Openwrt 19.07 based Gargoyle

Discuss the technical details of Gargoyle and ongoing development

Moderator: Moderators

Post Reply
papka__
Posts: 34
Joined: Tue Nov 19, 2019 4:07 pm

Re: Openwrt 19.07 based Gargoyle

Post by papka__ »

Hi,

Will ramips build works on Newifi D2? Anyone tried?

papka__
Posts: 34
Joined: Tue Nov 19, 2019 4:07 pm

Re: Openwrt 19.07 based Gargoyle

Post by papka__ »

papka__ wrote:Hi,

Will ramips build works on Newifi D2? Anyone tried?


Answering myself. Yes. Working fine.

RomanHK
Posts: 646
Joined: Sat May 04, 2013 4:18 pm
Location: Czech Republik

Re: Openwrt 19.07 based Gargoyle

Post by RomanHK »

@Lantis, regarding Router Turris Omnia:
So I learned that Turris has its own modified packages and will not work with OpenWrt without modification - it is a hardware cripto chip (ATSHA204), a switch (VLAN creation), LED (control + rainbow), SFP port.

Based on this information, you may forget my request to include additional kernel modules - it's unnecessary :cry: , but thank you for your effort.
Turris Omnia with Gargoyle 1.12.0
Linksys WRT3200ACM with Gargoyle 1.12.0
TL-WR1043ND v2 with Gargoyle 1.10.0

Lantis
Moderator
Posts: 5630
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Openwrt 19.07 based Gargoyle

Post by Lantis »

Thanks for checking
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

kintz
Posts: 2
Joined: Sun Dec 01, 2019 2:02 pm

Re: Openwrt 19.07 based Gargoyle

Post by kintz »

Thank you for this build, been waiting for gargoyle support. I've using for 14 days on Archer C6v2 8/64 (ath79), it's working great but no much space available to install plugins (adblock). Maybe in the next build you could remove usb support as this plugin does not have an usb port.

Lantis
Moderator
Posts: 5630
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Openwrt 19.07 based Gargoyle

Post by Lantis »

How much free space is left on a new flash approximately?
I'll look at this, but I'd like to find more than 1 device which fits this category. A she new subtarget just for 1 device creates a large overhead.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

doug_porsche
Posts: 70
Joined: Fri Aug 16, 2013 3:59 pm

Re: Openwrt 19.07 based Gargoyle

Post by doug_porsche »

I installed quickly on my NETGEAR WNDR3700v4
I dont think my decoder ring is as calibrated as I would like, so sorry if the question is redundant.


Should the adblock plugin work on 1.13?

I tried the following two paths
http://lantisproject.com/gargoyle_1.11. ... arge_nand/

http://lantisproject.com/gargoyle_1.13. ... arge_nand/

after adding the plugin source, I didnt see it listed in the "Plug In" section where I would normally click the install button and then go to the Firewall and enable it.
NETGEAR WNDR3700v4 or an old Soup can with string. So hard to tell these days.

Lantis
Moderator
Posts: 5630
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Openwrt 19.07 based Gargoyle

Post by Lantis »

Install the version from here:
https://lantisproject.com/gargoyle_custom/ar71xx/
And use the plugin folders from there as well. Same name format as you has before, just different location.

I made an update to fix the adblock plugin and I don't think it made it into this version though.
If not I'll do another build it doesn't take that long.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

kintz
Posts: 2
Joined: Sun Dec 01, 2019 2:02 pm

Re: Openwrt 19.07 based Gargoyle

Post by kintz »

On a new flash only 72 kB left. I did install adblock but its not working, thought it was beacuse this "Router storage full (read only) or is mounted in volatile storage (RAM)..." but it's not obviously.
It's okay if stays like this. As long as QoS works im gonna use it. :D
Also, the C6v2 its actually 8/128.

doug_porsche
Posts: 70
Joined: Fri Aug 16, 2013 3:59 pm

Re: Openwrt 19.07 based Gargoyle

Post by doug_porsche »

Thank you.
Installed for NETGEAR WNDR3700v4's tar from https://lantisproject.com/gargoyle_custom/ar71xx/
and the adblock from https://lantisproject.com/gargoyle_cust ... arge_nand/


Update: but it does seem that Adblock is not working.
it installed and I will start monitoring/testing.
NETGEAR WNDR3700v4 or an old Soup can with string. So hard to tell these days.

Post Reply