I needed to execute a tracert just now and noticed the following output.
1 1 ms 1 ms 1 ms 192.168.1.1
2 18 ms 9 ms 18 ms 10.85.0.1
I expect the 192.168.1.1 but the 10.85.0.1 throws me? Is there some process that runs in the router that has an internal IP address? Maybe the QoS Service?
It is also listed as a host with an active connection on the Connected Hosts page with an unknown hostname and an unknown host MAC.
Can someone confirm this is what should be happening?
Hosts with Active Connections 10.85.0.1
Moderator: Moderators
Hosts with Active Connections 10.85.0.1
Paul
Gargoyle 1.11.x on TP-Link Archer C7 V2 H/W
Gargoyle 1.11.x on TP-Link Archer C7 V2 H/W
Re: Hosts with Active Connections 10.85.0.1
Post the output of the full traceroute to this thread.
WRT54GL v1.1
Gargoyle 1.4.7
Gargoyle 1.4.7
Re: Hosts with Active Connections 10.85.0.1
I think I may know the problem, I will check tonight. I have connected to my company's VPN from home and I think that the address is the address of the VPN access point.
I'm not sure why though it's persisting after I've disconnected. Perhaps I need to officially logout rather than just shutdown. I'll give it a go tonight and report back.
I'm not sure why though it's persisting after I've disconnected. Perhaps I need to officially logout rather than just shutdown. I'll give it a go tonight and report back.
Paul
Gargoyle 1.11.x on TP-Link Archer C7 V2 H/W
Gargoyle 1.11.x on TP-Link Archer C7 V2 H/W
Re: Hosts with Active Connections 10.85.0.1
Still havn't figured it out. Current connections show below. Here's a tracert from my PC to www.google.com.
>tracert www.google.com
Tracing route to www.l.google.com [74.125.237.115]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms Gargoyle.lan [192.168.1.1]
2 95 ms 75 ms 116 ms 10.85.0.1
3 51 ms 19 ms 38 ms sbr4-ge2-1-7.gw.optusnet.com.au [198.142.160.49]
4 38 ms 13 ms 58 ms xe-3-1-0.sd31.optus.net.au [119.225.41.253]
5 * * * Request timed out.
6 29 ms 16 ms 48 ms google.sd13.optus.net.au [119.225.36.2]
7 17 ms 62 ms 15 ms 66.249.95.232
8 24 ms 59 ms 11 ms 72.14.237.135
9 43 ms 80 ms 29 ms syd01s12-in-f19.1e100.net [74.125.237.115]
Trace complete.
I'm using OpenDNS as my DNS, don't know if that has anything to do with it or not.
Since Port 67 has to do with DHCP, perhaps it has something to do with the way the DHCP service works in OpenWRT???
>tracert www.google.com
Tracing route to www.l.google.com [74.125.237.115]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms Gargoyle.lan [192.168.1.1]
2 95 ms 75 ms 116 ms 10.85.0.1
3 51 ms 19 ms 38 ms sbr4-ge2-1-7.gw.optusnet.com.au [198.142.160.49]
4 38 ms 13 ms 58 ms xe-3-1-0.sd31.optus.net.au [119.225.41.253]
5 * * * Request timed out.
6 29 ms 16 ms 48 ms google.sd13.optus.net.au [119.225.36.2]
7 17 ms 62 ms 15 ms 66.249.95.232
8 24 ms 59 ms 11 ms 72.14.237.135
9 43 ms 80 ms 29 ms syd01s12-in-f19.1e100.net [74.125.237.115]
Trace complete.
I'm using OpenDNS as my DNS, don't know if that has anything to do with it or not.
Since Port 67 has to do with DHCP, perhaps it has something to do with the way the DHCP service works in OpenWRT???
