Adblock plugin installed but it doesn't appear

Report problems and success stories with Gargoyle on various hardware platforms.

Moderator: Moderators

Post Reply
willian
Posts: 14
Joined: Wed Mar 06, 2019 8:19 am

Adblock plugin installed but it doesn't appear

Post by willian »

Hey, guys,

I upgraded my TL-WR1043NDv1 from 1.10.x Final to 1.12.x Final, everything ran smoothly until I install the Adblock plugin.

The Plugins tab shows that it is installed but does not appear in Connection or Firewall (I don't remember where it configures the service). I installed the logread and webshell plugins, which I normally use and both work normally.

I appreciate any help. Thanks.
TL-WR1043ND v1 | 1.12.X (Built 20200610-0028 git@80899c80)
Top
ispyisail
Moderator
Posts: 5185
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Adblock plugin installed but it doesn't appear

Post by ispyisail »

From memory those routers are running out of capacity.

RAM / Flash / CPU

Add block installs fine on my C7

also i'm not sure how effective the adblock is these days?

Image
Top
Lantis
Moderator
Posts: 6753
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Adblock plugin installed but it doesn't appear

Post by Lantis »

Try reinstalling it.
You can also try manually visiting http://192.168.1.1/ablock.sh
If that works, it just means the script to add it to the menu didn't run properly
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Top
willian
Posts: 14
Joined: Wed Mar 06, 2019 8:19 am

Re: Adblock plugin installed but it doesn't appear

Post by willian »

ispyisail wrote: ↑
Wed Sep 02, 2020 2:39 pm
 From memory those routers are running out of capacity.

RAM / Flash / CPU

Add block installs fine on my C7

also i'm not sure how effective the adblock is these days?

Image
I don't believe it is a problem of space or memory, when a plugin cannot be installed a warning appears "Package Cannot Be Installed (Insufficient Disk Space)".
Lantis wrote: ↑
Wed Sep 02, 2020 5:45 pm
 Try reinstalling it.
You can also try manually visiting http://192.168.1.1/ablock.sh
If that works, it just means the script to add it to the menu didn't run properly
I tried to access the direct link but it redirects to the home page. So I uninstalled and when I tried to install again the following appeared in the log:

Code: Select all

Wed Sep  2 20:38:15 2020 kern.info kernel: [22093.504343] do_page_fault(): sending SIGSEGV to gpkg for invalid read access from 00000000
Wed Sep  2 20:38:15 2020 kern.info kernel: [22093.512789] epc = 77448519 in libericstools.so.1[77446000+14000]
Wed Sep  2 20:38:15 2020 kern.info kernel: [22093.518895] ra  = 774485d3 in libericstools.so.1[77446000+14000]
Wed Sep  2 20:38:15 2020 daemon.err uhttpd[1582]: WARNING: opkg file "/var/opkg-lists/openwrt_18.06-SNAPSHOT_telephony" does not exist or can not be opened
Wed Sep  2 20:38:15 2020 daemon.err uhttpd[1582]: No packages to install.
Wed Sep  2 20:38:15 2020 daemon.err uhttpd[1582]:
Wed Sep  2 20:38:15 2020 daemon.err uhttpd[1582]: Segmentation fault
TL-WR1043ND v1 | 1.12.X (Built 20200610-0028 git@80899c80)
Top
Lantis
Moderator
Posts: 6753
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Adblock plugin installed but it doesn't appear

Post by Lantis »

That looks like an out of memory (RAM, not flash) type situation.
You can try minimising the number of lists it loads by commenting out (#) the openwrt related lines in /etc/opkg.conf

e.g. from

Code: Select all

src/gz openwrt_19.07.3_base http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/base
src/gz openwrt_19.07.3_packages http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/packages
src/gz openwrt_19.07.3_routing http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/routing
src/gz openwrt_19.07.3_telephony http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/telephony

src/gz gargoyle http://www.gargoyle-router.com/packages/gargoyle-1.14/ipq806x/default
src/gz gargoyle_kernel_specific http://www.gargoyle-router.com/packages/gargoyle-1.14/ipq806x/default_kernelspecific

dest root /
dest ram /tmp
dest plugin_root /plugin_root
lists_dir ext /var/opkg-lists
option overlay_root /overlay
to

Code: Select all

#src/gz openwrt_19.07.3_base http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/base
#src/gz openwrt_19.07.3_packages http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/packages
#src/gz openwrt_19.07.3_routing http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/routing
#src/gz openwrt_19.07.3_telephony http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/telephony

src/gz gargoyle http://www.gargoyle-router.com/packages/gargoyle-1.14/ipq806x/default
src/gz gargoyle_kernel_specific http://www.gargoyle-router.com/packages/gargoyle-1.14/ipq806x/default_kernelspecific

dest root /
dest ram /tmp
dest plugin_root /plugin_root
lists_dir ext /var/opkg-lists
option overlay_root /overlay
NOTE: Don't just copy mine as it will be for a different device and different version

You should then reboot to clear out RAM.
If that doesn't work can you provide a more complete log please? What you gave was good, but a bit more context before/after the error often helps as well. 50-100 lines either side is usually ok.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Top
ispyisail
Moderator
Posts: 5185
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Adblock plugin installed but it doesn't appear

