nanostation 2

[hkfunk27]

Hi Just a quick question,want to load v 1.04 of gargoyle on nanostation 2,which build should i use.There so many,and can it be flashed straight from the gui of the nano still?

[Eric]

I believe the nanostation is one of the few devices the default upgrade utility doesn't work on, since it doesn't use the seperate rootfs/kernel files. You'll need a ubnt2-squashfs.bin image, but for now the latest release with that image is 1.0.0. For anything more recent than 1.0.0, you'll probably need to recompile from source.

[hkfunk27]

Any chance of someone pls building a installable firmware for nanostation 2?that can be flashed straight from the nanostations existing firmware?of the latest build?

Like this http://www.gargoyle-router.com/images/a ... uashfs.bin

but the latest 1.05.1.07 released.pls guys!relay want to use this but dont have the skills the build this myself.any help would be greatly apreciated!

[Eric]

How about a 1.0.8 build?

[hkfunk27]

That would be awesome!would it be to much to ask to enable external antenna support for the nanostation2? haha thnx eagerly awating 1.08 build.and thnx again!!

[DoesItMatter]

Click the link above!

That blue-link that eric posted is the 1.0.8 download

[hkfunk27]

OK,going to take the plunge.going to flash form gui.i still need to enable the external antenna afterwards correct?by pasting this in

init.d?

sysctl set dev.wifi0.softled 0
gpioctl 7 0

is this easy to do?any simple guide anywhere?Thnx!