Converting from previous pre-installed gargoyle
Moderator: Moderators
-
- Posts: 22
- Joined: Sun Dec 29, 2013 6:13 pm
Re: Converting from previous pre-installed gargoyle
Okay. I believe I am rigged up as you requested. Mac network preferences says “configure IPv4: Using DHCP”
IP Address: 192.254.116.208. ( it was different before I restarted Mac mini.
IP Address: 192.254.116.208. ( it was different before I restarted Mac mini.
-
- Posts: 22
- Joined: Sun Dec 29, 2013 6:13 pm
Re: Converting from previous pre-installed gargoyle
Now the IP has changed to 169.254.116.208.
The status is “connected” with the note that “Ethernet has self-assigned IP address and will not be able to connect to the internet.”
The status is “connected” with the note that “Ethernet has self-assigned IP address and will not be able to connect to the internet.”
Re: Converting from previous pre-installed gargoyle
This IP address (192.254.116.208) is a public IP from your ISP and is not the IP address that Gargoyle would assign you.
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Re: Converting from previous pre-installed gargoyle
This address (169.254.116.208) will pop up if the network does not get IP from DHCP.
Is Gargoyle in default? or have you already set it up?
Is Gargoyle in default? or have you already set it up?
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
-
- Posts: 22
- Joined: Sun Dec 29, 2013 6:13 pm
Re: Converting from previous pre-installed gargoyle
I am not sure what it means to be in default.
Yesterday I connected the gargoyle router to my Mac mini with its eithernet cable and typed the 192.168.1.1 address into my web browser. As expected, I got a gargoyle page and entered the default password, which worked. I changed it, entered all the rest of the information requested on that page, and logged out to reconnect the router to the satellite modem. I then got internet service, but no ability to log back into the gargoyle browser.
Again, thank you for continuing to help.
Yesterday I connected the gargoyle router to my Mac mini with its eithernet cable and typed the 192.168.1.1 address into my web browser. As expected, I got a gargoyle page and entered the default password, which worked. I changed it, entered all the rest of the information requested on that page, and logged out to reconnect the router to the satellite modem. I then got internet service, but no ability to log back into the gargoyle browser.
Again, thank you for continuing to help.
Re: Converting from previous pre-installed gargoyle
O.K.
So it looks like you have a bad configuration, or you accidentally turned off your DHCP server.
One more try before reset to default.
Set Manual Configuration on PC:
IP: 192.168.1.101
Mask: 255.255.255.0
Gateway: 192.168.1.1
DNS: 192.168.1.1
Try if you get a ping answer:
So it looks like you have a bad configuration, or you accidentally turned off your DHCP server.
One more try before reset to default.
Set Manual Configuration on PC:
IP: 192.168.1.101
Mask: 255.255.255.0
Gateway: 192.168.1.1
DNS: 192.168.1.1
Try if you get a ping answer:
Code: Select all
ping 192.168.1.1
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
-
- Posts: 22
- Joined: Sun Dec 29, 2013 6:13 pm
Re: Converting from previous pre-installed gargoyle
Yes. I get 64 bytes from 192.168.1.1 over and over.
-
- Posts: 22
- Joined: Sun Dec 29, 2013 6:13 pm
Re: Converting from previous pre-installed gargoyle
Yes. The picture matches what I have.
Re: Converting from previous pre-installed gargoyle
Try RomanHK suggestion
Assuming GL-AR150
This is the path we are going down
1. Fail-safe rest (first option)
https://openwrt.org/docs/guide-user/tro ... tory_reset
or
2. re-flash via hardware recover (second option)
https://oldwiki.archive.openwrt.org/toh ... ftp_method
Assuming GL-AR150
This is the path we are going down
1. Fail-safe rest (first option)
https://openwrt.org/docs/guide-user/tro ... tory_reset
or
2. re-flash via hardware recover (second option)
https://oldwiki.archive.openwrt.org/toh ... ftp_method