Post by ispyisail »

you could also try SWAP

https://www.gargoyle-router.com/wiki/do ... sb_storage

The router is really at end of life
Top
willian
Posts: 14
Joined: Wed Mar 06, 2019 8:19 am

Re: Adblock plugin installed but it doesn't appear

Post by willian »

Lantis wrote: ↑
Wed Sep 02, 2020 10:12 pm
 That looks like an out of memory (RAM, not flash) type situation.
You can try minimising the number of lists it loads by commenting out (#) the openwrt related lines in /etc/opkg.conf

e.g. from

Code: Select all

src/gz openwrt_19.07.3_base http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/base
src/gz openwrt_19.07.3_packages http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/packages
src/gz openwrt_19.07.3_routing http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/routing
src/gz openwrt_19.07.3_telephony http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/telephony

src/gz gargoyle http://www.gargoyle-router.com/packages/gargoyle-1.14/ipq806x/default
src/gz gargoyle_kernel_specific http://www.gargoyle-router.com/packages/gargoyle-1.14/ipq806x/default_kernelspecific

dest root /
dest ram /tmp
dest plugin_root /plugin_root
lists_dir ext /var/opkg-lists
option overlay_root /overlay
to

Code: Select all

#src/gz openwrt_19.07.3_base http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/base
#src/gz openwrt_19.07.3_packages http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/packages
#src/gz openwrt_19.07.3_routing http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/routing
#src/gz openwrt_19.07.3_telephony http://downloads.openwrt.org/releases/19.07.3/packages/arm_cortex-a15_neon-vfpv4/telephony

src/gz gargoyle http://www.gargoyle-router.com/packages/gargoyle-1.14/ipq806x/default
src/gz gargoyle_kernel_specific http://www.gargoyle-router.com/packages/gargoyle-1.14/ipq806x/default_kernelspecific

dest root /
dest ram /tmp
dest plugin_root /plugin_root
lists_dir ext /var/opkg-lists
option overlay_root /overlay
NOTE: Don't just copy mine as it will be for a different device and different version

You should then reboot to clear out RAM.
If that doesn't work can you provide a more complete log please? What you gave was good, but a bit more context before/after the error often helps as well. 50-100 lines either side is usually ok.
I commented out the lines and reboot, tried to install again and it worked!
Thank you very much, Lantis.
Here is the log right after the reboot, before I try to install:

