Asus RT-N12-D1 firmware installation fail

Report problems and success stories with Gargoyle on various hardware platforms.

Moderator: Moderators

brettybaby
Posts: 1
Joined: Sat Sep 06, 2014 1:37 pm

Asus RT-N12-D1 firmware installation fail

Postby brettybaby » Sat Sep 06, 2014 1:49 pm

I tried the stable realease for the Asus rt-n12 d1 router
It has the broadcom arch in it which I used.

I downloaded the latest stable realease below

gargoyle_1.6.2-brcm47xx-squashfs.trx

Does anyone know if gargoyle can be used on the asus rt-n12 router?

After I installed the router, It failed to send DCHP or SSID broadcasts so I cold not login to change the settings.

I did use DD-WRT on it and it works fine with that. Does gargoyle have the function to turn up the tx antenna power like dd-wrt?

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: Asus RT-N12-D1 firmware installation fail

Postby DoesItMatter » Sun Sep 07, 2014 4:00 pm

http://wiki.openwrt.org/toh/asus/rt-n12d1

Not supported with Gargoyle yet

Gargoyle is based on OpenWRT

OpenWRT has support for the RT-N12-D1 on the TRUNK version

Trunk is compile-yourself versions - work in progress

Will be a while before Gargoyle supports the RT-N12-D1
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

joyo
Posts: 1
Joined: Thu Sep 18, 2014 6:02 am

Re: Asus RT-N12-D1 firmware installation fail

Postby joyo » Thu Sep 18, 2014 6:09 am

so in this blog is very nice post
Great information to in this post
for more information see:ESO Gold and TESO Gold at http://www.esosale.com/


Return to “Hardware / Installation Issues”

Who is online

Users browsing this forum: No registered users and 1 guest