QoS Max Bandwidth
Moderator: Moderators
QoS Max Bandwidth
Hi
I created a Service Class Name: "teste" for Down and Upload
It Bandwidth Maximum is Up 50 Kbit/s, Down 100 kbit/s
Now, when I active it for one fixed IP Host, the download and upload is not limited to 50 neither 100 kbit/s, as it should be (?)
Any help ?
TP LINK MR3420
Gargoyle Version:1.5.2
Device Configuration:Gateway
I created a Service Class Name: "teste" for Down and Upload
It Bandwidth Maximum is Up 50 Kbit/s, Down 100 kbit/s
Now, when I active it for one fixed IP Host, the download and upload is not limited to 50 neither 100 kbit/s, as it should be (?)
Any help ?
TP LINK MR3420
Gargoyle Version:1.5.2
Device Configuration:Gateway
Re: QoS Max Bandwidth
Please delete all your quotas. Do not confuse quotas with QoS.
Please post your connection screen and the rules from your QoS page.
Please post your connection screen and the rules from your QoS page.
Linksys WRT1900ACv2
Netgear WNDR3700v2
TP Link 1043ND v3
TP-Link TL-WDR3600 v1
Buffalo WZR-HP-G300NH2
WRT54G-TM
Netgear WNDR3700v2
TP Link 1043ND v3
TP-Link TL-WDR3600 v1
Buffalo WZR-HP-G300NH2
WRT54G-TM
Re: QoS Max Bandwidth
ok, no quotas.
Just a simple rule in QoS, one for 100Kbit/s max upload for my PC and other 300Kbit/s max download.
It return about:
104Kbit/s Up (OK)
and
1.3Mbit/s Down
My intention in using quotas, is to filter and block the IPs are not listed. But this is another topic
Tks
Just a simple rule in QoS, one for 100Kbit/s max upload for my PC and other 300Kbit/s max download.
It return about:
104Kbit/s Up (OK)
and
1.3Mbit/s Down
My intention in using quotas, is to filter and block the IPs are not listed. But this is another topic
Tks
- Attachments
-
- basic.jpg (155.17 KiB) Viewed 8511 times
-
- 300k Down
- 300k download.jpg (223.46 KiB) Viewed 8511 times
-
- 100k up
- 100k upload.jpg (214.99 KiB) Viewed 8511 times
Re: QoS Max Bandwidth
Other printscreen
The Gargoyle router is PPPOe connected to an ADSL modem, in bridge mode. The modem is w/ DHCP enabled.
Any other screen ?
The Gargoyle router is PPPOe connected to an ADSL modem, in bridge mode. The modem is w/ DHCP enabled.
Any other screen ?
- Attachments
-
- DHCP.jpg (166 KiB) Viewed 8511 times
Re: QoS Max Bandwidth
You did not post the connections screen as I asked. On this screen you can verify that your rules are correctly classifying your traffic.
If you did I think you will see that you are not correctly classifying because your download rule is wrong. Normally on download we use the destination IP and on upload the source IP. You have source IP on both.
If you did I think you will see that you are not correctly classifying because your download rule is wrong. Normally on download we use the destination IP and on upload the source IP. You have source IP on both.
Linksys WRT1900ACv2
Netgear WNDR3700v2
TP Link 1043ND v3
TP-Link TL-WDR3600 v1
Buffalo WZR-HP-G300NH2
WRT54G-TM
Netgear WNDR3700v2
TP Link 1043ND v3
TP-Link TL-WDR3600 v1
Buffalo WZR-HP-G300NH2
WRT54G-TM
Re: QoS Max Bandwidth
Do you mean Status > Connected Hosts ??
I want to limit bandwidth for a specific host (local IP).
I want to limit bandwidth for a specific host (local IP).
Re: QoS Max Bandwidth
Seperate from pbix's response on your qos download screen I see no load on their that demonstrates it has exceeded the max bandwidth.
Also one for pbix or someone that knows, if only one class is active does the max bandwidth still kick in?
Also one for pbix or someone that knows, if only one class is active does the max bandwidth still kick in?
Netgear wndr3700 v2 Gargoyle 1.8.0
TP-Link Archer C7 v2 1.10.X (Built 20180122-0707)
TP-Link Archer C7 v2 1.10.X (Built 20180122-0707)
Re: QoS Max Bandwidth
It limit max. upload under same conditions
Re: QoS Max Bandwidth
I mean Status->Connection List. When you get your rules correct you will see that all connections from the hosts get put into the correct class.Dev_BR wrote:Do you mean Status > Connected Hosts ??
Max bandwidth is always enforced regardless of the number of active classes.tals wrote:if only one class is active does the max bandwidth still kick in?
Linksys WRT1900ACv2
Netgear WNDR3700v2
TP Link 1043ND v3
TP-Link TL-WDR3600 v1
Buffalo WZR-HP-G300NH2
WRT54G-TM
Netgear WNDR3700v2
TP Link 1043ND v3
TP-Link TL-WDR3600 v1
Buffalo WZR-HP-G300NH2
WRT54G-TM
Re: QoS Max Bandwidth
You are correct.pbix wrote: If you did I think you will see that you are not correctly classifying because your download rule is wrong. Normally on download we use the destination IP and on upload the source IP. You have source IP on both.
I changed destination IP for my Host IP and now I can see rule in action.
Thank you. Nice work !