I have an Alix 2D2 board with Gargoyle 1.5.5. I try to restore default config using the web UI and my settings are always kept. I also tried to re-install the image without the "preserve settings" option enabled: no success.
So how can I reset to factory the device, without having to re-flash my CF?
Alix - Restore default configuration doesn't work
Moderator: Moderators
-
DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Alix - Restore default configuration doesn't work
Telnet into your Alix
Type this command:
firstboot
Then let the router reboot and see if it resets to defaults
If it does not - re-flash the firmware
Type this command:
firstboot
Then let the router reboot and see if it resets to defaults
If it does not - re-flash the firmware
Soylent Green Is People! 2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400