Code: Select all

Thu Sep  3 10:13:00 2020 kern.notice kernel: [    0.000000] Linux version 4.9.223 (user@svr18) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r6907+1109-7e15e21766) ) #0 Tue May 12 10:45:57 2020
Thu Sep  3 10:13:00 2020 kern.debug kernel: [    0.000000] MyLoader: sysp=aaaaaaa2, boardp=a2b2aaaa, parts=aaaaaaaa
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.000000] bootconsole [early0] enabled
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.000000] SoC: Atheros AR9132 rev 2
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.000000] Determined physical RAM map:
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.000000]  memory: 02000000 @ 00000000 (usable)
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.000000] Initrd not found or empty - disabling initrd
Thu Sep  3 10:13:00 2020 kern.warn kernel: [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Thu Sep  3 10:13:00 2020 kern.warn kernel: [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.000000] Zone ranges:
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.000000]   Normal   [mem 0x0000000000000000-0x0000000001ffffff]
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.000000] Movable zone start for each node
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.000000] Early memory node ranges
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.000000]   node   0: [mem 0x0000000000000000-0x0000000001ffffff]
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff]
Thu Sep  3 10:13:00 2020 kern.debug kernel: [    0.000000] On node 0 totalpages: 8192
Thu Sep  3 10:13:00 2020 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat 8047c7c4, node_mem_map 81000020
Thu Sep  3 10:13:00 2020 kern.debug kernel: [    0.000000]   Normal zone: 64 pages used for memmap
Thu Sep  3 10:13:00 2020 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Thu Sep  3 10:13:00 2020 kern.debug kernel: [    0.000000]   Normal zone: 8192 pages, LIFO batch:0
Thu Sep  3 10:13:00 2020 kern.debug kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Thu Sep  3 10:13:00 2020 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Thu Sep  3 10:13:00 2020 kern.notice kernel: [    0.000000] Kernel command line: board=TL-WR1043ND  console=ttyS0,115200 rootfstype=squashfs noinitrd
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.000000] Writing ErrCtl register=00000000
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.000000] Readback ErrCtl register=00000000
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.000000] Memory: 27288K/32768K available (3236K kernel code, 167K rwdata, 808K rodata, 324K init, 205K bss, 5480K reserved, 0K cma-reserved)
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.000000] NR_IRQS:51
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:40.000MHz
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.000013] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.007902] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.090609] pid_max: default: 32768 minimum: 301
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.095359] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.101963] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.112474] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.122309] futex hash table entries: 256 (order: -1, 3072 bytes)
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.129113] NET: Registered protocol family 16
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.135396] MIPS: machine is TP-LINK TL-WR1043ND
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.444540] clocksource: Switched to clocksource MIPS
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.450949] NET: Registered protocol family 2
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.456485] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.463460] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.469866] TCP: Hash tables configured (established 1024 bind 1024)
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.476366] UDP hash table entries: 256 (order: 0, 4096 bytes)
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.482210] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.488789] NET: Registered protocol family 1
Thu Sep  3 10:13:00 2020 kern.debug kernel: [    0.493172] PCI: CLS 0 bytes, default 32
Thu Sep  3 10:13:00 2020 kern.warn kernel: [    0.498721] Crashlog allocated RAM at address 0x1f00000
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.505335] workingset: timestamp_bits=30 max_order=13 bucket_order=0
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.521161] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.527016] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.547544] io scheduler noop registered
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.551467] io scheduler deadline registered (default)
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.557120] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.563980] console [ttyS0] disabled
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.587601] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 12500000) is a 16550A
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.596308] console [ttyS0] enabled
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.603317] bootconsole [early0] disabled
Thu Sep  3 10:13:00 2020 kern.warn kernel: [    0.615838] m25p80 spi0.0: found s25fl064k, expected m25p80
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.633582] m25p80 spi0.0: s25fl064k (8192 Kbytes)
Thu Sep  3 10:13:00 2020 kern.notice kernel: [    0.638761] 5 tp-link partitions found on MTD device spi0.0
