invalid password
Moderator: Moderators
invalid password
sory i m not english.
after Upgrade Firmware gargoyles.bin.
the furst password was not password.
1. Install Wireshark on your computer.
2. Configure your computer with static IP 192.168.1.2
3. Connect your computer to a LAN port on the router.
4. Start Wireshark and monitor the LAN connection.
5. Powerup your router, when wireshark shows the first packet from 192.168.1.1 immediately press and hold the reset button on the back of the router for three seconds.
6. Router power LED should be flashing quickly. (Failsafe mode)
7. From a command prompt on your computer “telnet 192.168.1.1”
8. From the command prompt of the router “firstboot”
9. Reboot your router which should now come up in its default Gargoyle configuration.
thank you.
after Upgrade Firmware gargoyles.bin.
the furst password was not password.
1. Install Wireshark on your computer.
2. Configure your computer with static IP 192.168.1.2
3. Connect your computer to a LAN port on the router.
4. Start Wireshark and monitor the LAN connection.
5. Powerup your router, when wireshark shows the first packet from 192.168.1.1 immediately press and hold the reset button on the back of the router for three seconds.
6. Router power LED should be flashing quickly. (Failsafe mode)
7. From a command prompt on your computer “telnet 192.168.1.1”
8. From the command prompt of the router “firstboot”
9. Reboot your router which should now come up in its default Gargoyle configuration.
thank you.
Re: invalid password
Instead of using wireshaek why not use command line?Start Wireshark and monitor the LAN connection.
Code: Select all
cmd
ping 192.168.1.1 -t
Re: invalid password
beceause i m not good with command line.
with gargoyle_1.5.6-ar71xx-tl-mr3420-v1-squashfs-sysupgrade.bin firmware i try again and y have the same problem.
password is not password.
3G is working with gargoyles?
i can t do it.
i try to do 3G with openwrt but it s too complicate for me.
with gargoyle_1.5.6-ar71xx-tl-mr3420-v1-squashfs-sysupgrade.bin firmware i try again and y have the same problem.
password is not password.
3G is working with gargoyles?
i can t do it.
i try to do 3G with openwrt but it s too complicate for me.
Re: invalid password
yes but only some dongles3G is working with gargoyles?
Re: invalid password
i have
-serra compass 889
-huawei e 169
with ariginal firmare the two dongles are recognized but upload is not working.
that why i m looking for an other firmware.
-serra compass 889
-huawei e 169
with ariginal firmare the two dongles are recognized but upload is not working.
that why i m looking for an other firmware.
Re: invalid password
looks like you have a few issues
password and 3g
both work fine for me
we can explore both of these issues more if you want to put in a little work?
password and 3g
both work fine for me
we can explore both of these issues more if you want to put in a little work?
Re: invalid password
can you tell us router model and version
screen shots of any information really helps
screen shots of any information really helps
Re: invalid password
http://wiki.openwrt.org/es/doc/howto/3g.mr3220
i know but it s so dificult for me.
i read also http://wiki.openwrt.org/doc/recipes/3gdongle but i dont andurstant everything.
my router is tp-link tl-mr3420 ver:1.2
i know but it s so dificult for me.
i read also http://wiki.openwrt.org/doc/recipes/3gdongle but i dont andurstant everything.
my router is tp-link tl-mr3420 ver:1.2
Re: invalid password
lets talk about your password problem
what browser are you using to connect with?
There have been some reported problems with firefox
what browser are you using to connect with?
There have been some reported problems with firefox