WR841nd v9.0

Report problems and success stories with Gargoyle on various hardware platforms.

Moderator: Moderators

Post Reply
ddoimo1992
Posts: 1
Joined: Mon Jul 13, 2015 9:27 pm

WR841nd v9.0

Post by ddoimo1992 »

Hello,

I tried to search in the forum for an answer about the WR841nd v9 compatibility, has anyone get success flashing the file gargoyle_1.7.1-ar71xx-generic-tl-wr841n-v9-squashfs-factory.bin on this model?

The WR841nd v9 have the Atheros QCA9533 and the file is for AR71xx, can i flash it anyway?

Thanks!!!

pepsi82
Posts: 12
Joined: Mon Apr 13, 2015 6:13 am

Re: WR841nd v9.0

Post by pepsi82 »

today i have upgrade from 1.7.1 with this file

gargoyle_1.7.2-ar71xx-generic-tl-wr841n-v9-squashfs-factory.bin

all OK

bye

pepsi82
Posts: 12
Joined: Mon Apr 13, 2015 6:13 am

Re: WR841nd v9.0

Post by pepsi82 »

anyone upgrade to 1.8.0 ???

JasonB11
Posts: 15
Joined: Thu Sep 03, 2015 7:21 pm

Re: WR841nd v9.0

Post by JasonB11 »

I have and I am having issues with changing settings after the initial installation is complete. After making changes to (example: change SSID name | change reboot times) the settings look like they have changed. But when refreshing the browser the settings revert back to what was originally entered.

If anyone has any suggestions how to fix this I would be very grateful. Also, I am having issues with the software becoming "undefined" with all settings after a backup/restore. Any help with this would be greatly appreciated too.

tp link- 841nd v 9.2

nworbnhoj
Posts: 914
Joined: Mon Jul 21, 2014 10:08 am
Location: Australia
Contact:

Re: WR841nd v9.0

Post by nworbnhoj »

JasonB11 wrote:I have and I am having issues with changing settings after the initial installation is complete. After making changes to (example: change SSID name | change reboot times) the settings look like they have changed. But when refreshing the browser the settings revert back to what was originally entered. Also, I am having issues with the software becoming "undefined" with all settings after a backup/restore. tp link- 841nd v 9.2
Just guessing - but to me this looks like the bare min Flash/RAM in the WR841 is struggling with Gargoyle v8.0. or you got a bad Flash. If it were mine I would checksum the Gargoyle image (or redownload) and reflash. If still no luck I would go back to gargoyle 1.6.2.
Can you help someone else get Gargoyle up and running?
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E

JasonB11
Posts: 15
Joined: Thu Sep 03, 2015 7:21 pm

Re: WR841nd v9.0

Post by JasonB11 »

nworbnhoj wrote: Just guessing - but to me this looks like the bare min Flash/RAM in the WR841 is struggling with Gargoyle v8.0. or you got a bad Flash. If it were mine I would checksum the Gargoyle image (or redownload) and reflash. If still no luck I would go back to gargoyle 1.6.2.
I think that was probably the issue. I just reflashed the device and started fresh. I am not going to download anything extra onto the router. Just the basic settings and that's it.

pepsi82
Posts: 12
Joined: Mon Apr 13, 2015 6:13 am

Re: WR841nd v9.0

Post by pepsi82 »

flash 1.8 on wr841nd v9

ALL OK
ALL WORK

Post Reply