Сan't upgrade TP-Link TL-WR1043ND Ver 1.8

Report problems and success stories with Gargoyle on various hardware platforms.

Moderator: Moderators

Post Reply
sp_archer
Posts: 8
Joined: Thu Jun 20, 2013 10:44 am

Сan't upgrade TP-Link TL-WR1043ND Ver 1.8

Post by sp_archer »

I use my WR1043ND Ver 1.8 with Gargoyle Version:1.5.9.
It was flashed from gargoyle_1.5.9-ar71xx-generic-tl-wr1043nd-v1-squashfs-factory.bin
and works without any problem.

Now I want update to 1.5.10.
I take gargoyle_1.5.10-ar71xx-generic-tl-wr1043nd-v1-squashfs-sysupgrade.bin
chose it on Upgrade Firmware Tab,
chose "Attempt to Preserve Settings"
press "Upgrade Now" button...

And Nothing Happens

I see message "Uploading Firmware"
wait about 15 minutes, then just turn off router

Thanx God, when I turn on router it start normally with old Gargoyle Version:1.5.9.

I take a chance and repeat it ones more without "Attempt to Preserve Settings"
Result is the same.

What's wrong?

Thanks in advance.

sp_archer
Posts: 8
Joined: Thu Jun 20, 2013 10:44 am

Re: Сan't upgrade TP-Link TL-WR1043ND Ver 1.8

Post by sp_archer »

It's fantastic!

Just now try ones more.
End everything OK. :shock:
Now my Gargoyle Version = 1.5.10
:o :?

e2000
Posts: 2
Joined: Fri Aug 02, 2013 3:33 am

Re: Сan't upgrade TP-Link TL-WR1043ND Ver 1.8

Post by e2000 »

is your v1.8 s/n 12xxxxx series? if so did you upgrade straight to gargoyle or did you downgrade to german firmware first?

Post Reply