Impossible to login
Moderator: Moderators
Re: Impossible to login
failsafe appears to work, the sys light flashes rapidly once its in failsafe mode and it disappears off the ip address I've set for it which is 192.168.0.2, but it doesn't go to 192.168.1.1, I have no idea what happens, it doesn't seem to get an IP when in failsafe mode. Is it possible its on another address? I can't get a ping response from 192.168.1.1 nor can I Telnet or SSH to 192.168.1.1. when in failsafe mode, when not in failsafe mode I can go to 192.168.0.2 with the web interface and with ssh but I don't know the password it wants.
-
- Posts: 85
- Joined: Thu Dec 29, 2011 2:17 pm
Re: Impossible to login
Have you set manually your computer's IP address to 192.168.1.2?
Re: Impossible to login
yes I did, I also set gateway and dns to 192.168.1.1 just incase that was required, is there a specific port I should be using, I've tried wan and all 4 ports though but it didn't seem to make a difference.
-
- Posts: 85
- Joined: Thu Dec 29, 2011 2:17 pm
Re: Impossible to login
I can't understand what's going on with your router.
Re: Impossible to login
once it was in failsafe mode I used a port scanner to try find a response from it, but nothing... it doesn't exist on 192.168.1.1
the most frustrating thing is the router is working, it works as a dhcp server for wired connections and you can go to the login screen no problems... just can't login.
pressing the reset button on the router must do something to have caused this issue. Gargoyle needs a BIG warning on the download for the TPLink's NOT TO PRESS RESET as its just going to brick everyones router.
the most frustrating thing is the router is working, it works as a dhcp server for wired connections and you can go to the login screen no problems... just can't login.
pressing the reset button on the router must do something to have caused this issue. Gargoyle needs a BIG warning on the download for the TPLink's NOT TO PRESS RESET as its just going to brick everyones router.
-
- Posts: 85
- Joined: Thu Dec 29, 2011 2:17 pm
Re: Impossible to login
I have used reset button with the very last compilation with no problem...
Don't know what happened with yours. Do you have access to a Serial TTL USB cable?
Don't know what happened with yours. Do you have access to a Serial TTL USB cable?
Re: Impossible to login
I don't understand what you mean with USB cable. Can you detailen describe your solution?
If I reset the router the DHCP setting didn't change.
If I reset the router the DHCP setting didn't change.
-
- Posts: 85
- Joined: Thu Dec 29, 2011 2:17 pm
Re: Impossible to login
Basically you have to do something like this:
Connect to your router with Putty via Serial, load a firmware image via TFTP to RAM and flash it.
Make sure you know exactly what you are doing. If unsure it's better to ship the router to someone who knows.
Connect to your router with Putty via Serial, load a firmware image via TFTP to RAM and flash it.
Make sure you know exactly what you are doing. If unsure it's better to ship the router to someone who knows.
Re: Impossible to login
It is a challenge:)
So I connect serial TTL USB cable. I understand and than I use IP router address to send BIN file with firmware? It is true?
So I connect serial TTL USB cable. I understand and than I use IP router address to send BIN file with firmware? It is true?
Re: Impossible to login
can you cut the end off a standard usb cable and connect it like that or does it have to be something special?