Best Gargoyle version for TL-WR1043 V2?

Report problems and success stories with Gargoyle on various hardware platforms.

Moderator: Moderators

Post Reply
maxwolfie
Posts: 38
Joined: Sun Aug 23, 2009 6:34 am

Best Gargoyle version for TL-WR1043 V2?

Post by maxwolfie »

Hi all,

I recently corrupted my QoS settings in 1.6.2 by trying to change settings on multiple browser tabs. As such, I am wondering if I'm best off sticking with 1.6.2 or if I am better off flashing 1.8.1 or possibly 1.9.1?

Either way I am going to need to do a reset.

If I do flash a new version, stability is the most important thing to consider.

Any suggestions welcome :)

ispyisail
Moderator
Posts: 5185
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Best Gargoyle version for TL-WR1043 V2?

Post by ispyisail »

maxwolfie wrote:Hi all,

I recently corrupted my QoS settings in 1.6.2 by trying to change settings on multiple browser tabs. As such, I am wondering if I'm best off sticking with 1.6.2 or if I am better off flashing 1.8.1 or possibly 1.9.1?

Either way I am going to need to do a reset.

If I do flash a new version, stability is the most important thing to consider.

Any suggestions welcome :)
In my opinion 1.6.2 is better than 1.8.1 .

1.6.2 and 1.9.1 are about the same, they both have bugs.

1.9.x is currently the best but is no good on 4 meg routers.

Older 4 meg routers stick with 1.6.2

Newer 8 meg + routers 1.9.x

Post Reply