Tryexcelsi wrote: Can somebody tell me where i can find these logs from the command line after i established a telnet seessions to the router?
logread
dmesg
Moderator: Moderators
Tryexcelsi wrote: Can somebody tell me where i can find these logs from the command line after i established a telnet seessions to the router?
I know you mentioned the reset button doing nothing, but have you tried TFP?ZoomThru wrote: Tried to connect with ssh (putty) but couldn't connect and really don't have any real clue here what to do.
Can you check if the equivalent OpenWRT build, i.e. attitude_adjustment branch, not gargoyle also have the same problem?olo wrote:I report that Wi-Fi is still unstable on Asus WL-500-gP V2 - crashes 1-2 times per 24h.
Looks like there is an issue with your QoS rule and also possibly your network configuration not being ideal. e.g. why do you need another QoS rule on the wireless repeater when you already have one at the master router?Dev_BR wrote: - QoS "Normal" Rule Max BW = 700k for Destination: 192.168.2.100
QoS(Upload) dont work !
Cause 192.168.2.100 is my PC and I use it for test.ericwong wrote:
Looks like there is an issue with your QoS rule and also possibly your network configuration not being ideal. e.g. why do you need another QoS rule on the wireless repeater when you already have one at the master router?
Why do you set Destination: 192.168.2.100 ?
This seems to be the reason why QoS is not working for you...
Dev_BR wrote:Cause 192.168.2.100 is my PC and I use it for test.ericwong wrote:
Looks like there is an issue with your QoS rule and also possibly your network configuration not being ideal. e.g. why do you need another QoS rule on the wireless repeater when you already have one at the master router?
Why do you set Destination: 192.168.2.100 ?
This seems to be the reason why QoS is not working for you...
I had a lot of QoS rules in 1.5.6 and all seems to work ok.
It was a desperate attempt.
I tried to activate QoS individually on each of the routers.
Very bad news: one of the routers does not accept the password.
I can access the web user interface and prompt via SSH.
The reset button does not respond!
And no, I have not tried to preserve the previous settings