Impossible to login

[jorgemiguel4]

No, it's necessary to convert the signal.

[phrunt]

is this the cable I need

http://www.ebay.com.au/itm/USB-2-0-to-T ... 4aaf1e6432

[jorgemiguel4]

Yes, it will work.

[petysku]

I'm winer:) The router is now corect. Here is my instruction:
1) On your PC manualy change IP address to 192.168.1.2 and mask 255.255.255.0. Conect cabel between your PC and router (only to LAN port, not WAN)
2) see this video: http://www.youtube.com/watch?v=GVIrpJVebyE ... after turn on press button (on front panel with label QSS) and try

Code: Select all

ping 192.168.1.1

if you have positive anwer then connect via TELNET...

Code: Select all

telnet 192.168.1.1

3) If you see connect than use this command:
mount root

Code: Select all

mount_root

change password - I think this command is not necessary

Code: Select all

passwd

erase rootfs

Code: Select all

mtd -r erase rootfs_data

4) reboot and go to pub and celebrate

[jorgemiguel4]

You said first that FailSafe isn't working

[phrunt]

that won't work for me, fail safe doesn't work, it thinks its working but I can't get a ping response or can't telnet to 192.168.1.1, can't even port scan and find it.

[petysku]

New problem. I connected to the router via serial USB TTL. In Putty I see this report

error from USB TTL

error.jpg (90.47 KiB) Viewed 6234 times

exist any way to fix this bug?

[jorgemiguel4]

The error is normal, since it's bricked.

It stop there?

[petysku]

Yes, the boot on last line stop and starts again from the beginning

[jorgemiguel4]

It never shows something like "Autobooting in 1 seconds"??