Thu Sep  3 10:13:00 2020 kern.notice kernel: [    0.644362] Creating 5 MTD partitions on "spi0.0":
Thu Sep  3 10:13:00 2020 kern.notice kernel: [    0.649229] 0x000000000000-0x000000020000 : "u-boot"
Thu Sep  3 10:13:00 2020 kern.notice kernel: [    0.656713] 0x000000020000-0x00000017cf58 : "kernel"
Thu Sep  3 10:13:00 2020 kern.notice kernel: [    0.664274] 0x00000017cf58-0x0000007f0000 : "rootfs"
Thu Sep  3 10:13:00 2020 kern.notice kernel: [    0.671323] mtd: device 2 (rootfs) set to be root filesystem
Thu Sep  3 10:13:00 2020 kern.notice kernel: [    0.677136] 1 squashfs-split partitions found on MTD device rootfs
Thu Sep  3 10:13:00 2020 kern.notice kernel: [    0.683368] 0x000000700000-0x0000007f0000 : "rootfs_data"
Thu Sep  3 10:13:00 2020 kern.notice kernel: [    0.691464] 0x0000007f0000-0x000000800000 : "art"
Thu Sep  3 10:13:00 2020 kern.notice kernel: [    0.698807] 0x000000020000-0x0000007f0000 : "firmware"
Thu Sep  3 10:13:00 2020 kern.notice kernel: [    0.707093] Realtek RTL8366RB ethernet switch driver version 0.2.4
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.824568] rtl8366rb rtl8366rb: using GPIO pins 18 (SDA) and 19 (SCK)
Thu Sep  3 10:13:00 2020 kern.info kernel: [    0.831318] rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found
Thu Sep  3 10:13:00 2020 kern.info kernel: [    1.075439] libphy: rtl8366rb: probed
Thu Sep  3 10:13:00 2020 kern.info kernel: [    1.079971] libphy: Fixed MDIO Bus: probed
Thu Sep  3 10:13:00 2020 kern.info kernel: [    1.426601] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
Thu Sep  3 10:13:00 2020 kern.info kernel: [    1.434984] NET: Registered protocol family 10
Thu Sep  3 10:13:00 2020 kern.info kernel: [    1.443751] NET: Registered protocol family 17
Thu Sep  3 10:13:00 2020 kern.info kernel: [    1.448373] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Thu Sep  3 10:13:00 2020 kern.info kernel: [    1.461535] 8021q: 802.1Q VLAN Support v1.8
Thu Sep  3 10:13:00 2020 kern.info kernel: [    1.472554] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Thu Sep  3 10:13:00 2020 kern.info kernel: [    1.481691] Freeing unused kernel memory: 324K
Thu Sep  3 10:13:00 2020 kern.warn kernel: [    1.486202] This architecture does not have kernel memory protection.
Thu Sep  3 10:13:00 2020 user.info kernel: [    2.449134] init: Console is alive
Thu Sep  3 10:13:00 2020 user.info kernel: [    2.452803] init: - watchdog -
Thu Sep  3 10:13:00 2020 kern.notice kernel: [    2.564551] random: fast init done
Thu Sep  3 10:13:00 2020 user.info kernel: [    5.886539] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Thu Sep  3 10:13:00 2020 kern.info kernel: [    6.148107] usbcore: registered new interface driver usbfs
Thu Sep  3 10:13:00 2020 kern.info kernel: [    6.153730] usbcore: registered new interface driver hub
Thu Sep  3 10:13:00 2020 kern.info kernel: [    6.159267] usbcore: registered new device driver usb
Thu Sep  3 10:13:00 2020 kern.info kernel: [    6.206826] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Thu Sep  3 10:13:00 2020 kern.notice kernel: [    6.224826] SCSI subsystem initialized
Thu Sep  3 10:13:00 2020 kern.info kernel: [    6.235395] ehci-platform: EHCI generic platform driver
Thu Sep  3 10:13:00 2020 kern.info kernel: [    6.240777] ehci-platform ehci-platform: EHCI Host Controller
Thu Sep  3 10:13:00 2020 kern.info kernel: [    6.246634] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Thu Sep  3 10:13:00 2020 kern.info kernel: [    6.254760] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Thu Sep  3 10:13:00 2020 kern.info kernel: [    6.284595] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Thu Sep  3 10:13:00 2020 kern.info kernel: [    6.292121] hub 1-0:1.0: USB hub found
Thu Sep  3 10:13:00 2020 kern.info kernel: [    6.296344] hub 1-0:1.0: 1 port detected
Thu Sep  3 10:13:00 2020 kern.info kernel: [    6.304470] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Thu Sep  3 10:13:00 2020 kern.info kernel: [    6.312908] ohci-platform: OHCI generic platform driver
Thu Sep  3 10:13:00 2020 kern.info kernel: [    6.336997] usbcore: registered new interface driver usb-storage
Thu Sep  3 10:13:00 2020 kern.info kernel: [    6.346855] usbcore: registered new interface driver uas
Thu Sep  3 10:13:00 2020 user.info kernel: [    6.352877] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Thu Sep  3 10:13:00 2020 user.info kernel: [    6.370701] init: - preinit -
Thu Sep  3 10:13:00 2020 kern.debug kernel: [    7.455479] ar71xx: pll_reg 0xb8050014: 0x1a000000
Thu Sep  3 10:13:00 2020 kern.info kernel: [    7.455501] eth0: link up (1000Mbps/Full duplex)
Thu Sep  3 10:13:00 2020 kern.notice kernel: [    7.504868] random: procd: uninitialized urandom read (4 bytes read)
Thu Sep  3 10:13:00 2020 user.info kernel: [   10.868816] mount_root: loading kmods from internal overlay
Thu Sep  3 10:13:00 2020 user.info kernel: [   11.003642] kmodloader: loading kernel modules from //etc/modules-boot.d/*
Thu Sep  3 10:13:00 2020 user.info kernel: [   11.013683] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
Thu Sep  3 10:13:00 2020 kern.notice kernel: [   11.813011] jffs2: notice: (426) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Thu Sep  3 10:13:00 2020 user.info kernel: [   11.829162] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Thu Sep  3 10:13:00 2020 user.info kernel: [   11.841377] block: extroot: not configured
Thu Sep  3 10:13:00 2020 kern.notice kernel: [   11.890714] jffs2: notice: (424) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Thu Sep  3 10:13:00 2020 user.info kernel: [   12.150503] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Thu Sep  3 10:13:00 2020 user.info kernel: [   12.162647] block: extroot: not configured