- Attachments
-
- Capture.PNG (2.17 KiB) Viewed 7182 times
Paul
Gargoyle 1.11.x on TP-Link Archer C7 V2 H/W
Gargoyle 1.11.x on TP-Link Archer C7 V2 H/W
Re: Hosts with Active Connections 10.85.0.1
Looks like your ISP gateway and the connection looks like your DHCP connection to your ISP. Are you using DHCP for your WAN connection type?
Look at your status screen under WAN. What is the gateway?
Look at your status screen under WAN. What is the gateway?
Linksys WRT1900ACv2
Netgear WNDR3700v2
TP Link 1043ND v3
TP-Link TL-WDR3600 v1
Buffalo WZR-HP-G300NH2
WRT54G-TM
Netgear WNDR3700v2
TP Link 1043ND v3
TP-Link TL-WDR3600 v1
Buffalo WZR-HP-G300NH2
WRT54G-TM
Re: Hosts with Active Connections 10.85.0.1
Yeah, 10.85.0.1 is on your isp's internal network. Plenty of isp's use private ip addresses for their internal network, even mine:
Tracing route to http://www.l.google.com [74.125.113.106]
over a maximum of 30 hops:
1 3 ms 2 ms 2 ms Gargoyle.lan [192.168.3.1]
2 * * * Request timed out.
3 12 ms 12 ms 12 ms 10.15.25.126
4 12 ms 12 ms 13 ms 10.15.8.49
5 55 ms 28 ms 28 ms core1-0-0-8.lga.net.google.com [198.32.118.39]
6 26 ms 28 ms 28 ms 209.85.248.180
7 29 ms 36 ms 26 ms 209.85.251.88
8 62 ms 53 ms 32 ms 72.14.239.93
9 46 ms 44 ms 44 ms 209.85.241.222
10 46 ms 44 ms 43 ms 64.233.174.87
11 * 54 ms * 216.239.47.250
12 45 ms 44 ms 44 ms vw-in-f106.1e100.net [74.125.113.106]
Trace complete.
Tracing route to http://www.l.google.com [74.125.113.106]
over a maximum of 30 hops:
1 3 ms 2 ms 2 ms Gargoyle.lan [192.168.3.1]
2 * * * Request timed out.
3 12 ms 12 ms 12 ms 10.15.25.126
4 12 ms 12 ms 13 ms 10.15.8.49
5 55 ms 28 ms 28 ms core1-0-0-8.lga.net.google.com [198.32.118.39]
6 26 ms 28 ms 28 ms 209.85.248.180
7 29 ms 36 ms 26 ms 209.85.251.88
8 62 ms 53 ms 32 ms 72.14.239.93
9 46 ms 44 ms 44 ms 209.85.241.222
10 46 ms 44 ms 43 ms 64.233.174.87
11 * 54 ms * 216.239.47.250
12 45 ms 44 ms 44 ms vw-in-f106.1e100.net [74.125.113.106]
Trace complete.
WRT54GL v1.1
Gargoyle 1.4.7
Gargoyle 1.4.7
Re: Hosts with Active Connections 10.85.0.1
Hi,
I have noticed that some virtual machines will install a virtual adapter vbox and vmware in particular. Do you have these installed on any machine on your network?
jFlash
I have noticed that some virtual machines will install a virtual adapter vbox and vmware in particular. Do you have these installed on any machine on your network?
jFlash
Re: Hosts with Active Connections 10.85.0.1
Nope. The major devices I have installed are:jFlash wrote:Hi,
I have noticed that some virtual machines will install a virtual adapter vbox and vmware in particular. Do you have these installed on any machine on your network?
jFlash
Minitar VoIP box MVA-11A
2 Squeezebox Booms (Logitech)
couple printers, one wired, one wireless
1 Synology 110j NAS
various iphone/Android
1 TP-Link SF1005D 5 port switch
Paul
Gargoyle 1.11.x on TP-Link Archer C7 V2 H/W
Gargoyle 1.11.x on TP-Link Archer C7 V2 H/W