2M max and 1M min BW

[Dev_BR]

HI

I want to create 3 download rules:
1 - "2M_max", 2Mbps max. BW, no min BW
2 - "1M_minA" 1Mbps min BW, no max limit
3 - "1M_minA" 1Mbps min BW, no max limit

Rule 1, "2M_max", is to share up 2Mbps for two hosts, so Host A and B will share same rule 2M_max

Rule 2 and 3 is to garantee minimum BW for that 2 hosts, at 1Mpbs

So, if one host is connected at full load, it can use up to 2Mbps, but if Host A and Host B are connected at full load, total BW will be 2Mbps, 1Mbps for each one.

Is it possible ?

[Dev_BR]

HI

I want to create 3 download rules:
1 - "2M_max", 2Mbps max. BW, no min BW
2 - "1M_minA" 1Mbps min BW, no max limit
3 - "1M_minA" 1Mbps min BW, no max limit

Rule 1, "2M_max", is to share up 2Mbps for two hosts, so Host A and B will share same rule 2M_max

Rule 2 and 3 is to garantee minimum BW for that 2 hosts, at 1Mpbs

So, if one host is connected at full load, it can use up to 2Mbps, but if Host A and Host B are connected at full load, total BW will be 2Mbps, 1Mbps for each one.

Is it possible ?

Tested, It do not work.
1 - "2M_max", 2Mbps max. BW, no min BW ->Host A and Host B
2 - "1M_minA" 1Mbps min BW, no max limit ->Host A
3 - "1M_minA" 1Mbps min BW, no max limit ->HostB

the 3 rules never work same time. I can see load at rule 1, but no load at rules 2 and 3.

[pbix]

If you are using v1.5.4 then the one class should automatically do what you want because classes always share per IP equally.

There is no need for the other classes.