Page 1 of 3

Router Speed tests

Posted: Sun Aug 23, 2015 3:28 am
by ispyisail
Hi all

As internet speeds are increasing we are finding routers limits

It would be good to get a list of speeds

I use http://www.totusoft.com/lanspeed.html using Ethernet cables only through LAN to WAN

Image

Router-station Pro (Gargoyle 1.8)
95Mbps Down 95Mbps Up - Believe the limit is hardware (WAN port)

TP-Link TL-WDR3600 (Gargoyle 1.8)
138Mbps Down 144Mbps Up

TP-Link TL-WR1043N/ND v1 (Gargoyle 1.8)
105Mbps Down 118Mbps Up

Re: Router Speed tests

Posted: Sun Aug 23, 2015 4:22 am
by Lantis
can i get details on how you're testing lan to wan? also how are you sure that it traverses NAT (which is the real bottleneck)?

Re: Router Speed tests

Posted: Sun Aug 23, 2015 4:43 am
by ispyisail
see diagram

I did think about fixing the IP of the WAN port and PC1 but that was going to be more work. I suspose LAN to LAN could be a problem on router1?

Re: Router Speed tests

Posted: Tue Sep 01, 2015 4:23 am
by DoesItMatter
Your other limitation is computer hardware.

Unless you are testing between 2 different SSD drives, you will
not ever hit near gigabit speeds on the router LAN interface.

Maybe with SSD's you could hit near max, but I don't have
2 SSD drives in my computer to test it out.

I've done numerous test over gigabit between
Sata2/Sata3 7200RPM drives and could never get near max
(I couldn't even reach 1/2 gigabit speeds)
transfer speeds as the drives were the bottleneck.

Re: Router Speed tests

Posted: Tue Sep 01, 2015 5:17 am
by ispyisail
I'm not an expert but I purchased the server version of "LAN speed test" which from my understanding uses RAM

LST Server is an additional feature for Lan Speed Test. By using this configuration the client talks directly to the server through the network with no hard drive limitations. This gives more accurate results of True network performance on the client screen. LST Server also makes it possible to test your WAN (internet) connection!


http://www.totusoft.com/lanspeedserver.html

Re: Router Speed tests

Posted: Thu Sep 24, 2015 12:43 pm
by francisuk1989
TP-LINK TL-WDR3600 v.1.5, Gargoyle 1.8.0

LAN to WAN, all ports been used but just the Xbox One and my PC rest are idle/Turned off but shows a green light. 4 android device again not been used.
Also has QoS both Download and Upload.

53 Mb download
3 Mb upload

^^^ This is my ISP max speed i can grab from the ISP yet until the 100Mb upgrade thats coming.

Sorry i couldnt be more helpful but will do more as a project for Sunday :lol:

Re: Router Speed tests

Posted: Tue Sep 29, 2015 2:12 pm
by jayt
What do you think of this software?

NetIQ Qcheck
http://www.practicallynetworked.com/sup ... -Frame.htm

Re: Router Speed tests

Posted: Wed Sep 30, 2015 4:27 am
by ispyisail
Thanks for the tip

Re: Router Speed tests

Posted: Sun Dec 06, 2015 8:08 pm
by ericwong
This is tested using Vodafone Fibre connection via speedtest.

TP-Link TL-WR1043N/ND v2 (Gargoyle 1.8.1), Quota and QoS disabled
Ethernet - 9/12/2015 9:06 AM AEST 78.09 Mb/s 47.83 Mb/s 4 ms Auckland < 50 km
300Mbps WiFi - 11/26/2015 11:45 AM AEDT 48.59 Mb/s 42.89 Mb/s 4 ms Auckland < 50 km

I don't know the connect speed provisioned for this Fibre connection because this is still under the early Fibre trial connection. I assume the max download speed is 100M but I never achieved it, don't know why. The 50M upload speed is non-existent in any of the Fibre plans advertised, so I have no idea why I can get such results.
-------------------
This is tested using Optus 100M/2M Cable connection via speedtest.

TP-Link TL-WR1043N/ND v1 (Gargoyle 1.8.1), Quota and QoS disabled
Ethernet - 11/12/2015 3:20 PM AEDT 77.62 Mb/s 1.58 Mb/s 8 ms Melbourne < 50 km
------------------
My own observation indicates I am unable to exceed 80M download using TP-Link TL-WR1043N/ND v2 or v1 even though the connections I used for testing are rated at 100M.

Max WiFi throughput of TP-Link TL-WR1043N/ND v2 or v1 seems to be around 50M even when 300Mbps WiFi is used.

Having said that, previously someone did sent me screenshots of speedtest privately showing that they were able to achieve 114Mbps download with ethernet, 76Mbps download with WiFi using TP-Link TL-WR1043N/ND v2 running Gargoyle 1.7.2 on their Telstra 100M/2M connection. I have never hit such high speed before myself though.

Would be interested to see speedtest from others using 100M or higher connection using Gargoyle router.

Re: Router Speed tests

Posted: Thu Dec 10, 2015 5:37 am
by CaptainKansloos
Tested with Gargoyle 1.9.0 on an Netgear WNDR3700v2 on a clean install.

I used en Core i5 with an SSD behind the Netgear. Netgear with WAN adapter connected as a 'slave device' to another Gbit router. On this Gbit router, my Zyxel NAS is connected with a single Gbit port.

Usually, I get around 65-80 MB/s read and 55-65MB/s write speeds on the NAS, from any given Gbit connected computer. Figured that this should be fast enough to saturate a non HW-accellerated (as any OpenWRT based device) WAN adapter on my Netgear router. Did an FTP up- and download test in the given setup, these were my results:

Download ~19000kBps
~160 Mbps

Upload: ~23500kBps
~198 Mbps

Funny enough, upload speeds (LAN-WAN) are higher than download speeds (WAN-LAN). Although I really like Gargoyle for all it's features (especially OpenVPN support) and stability, on this hardware it can barely keep up with my internet connection speed (Fiber, 200Mbit symmetrical).

Any suggestions on a new router with decent OpenVPN support (Android phones, Windows laptops)? Asus RT-AC68U or Netgear R7000 are on the shortlist, but I read mixed reviews on both of them, especially on stability.

Alternatives are welcome, even Gargoyle based.