Thu Sep  3 10:13:00 2020 user.info kernel: [   12.168159] mount_root: switching to jffs2 overlay
Thu Sep  3 10:13:00 2020 user.warn kernel: [   12.312189] urandom-seed: Seeding with /etc/urandom.seed
Thu Sep  3 10:13:00 2020 kern.info kernel: [   12.467462] eth0: link down
Thu Sep  3 10:13:00 2020 user.info kernel: [   12.484071] procd: - early -
Thu Sep  3 10:13:00 2020 user.info kernel: [   12.488432] procd: - watchdog -
Thu Sep  3 10:13:00 2020 user.info kernel: [   13.249054] procd: - watchdog -
Thu Sep  3 10:13:00 2020 user.info kernel: [   13.252499] procd: - ubus -
Thu Sep  3 10:13:00 2020 kern.notice kernel: [   13.696174] random: jshn: uninitialized urandom read (4 bytes read)
Thu Sep  3 10:13:00 2020 kern.notice kernel: [   13.703663] random: ubusd: uninitialized urandom read (4 bytes read)
Thu Sep  3 10:13:00 2020 kern.notice kernel: [   13.796564] random: ubusd: uninitialized urandom read (4 bytes read)
Thu Sep  3 10:13:00 2020 user.info kernel: [   13.804723] procd: - init -
Thu Sep  3 10:13:00 2020 user.info kernel: [   15.557301] kmodloader: loading kernel modules from /etc/modules.d/*
Thu Sep  3 10:13:00 2020 kern.info kernel: [   15.717689] RPC: Registered named UNIX socket transport module.
Thu Sep  3 10:13:00 2020 kern.info kernel: [   15.723649] RPC: Registered udp transport module.
Thu Sep  3 10:13:00 2020 kern.info kernel: [   15.728450] RPC: Registered tcp transport module.
Thu Sep  3 10:13:00 2020 kern.info kernel: [   15.733180] RPC: Registered tcp NFSv4.1 backchannel transport module.
Thu Sep  3 10:13:00 2020 kern.info kernel: [   15.759398] tun: Universal TUN/TAP device driver, 1.6
Thu Sep  3 10:13:00 2020 kern.info kernel: [   15.764486] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Thu Sep  3 10:13:00 2020 kern.info kernel: [   15.789752] gre: GRE over IPv4 demultiplexor driver
Thu Sep  3 10:13:00 2020 kern.info kernel: [   15.797779] ip_gre: GRE over IPv4 tunneling driver
Thu Sep  3 10:13:00 2020 kern.info kernel: [   15.887598] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Thu Sep  3 10:13:00 2020 kern.info kernel: [   15.958199] ip6_tables: (C) 2000-2006 Netfilter Core Team
Thu Sep  3 10:13:00 2020 kern.info kernel: [   16.057266] Netfilter messages via NETLINK v0.30.
Thu Sep  3 10:13:00 2020 kern.info kernel: [   16.072963] ip_set: protocol 6
Thu Sep  3 10:13:00 2020 kern.info kernel: [   16.247198] u32 classifier
Thu Sep  3 10:13:00 2020 kern.info kernel: [   16.249935]     input device check on
Thu Sep  3 10:13:00 2020 kern.info kernel: [   16.253613]     Actions configured
Thu Sep  3 10:13:00 2020 kern.info kernel: [   16.284126] Mirror/redirect action on
Thu Sep  3 10:13:00 2020 kern.info kernel: [   16.382632] fuse init (API version 7.26)
Thu Sep  3 10:13:00 2020 kern.notice kernel: [   16.418350] Bridge firewalling registered
Thu Sep  3 10:13:00 2020 kern.info kernel: [   16.448997] usbcore: registered new interface driver cdc_acm
Thu Sep  3 10:13:00 2020 kern.info kernel: [   16.454769] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Thu Sep  3 10:13:00 2020 kern.info kernel: [   16.512499] usbcore: registered new interface driver cdc_wdm
Thu Sep  3 10:13:00 2020 kern.info kernel: [   16.536508] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
Thu Sep  3 10:13:00 2020 kern.info kernel: [   16.544612] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
Thu Sep  3 10:13:00 2020 kern.info kernel: [   16.610283] Ebtables v2.0 registered
Thu Sep  3 10:13:00 2020 kern.info kernel: [   16.619476] ip_tables: (C) 2000-2006 Netfilter Core Team
Thu Sep  3 10:13:00 2020 kern.info kernel: [   16.656265] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
Thu Sep  3 10:13:00 2020 kern.info kernel: [   16.801380] ctnetlink v0.93: registering with nfnetlink.
Thu Sep  3 10:13:00 2020 kern.info kernel: [   16.991281] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.058459] usbcore: registered new interface driver ums-alauda
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.069603] usbcore: registered new interface driver ums-cypress
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.080942] usbcore: registered new interface driver ums-datafab
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.091757] usbcore: registered new interface driver ums-freecom
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.102914] usbcore: registered new interface driver ums-isd200
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.114424] usbcore: registered new interface driver ums-jumpshot
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.125448] usbcore: registered new interface driver ums-karma
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.138156] usbcore: registered new interface driver ums-sddr09
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.149333] usbcore: registered new interface driver ums-sddr55
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.161291] usbcore: registered new interface driver ums-usbat
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.173782] usbcore: registered new interface driver usblp
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.211050] usbcore: registered new interface driver usbserial
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.217105] usbcore: registered new interface driver usbserial_generic
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.223787] usbserial: USB Serial support registered for generic
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.313102] xt_time: kernel timezone is -0000
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.323542] usbcore: registered new interface driver cdc_ether
