ubnt have a good recovery procedure
have a look on there web site
https://help.ubnt.com/hc/en-us/articles ... e-Recovery
ubnt bullet m2
Moderator: Moderators
Re: ubnt bullet m2
Done that before even bothering you guys here, loads the firmware but at the end says can not load firmware does not match. I was using their airos firmware.
Re: ubnt bullet m2
Threads like this one come up every so often.
99% chance there is nothing wrong with the hardware.
The problem is usually the installer not being able to follow instructions exactly and/or basic instructions missing in the how to.
https://youtu.be/7IDbvZJesZo
My advice is to "keep trying" or "Pay somebody" or "buy a new router"
The problem with the last solution is at some point you will get the same problem again.
99% chance there is nothing wrong with the hardware.
The problem is usually the installer not being able to follow instructions exactly and/or basic instructions missing in the how to.
https://youtu.be/7IDbvZJesZo
My advice is to "keep trying" or "Pay somebody" or "buy a new router"
The problem with the last solution is at some point you will get the same problem again.
Re: ubnt bullet m2
If I was plugging a hardwired connection to a ROUTER like most of you then any idiot can follow your directions. If you want to give advice at least try some helpful advice.
Re: ubnt bullet m2
you didn't watch the youtube clip did you?
Re: ubnt bullet m2
Once again I tried all this before coming to bug you guys. So yes I did watch that exact video 3 days ago. I flash the OEM firmware and it tells me at the end that it can not load and reverts back to gargoyle.
Re: ubnt bullet m2
What version of gargoyle?
Do you want to use Gargoyle?
If you don't want to use gargoyle your in the wrong forum.
Do you want to use Gargoyle?
If you don't want to use gargoyle your in the wrong forum.
Re: ubnt bullet m2
Keep the thread respectful please.
I understand people on both sides are frustrated, but that isn’t going to solve anything.
I understand people on both sides are frustrated, but that isn’t going to solve anything.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: ubnt bullet m2
I don't want gargoyle but gargoyle won't go away. I thought I was in the right forum for help since this is the gargoyle forum obviously I was wrong.
The version I am stuck with is ubnt bullet 1.11.
Any other snot nosed questions? Let's get them out of the way now.
The version I am stuck with is ubnt bullet 1.11.
Any other snot nosed questions? Let's get them out of the way now.
Re: ubnt bullet m2
Moving forward, let’s keep it factual and civil.
If either party can’t follow that, remove yourself from the conversation.
—————————
I understand you want to revert to the factory software, we will try our best to get you back there.
Can you please list what procedure you have tried, if you used a guide please link it as well, and what the result was.
If there were errors, please also list these.
If either party can’t follow that, remove yourself from the conversation.
—————————
I understand you want to revert to the factory software, we will try our best to get you back there.
Can you please list what procedure you have tried, if you used a guide please link it as well, and what the result was.
If there were errors, please also list these.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.