Gargoyle on D-Link DIR-300

Report problems and success stories with Gargoyle on various hardware platforms.

Moderator: Moderators

ispyisail
Moderator
Posts: 5185
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Gargoyle on D-Link DIR-300

Post by ispyisail »

fis list
fis list.jpg
fis list.jpg (104.64 KiB) Viewed 23034 times

ispyisail
Moderator
Posts: 5185
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Gargoyle on D-Link DIR-300

Post by ispyisail »

fis list all.jpg
fis list all.jpg (120.5 KiB) Viewed 23032 times

Eric
Site Admin
Posts: 1443
Joined: Sat Jun 14, 2008 1:14 pm

Re: Gargoyle on D-Link DIR-300

Post by Eric »

Alright, let's try this again.... No guarantees since I don't own a DIR300, but the new version works with my current routers and detects flash addresses and flash size dynamically.

Since I'd like to confirm with you that it works before making it the official download, I've posted the new version separately here. (Use this and not the download in the download section)

Please let me know if it works, and if it doesn't it would help if in addition to letting me know what error messages are printed out you could run the fis list command again so I can see what's going on. Thanks!

ispyisail
Moderator
Posts: 5185
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Gargoyle on D-Link DIR-300

Post by ispyisail »

can confirm new version loads with windows xp with out c++ installed

ispyisail
Moderator
Posts: 5185
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Gargoyle on D-Link DIR-300

Post by ispyisail »

Fon Flash / D-link router get into a locked state
fon flash d-link1.jpg
fon flash d-link1.jpg (123.16 KiB) Viewed 23012 times
hang on its still working, ill send this post anyway

ispyisail
Moderator
Posts: 5185
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Gargoyle on D-Link DIR-300

Post by ispyisail »

I'm jumping up and down with excitement

IT WORKED
fon flash d-link2.jpg
fon flash d-link2.jpg (190.82 KiB) Viewed 23009 times
I need to test the router now and see if i can get that to work

Did i tell you i was jumping up and down :D

ispyisail
Moderator
Posts: 5185
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Gargoyle on D-Link DIR-300

Post by ispyisail »

I'm having trouble getting the config web page
fon flash d-link10.png
fon flash d-link10.png (89.13 KiB) Viewed 22995 times
I can't find a broadcast SSID

My PC is pulling a IP address form port 1 on the router but i can't connect to 192.168.1.10

I notice when the router finishes booting there is no command prompt?

I'm going to try gargoyle beta instead of bleeding edge!

Eric
Site Admin
Posts: 1443
Joined: Sat Jun 14, 2008 1:14 pm

Re: Gargoyle on D-Link DIR-300

Post by Eric »

The router comes up on IP 192.168.1.1, not 192.168.1.10.

There's no SSID because the wireless is inactive by default until you configure it.

ispyisail
Moderator
Posts: 5185
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Gargoyle on D-Link DIR-300

Post by ispyisail »

duhh

sorry i got 192.168.1.10 <-> 192.168.1.1 arouind the wrong way

I've reflashed using windows xp with no c++ to beta version 4
I notice when the router finishes booting there is no command prompt?
I needed to hit enter

192.168.1.1 works .

just finding user name and password

ispyisail
Moderator
Posts: 5185
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Gargoyle on D-Link DIR-300

Post by ispyisail »

Im in
gargoyle.png
gargoyle.png (214.24 KiB) Viewed 22988 times

Post Reply