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.338999] usbcore: registered new interface driver cdc_ncm
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.416934] usbcore: registered new interface driver huawei_cdc_ncm
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.522688] PPP generic driver version 2.4.2
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.531644] PPP MPPE Compression module registered
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.539769] NET: Registered protocol family 24
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.547103] PPTP driver version 0.8.5
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.557186] usbcore: registered new interface driver qmi_wwan
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.570119] usbcore: registered new interface driver rndis_host
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.582642] usbcore: registered new interface driver sierra
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.588474] usbserial: USB Serial support registered for Sierra USB modem
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.600643] usbcore: registered new interface driver sierra_net
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.706028] usbcore: registered new interface driver cdc_mbim
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.715845] usbcore: registered new interface driver option
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.721583] usbserial: USB Serial support registered for GSM modem (1-port)
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.736927] usbcore: registered new interface driver qcserial
Thu Sep  3 10:13:00 2020 kern.info kernel: [   17.742821] usbserial: USB Serial support registered for Qualcomm USB modem
Thu Sep  3 10:13:00 2020 kern.debug kernel: [   17.909930] ath: EEPROM regdomain: 0x0
Thu Sep  3 10:13:01 2020 kern.debug kernel: [   17.909942] ath: EEPROM indicates default country code should be used
Thu Sep  3 10:13:01 2020 kern.debug kernel: [   17.909947] ath: doing EEPROM country->regdmn map search
Thu Sep  3 10:13:01 2020 kern.debug kernel: [   17.909963] ath: country maps to regdmn code: 0x3a
Thu Sep  3 10:13:01 2020 kern.debug kernel: [   17.909970] ath: Country alpha2 being used: US
Thu Sep  3 10:13:01 2020 kern.debug kernel: [   17.909976] ath: Regpair used: 0x3a
Thu Sep  3 10:13:01 2020 kern.debug kernel: [   17.951630] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Thu Sep  3 10:13:01 2020 kern.info kernel: [   18.142988] ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2
Thu Sep  3 10:13:01 2020 user.info kernel: [   18.154055] kmodloader: done loading kernel modules from /etc/modules.d/*
Thu Sep  3 10:13:01 2020 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
Thu Sep  3 10:13:01 2020 user.notice dnsmasq: Allowing 127.0.0.0/8 responses
Thu Sep  3 10:13:02 2020 daemon.info dnsmasq[1120]: started, version 2.80 cachesize 150
Thu Sep  3 10:13:02 2020 daemon.info dnsmasq[1120]: DNS service limited to local subnets
Thu Sep  3 10:13:02 2020 daemon.info dnsmasq[1120]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Sep  3 10:13:02 2020 daemon.info dnsmasq[1120]: using local addresses only for domain test
Thu Sep  3 10:13:02 2020 daemon.info dnsmasq[1120]: using local addresses only for domain onion
Thu Sep  3 10:13:02 2020 daemon.info dnsmasq[1120]: using local addresses only for domain localhost
Thu Sep  3 10:13:02 2020 daemon.info dnsmasq[1120]: using local addresses only for domain local
Thu Sep  3 10:13:02 2020 daemon.info dnsmasq[1120]: using local addresses only for domain invalid
Thu Sep  3 10:13:02 2020 daemon.info dnsmasq[1120]: using local addresses only for domain bind
Thu Sep  3 10:13:02 2020 daemon.info dnsmasq[1120]: using local addresses only for domain lan
Thu Sep  3 10:13:02 2020 daemon.warn dnsmasq[1120]: no servers found in /tmp/resolv.conf.auto, will retry
Thu Sep  3 10:13:02 2020 daemon.info dnsmasq[1120]: read /etc/hosts - 5 addresses
Thu Sep  3 10:13:02 2020 daemon.info dnsmasq[1120]: read /tmp/hosts/dhcp.cfg01411c - 0 addresses
Thu Sep  3 10:13:03 2020 authpriv.info dropbear[1147]: Not backgrounding
Thu Sep  3 10:13:09 2020 user.notice : Added device handler type: tunnel
Thu Sep  3 10:13:09 2020 user.notice : Added device handler type: Network device
Thu Sep  3 10:13:09 2020 user.notice : Added device handler type: bridge
Thu Sep  3 10:13:09 2020 user.notice : Added device handler type: veth
Thu Sep  3 10:13:09 2020 user.notice : Added device handler type: macvlan
Thu Sep  3 10:13:09 2020 user.notice : Added device handler type: 8021ad
Thu Sep  3 10:13:09 2020 user.notice : Added device handler type: 8021q
Thu Sep  3 10:13:11 2020 daemon.err block: /dev/mtdblock2 is already mounted on /rom
Thu Sep  3 10:13:11 2020 daemon.err block: /dev/mtdblock3 is already mounted on /overlay
Thu Sep  3 10:13:15 2020 kern.debug kernel: [   35.373277] ar71xx: pll_reg 0xb8050014: 0x1a000000
Thu Sep  3 10:13:15 2020 kern.info kernel: [   35.373922] eth0: link up (1000Mbps/Full duplex)
Thu Sep  3 10:13:15 2020 kern.info kernel: [   35.378768] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Thu Sep  3 10:13:15 2020 kern.info kernel: [   35.410984] br-lan: port 1(eth0.1) entered blocking state
Thu Sep  3 10:13:15 2020 kern.info kernel: [   35.416501] br-lan: port 1(eth0.1) entered disabled state
Thu Sep  3 10:13:15 2020 kern.info kernel: [   35.422438] device eth0.1 entered promiscuous mode
Thu Sep  3 10:13:15 2020 kern.info kernel: [   35.427321] device eth0 entered promiscuous mode
Thu Sep  3 10:13:15 2020 kern.info kernel: [   35.453961] br-lan: port 1(eth0.1) entered blocking state
