I upgraded to the attitude adjustment build and I have been having a lot of trouble with my 2.4 Ghz radio.
It works intermittently, but when I try to connect I usually get a "A connection timeout occurred". The previously flaky 5Ghz channel works like a charm and logread didn't return anything interesting...
Anyone else having problems?
1.5.7 and Netgear WNDR3700 2.4Ghz
Moderator: Moderators
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: 1.5.7 and Netgear WNDR3700 2.4Ghz
What is your encryption and bandwidth/channel settings?
I checked mine and I don't see any of that "Radius" stuff.
Try simpler and then step up.
Try 20mhz and WEP encryption on 1 channel
If that works, then try 20mhz WPA on 1 channel
Then 20 mhz WPA2-PSK on 1 channel
Then 40 mhz WPA2-PSK on a set of channels
That will help you troubleshoot where the issue is.
I checked mine and I don't see any of that "Radius" stuff.
Try simpler and then step up.
Try 20mhz and WEP encryption on 1 channel
If that works, then try 20mhz WPA on 1 channel
Then 20 mhz WPA2-PSK on 1 channel
Then 40 mhz WPA2-PSK on a set of channels
That will help you troubleshoot where the issue is.


2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
-
- Posts: 7
- Joined: Wed Oct 03, 2012 12:02 pm
Re: 1.5.7 and Netgear WNDR3700 2.4Ghz
I am having the exact same issue, except with 5Ghz.

Seems to only rear it's ugly head every week or two of uptime.

Seems to only rear it's ugly head every week or two of uptime.
-
- Posts: 28
- Joined: Tue Jun 26, 2012 11:03 am
Re: 1.5.7 and Netgear WNDR3700 2.4Ghz
I also have tons of issues on WNDR3700v2 with 1.5.7. Mainly devices that drop connection would not reconnect back to the router. Looking at the list of connected hosts, they appear to be connected and yet, none of them would reconnect until I reboot the router. All my devices are entered in the DHCP list, if that helps pinpoint to the bug. I don't see this being specific to 2.4 or 5 channel, ie my Google Nexus phone connects to both but when it gets stuck, if won't connect to any channel anymore. My Nexus7 does only 2.4 and if the router has not been rebooted for a couple of days, and I reboot the Nexus7, it'll NOT connect. Same with the Wii and the 3DS consoles.
Marv
Marv
-
- Posts: 7
- Joined: Wed Oct 03, 2012 12:02 pm
Re: 1.5.7 and Netgear WNDR3700 2.4Ghz
Looks like we're in the SAME EXACT boat. I first noticed it on my Nexus as well. I thought it was just my Nexus acting up, but then I reproduced the same behavior on my HTPC (a Mac Mini) when I had to reboot it.marvinandro wrote:I also have tons of issues on WNDR3700v2 with 1.5.7. Mainly devices that drop connection would not reconnect back to the router. Looking at the list of connected hosts, they appear to be connected and yet, none of them would reconnect until I reboot the router. All my devices are entered in the DHCP list, if that helps pinpoint to the bug. I don't see this being specific to 2.4 or 5 channel, ie my Google Nexus phone connects to both but when it gets stuck, if won't connect to any channel anymore. My Nexus7 does only 2.4 and if the router has not been rebooted for a couple of days, and I reboot the Nexus7, it'll NOT connect. Same with the Wii and the 3DS consoles.
Marv
I have a feeling it has something to do with the DHCP lease times.
I'd downgrade to 1.5.6 but I am fairly lazy...
Is this a new issue from just this past release, or has it been around for awhile?
-
- Posts: 28
- Joined: Tue Jun 26, 2012 11:03 am
Re: 1.5.7 and Netgear WNDR3700 2.4Ghz
It sounds like only you and I are having that issue. I'll start a new thread under 1.5.8 as I upgraded and the issues is still there. I didn't have to reboot the router daily until 1.5.7.