0.0.0.0 5 0 0 0 255.255.255.255 0 0 0
tun0 192.168.1.0 10.8.0.1 3 0 0 0 255.255.255.0 0 0 0
tun0 10.8.0.0 0.0.0.0 1 0 0 0 255.255.255.0 0 0 0
ccmni0 172.29.0.0 0.0.0.0 1 0 0 0 255.255.0.0 0 0 0
ccmni0 0.0.0.0 172.29.41.221 3 0 0 0 0.0.0.0 0 0 0
Through Gargoyle gateway goes traffic only to your local Gargoyle subnet (192.168.1.0 in my case)[/quote]