Thu Sep  3 10:13:15 2020 kern.info kernel: [   35.459471] br-lan: port 1(eth0.1) entered forwarding state
Thu Sep  3 10:13:15 2020 kern.info kernel: [   35.465279] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Thu Sep  3 10:13:15 2020 daemon.notice netifd: Interface 'lan' is enabled
Thu Sep  3 10:13:15 2020 daemon.notice netifd: Interface 'lan' is setting up now
Thu Sep  3 10:13:15 2020 daemon.notice netifd: Interface 'lan' is now up
Thu Sep  3 10:13:15 2020 daemon.info dnsmasq[1120]: reading /tmp/resolv.conf.auto
Thu Sep  3 10:13:15 2020 daemon.info dnsmasq[1120]: using local addresses only for domain test
Thu Sep  3 10:13:15 2020 daemon.info dnsmasq[1120]: using local addresses only for domain onion
Thu Sep  3 10:13:15 2020 daemon.info dnsmasq[1120]: using local addresses only for domain localhost
Thu Sep  3 10:13:15 2020 daemon.info dnsmasq[1120]: using local addresses only for domain local
Thu Sep  3 10:13:15 2020 daemon.info dnsmasq[1120]: using local addresses only for domain invalid
Thu Sep  3 10:13:15 2020 daemon.info dnsmasq[1120]: using local addresses only for domain bind
Thu Sep  3 10:13:15 2020 daemon.info dnsmasq[1120]: using local addresses only for domain lan
Thu Sep  3 10:13:15 2020 daemon.warn dnsmasq[1120]: ignoring nameserver 192.168.2.1 - local interface
Thu Sep  3 10:13:15 2020 daemon.notice netifd: Interface 'loopback' is enabled
Thu Sep  3 10:13:15 2020 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Sep  3 10:13:15 2020 daemon.notice netifd: Interface 'loopback' is now up
Thu Sep  3 10:13:15 2020 daemon.notice netifd: Interface 'wan' is enabled
Thu Sep  3 10:13:15 2020 daemon.notice netifd: Interface 'wan6' is enabled
Thu Sep  3 10:13:15 2020 daemon.notice netifd: bridge 'br-lan' link is up
Thu Sep  3 10:13:15 2020 daemon.notice netifd: Interface 'lan' has link connectivity
Thu Sep  3 10:13:15 2020 daemon.notice netifd: Network device 'eth0' link is up
Thu Sep  3 10:13:15 2020 daemon.notice netifd: VLAN 'eth0.1' link is up
Thu Sep  3 10:13:15 2020 daemon.notice netifd: Network device 'lo' link is up
Thu Sep  3 10:13:15 2020 daemon.notice netifd: Interface 'loopback' has link connectivity
Thu Sep  3 10:13:15 2020 daemon.notice netifd: VLAN 'eth0.2' link is up
Thu Sep  3 10:13:15 2020 daemon.notice netifd: Interface 'wan' has link connectivity
Thu Sep  3 10:13:15 2020 daemon.notice netifd: Interface 'wan' is setting up now
Thu Sep  3 10:13:15 2020 daemon.notice netifd: Interface 'wan6' has link connectivity
Thu Sep  3 10:13:15 2020 daemon.notice netifd: Interface 'wan6' is setting up now
Thu Sep  3 10:13:15 2020 daemon.notice netifd: Interface 'wan6' is now up
Thu Sep  3 10:13:16 2020 kern.info kernel: [   36.404705] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Thu Sep  3 10:13:16 2020 kern.info kernel: [   36.411709] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Thu Sep  3 10:13:17 2020 daemon.err insmod: module is already loaded - slhc
Thu Sep  3 10:13:17 2020 daemon.err insmod: module is already loaded - ppp_generic
Thu Sep  3 10:13:17 2020 daemon.err insmod: module is already loaded - pppox
Thu Sep  3 10:13:17 2020 daemon.err insmod: module is already loaded - pppoe
Thu Sep  3 10:13:21 2020 daemon.info pppd[1480]: Plugin rp-pppoe.so loaded.
Thu Sep  3 10:13:21 2020 daemon.info pppd[1480]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Thu Sep  3 10:13:21 2020 daemon.notice pppd[1480]: pppd 2.4.7 started by root, uid 0
Thu Sep  3 10:13:21 2020 daemon.info pppd[1480]: PPP session is 11785
Thu Sep  3 10:13:21 2020 daemon.warn pppd[1480]: Connected to xx:xx:xx:xx:xx:xx via interface eth0.2
Thu Sep  3 10:13:21 2020 kern.info kernel: [   41.033832] pppoe-wan: renamed from ppp0
Thu Sep  3 10:13:21 2020 daemon.info pppd[1480]: Using interface pppoe-wan
Thu Sep  3 10:13:21 2020 daemon.notice pppd[1480]: Connect: pppoe-wan <--> eth0.2
Thu Sep  3 10:13:21 2020 daemon.notice pppd[1480]: CHAP authentication succeeded
Thu Sep  3 10:13:21 2020 daemon.notice pppd[1480]: peer from calling number xx:xx:xx:xx:xx:xx authorized
Thu Sep  3 10:13:21 2020 daemon.notice pppd[1480]: local  IP address 45.x.x.x
Thu Sep  3 10:13:21 2020 daemon.notice pppd[1480]: remote IP address 20.x.x.x
Thu Sep  3 10:13:21 2020 daemon.notice pppd[1480]: primary   DNS address 45.x.x.x
Thu Sep  3 10:13:21 2020 daemon.notice pppd[1480]: secondary DNS address 45.x.x.x
Thu Sep  3 10:13:22 2020 daemon.notice netifd: Network device 'pppoe-wan' link is up
Thu Sep  3 10:13:22 2020 daemon.notice netifd: Interface 'wan' is now up
Thu Sep  3 10:13:22 2020 daemon.info dnsmasq[1120]: reading /tmp/resolv.conf.auto
Thu Sep  3 10:13:22 2020 daemon.info dnsmasq[1120]: using local addresses only for domain test
Thu Sep  3 10:13:22 2020 daemon.info dnsmasq[1120]: using local addresses only for domain onion
Thu Sep  3 10:13:22 2020 daemon.info dnsmasq[1120]: using local addresses only for domain localhost
Thu Sep  3 10:13:22 2020 daemon.info dnsmasq[1120]: using local addresses only for domain local
Thu Sep  3 10:13:22 2020 daemon.info dnsmasq[1120]: using local addresses only for domain invalid
Thu Sep  3 10:13:22 2020 daemon.info dnsmasq[1120]: using local addresses only for domain bind
Thu Sep  3 10:13:22 2020 daemon.info dnsmasq[1120]: using local addresses only for domain lan
Thu Sep  3 10:13:23 2020 daemon.warn dnsmasq[1120]: ignoring nameserver 192.168.2.1 - local interface
Thu Sep  3 10:13:23 2020 daemon.info dnsmasq[1120]: using nameserver 45.x.x.x#53
Thu Sep  3 10:13:23 2020 daemon.info dnsmasq[1120]: using nameserver 45.x.x.x#53
Thu Sep  3 10:13:23 2020 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Thu Sep  3 10:13:59 2020 daemon.info dnsmasq[1120]: exiting on receipt of SIGTERM
Thu Sep  3 10:14:03 2020 daemon.info dnsmasq[1710]: started, version 2.80 cachesize 150
Thu Sep  3 10:14:03 2020 daemon.info dnsmasq[1710]: DNS service limited to local subnets
Thu Sep  3 10:14:03 2020 daemon.info dnsmasq[1710]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Sep  3 10:14:03 2020 daemon.info dnsmasq-dhcp[1710]: DHCP, IP range 192.168.2.100 -- 192.168.2.249, lease time 12h
Thu Sep  3 10:14:03 2020 daemon.info dnsmasq[1710]: using local addresses only for domain test
Thu Sep  3 10:14:03 2020 daemon.info dnsmasq[1710]: using local addresses only for domain onion
Thu Sep  3 10:14:03 2020 daemon.info dnsmasq[1710]: using local addresses only for domain localhost
Thu Sep  3 10:14:03 2020 daemon.info dnsmasq[1710]: using local addresses only for domain local
Thu Sep  3 10:14:04 2020 daemon.info dnsmasq[1710]: using local addresses only for domain invalid
Thu Sep  3 10:14:04 2020 daemon.info dnsmasq[1710]: using local addresses only for domain bind
Thu Sep  3 10:14:04 2020 daemon.info dnsmasq[1710]: using local addresses only for domain lan
Thu Sep  3 10:14:04 2020 daemon.info dnsmasq[1710]: reading /tmp/resolv.conf.auto
Thu Sep  3 10:14:04 2020 daemon.info dnsmasq[1710]: using local addresses only for domain test
Thu Sep  3 10:14:04 2020 daemon.info dnsmasq[1710]: using local addresses only for domain onion
Thu Sep  3 10:14:04 2020 daemon.info dnsmasq[1710]: using local addresses only for domain localhost
Thu Sep  3 10:14:04 2020 daemon.info dnsmasq[1710]: using local addresses only for domain local
Thu Sep  3 10:14:04 2020 daemon.info dnsmasq[1710]: using local addresses only for domain invalid
Thu Sep  3 10:14:04 2020 daemon.info dnsmasq[1710]: using local addresses only for domain bind
Thu Sep  3 10:14:04 2020 daemon.info dnsmasq[1710]: using local addresses only for domain lan
Thu Sep  3 10:14:04 2020 daemon.warn dnsmasq[1710]: ignoring nameserver 192.168.2.1 - local interface
Thu Sep  3 10:14:04 2020 daemon.info dnsmasq[1710]: using nameserver 45.x.x.x#53
Thu Sep  3 10:14:04 2020 daemon.info dnsmasq[1710]: using nameserver 45.x.x.x#53
Thu Sep  3 10:14:04 2020 daemon.info dnsmasq[1710]: read /etc/hosts - 5 addresses
Thu Sep  3 10:14:04 2020 daemon.info dnsmasq[1710]: read /tmp/hosts/dhcp.cfg01411c - 2 addresses
Thu Sep  3 10:14:04 2020 daemon.info dnsmasq-dhcp[1710]: read /etc/ethers - 0 addresses
Thu Sep  3 10:14:14 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:14 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:14 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:14 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:19 2020 daemon.notice procd: /etc/rc.d/S96led: setting up led USB
Thu Sep  3 10:14:19 2020 daemon.notice procd: /etc/rc.d/S96led: setting up led WLAN
Thu Sep  3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:22 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:22 2020 daemon.info procd: - init complete -
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:25 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:27 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna all all
Thu Sep  3 10:14:30 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:30 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:30 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:30 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:30 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:30 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:30 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:31 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:31 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:31 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:31 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:31 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:31 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:31 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:31 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:31 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:31 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:31 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Thu Sep  3 10:14:31 2020 daemon.notice hostapd: rfkill: Cannot open RFKILL control device
Thu Sep  3 10:14:31 2020 kern.info kernel: [   82.534902] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Thu Sep  3 10:14:31 2020 kern.info kernel: [   82.632260] br-lan: port 2(wlan0) entered blocking state
Thu Sep  3 10:14:31 2020 kern.info kernel: [   82.637690] br-lan: port 2(wlan0) entered disabled state
Thu Sep  3 10:14:31 2020 kern.info kernel: [   82.643549] device wlan0 entered promiscuous mode
Thu Sep  3 10:14:31 2020 daemon.err hostapd: Using interface wlan0 with hwaddr xx:xx:xx:xx:xx:xx and ssid "Gargoyle"
Thu Sep  3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:32 2020 daemon.err uhttpd[1639]: sh: write error: Broken pipe
Thu Sep  3 10:14:33 2020 kern.info kernel: [   83.787056] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Thu Sep  3 10:14:33 2020 kern.info kernel: [   83.793657] br-lan: port 2(wlan0) entered blocking state
Thu Sep  3 10:14:33 2020 kern.info kernel: [   83.799078] br-lan: port 2(wlan0) entered forwarding state
Thu Sep  3 10:14:33 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->ENABLED
Thu Sep  3 10:14:33 2020 daemon.notice hostapd: wlan0: AP-ENABLED
Thu Sep  3 10:14:33 2020 daemon.notice netifd: Network device 'wlan0' link is up
ispyisail wrote: ↑
Thu Sep 03, 2020 5:30 am
The router is really at end of life
Yeah, I know. But the router options here in my country are terrible, old models and practically two brands only.
TL-WR1043ND v1 | 1.12.X (Built 20200610-0028 git@80899c80)
Top
Post Reply

Return to “Hardware / Installation Issues”