Extroot/wireless problem

If your problem doesn't fall into one of the other categories, report it here.

Moderator: Moderators

willian
Posts: 14
Joined: Wed Mar 06, 2019 8:19 am

Extroot/wireless problem

Post by willian »

Hello.

I upgraded my TL-WR1043NDv1 that I use for testing for the gargoyle-ispy 1.11.0.x 2019-May-05 03, everything ran smoothly until I plugged in a USB stick to use as extroot. I used Gargoyle's own functionality to format the pendrive and use it as extroot. The problem is that when the router restarted, the wireless network has stopped working, it only appears as 'Disabled', without being able to change anything.

I did a test with the '1.11.0' version and also gave the same problem. I do not know if I did something wrong, I appreciate any help.

Thanks.
TL-WR1043ND v1 | 1.12.X (Built 20200610-0028 git@80899c80)

RomanHK
Posts: 794
Joined: Sat May 04, 2013 4:18 pm
Location: Czech Republik

Re: Extroot/wireless problem

Post by RomanHK »

1. Do not preserve settings.
2. Try another USB drive.
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0

http://gargoyle.romanhk.cz custom builds by gargoyle users

willian
Posts: 14
Joined: Wed Mar 06, 2019 8:19 am

Re: Extroot/wireless problem

Post by willian »

RomanHK wrote:1. Do not preserve settings.
2. Try another USB drive.
I never preserve the settings and I need to find another USB drive.
TL-WR1043ND v1 | 1.12.X (Built 20200610-0028 git@80899c80)

RomanHK
Posts: 794
Joined: Sat May 04, 2013 4:18 pm
Location: Czech Republik

Re: Extroot/wireless problem

Post by RomanHK »

Type the output from ssh command:

Code: Select all

mount
and

Code: Select all

df
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0

http://gargoyle.romanhk.cz custom builds by gargoyle users

willian
Posts: 14
Joined: Wed Mar 06, 2019 8:19 am

Re: Extroot/wireless problem

Post by willian »

RomanHK wrote:Type the output from ssh command:

Code: Select all

mount
and

Code: Select all

df
Sorry for the delay, here the output of the requested commands:

Code: Select all

root@Gargoyle:~# mount
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
/dev/sda1 on /overlay type ext4 (rw,noatime,data=ordered)
overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600,ptmxmode=000)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)

root@Gargoyle:~# df -h
Filesystem                Size      Used Available Use% Mounted on
/dev/root                 5.5M      5.5M         0 100% /rom
tmpfs                    13.5M     76.0K     13.4M   1% /tmp
/dev/sda1                 3.0G     11.2M      2.8G   0% /overlay
overlayfs:/overlay        3.0G     11.2M      2.8G   0% /
tmpfs                   512.0K         0    512.0K   0% /dev
TL-WR1043ND v1 | 1.12.X (Built 20200610-0028 git@80899c80)

RomanHK
Posts: 794
Joined: Sat May 04, 2013 4:18 pm
Location: Czech Republik

Re: Extroot/wireless problem

Post by RomanHK »

Try to delete /overlay and start again.

Code: Select all

rm -r /overlay/* && reboot -f
I suspect that 32MB of RAM will not be enough for these operations in 1.11.X.
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0

http://gargoyle.romanhk.cz custom builds by gargoyle users

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Extroot/wireless problem

Post by Lantis »

Just reset to default and try again.
Lets not go hunting obscure bugs until we've ruled out user error or misadventure.

If it fails on you again, please post your exact steps, and i'll follow them and see if i can replicate the issue. :)
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

willian
Posts: 14
Joined: Wed Mar 06, 2019 8:19 am

Re: Extroot/wireless problem

Post by willian »

Lantis wrote:Just reset to default and try again.
Lets not go hunting obscure bugs until we've ruled out user error or misadventure.

If it fails on you again, please post your exact steps, and i'll follow them and see if i can replicate the issue. :)
I've already done this, incusive I went back to the original firmware of TP-Link just to do a "clean install".

The steps I took:
  1. I installed gargoyle-ispy 1.11.0.x 2019-May-05 03

    I logged in first, changed the password and timezone

    I configured the WAN (PPPoE), LAN and WLAN connections. Everything worked normally.

    I connected the pendrive, unmount, formatted and marked to be used as extroot (all by Gargoyle himself)

    After that I did nothing else, the router just reset and then stop the wireless network.
In the Plugins tab appears as the rootdrive the pendrive, and the output of the commands I posted above seems ok.
RomanHK wrote:Try to delete /overlay and start again.

Code: Select all

rm -r /overlay/* && reboot -f
I suspect that 32MB of RAM will not be enough for these operations in 1.11.X.
I'm not at home now, so I can not access the router to do any testing / change.
TL-WR1043ND v1 | 1.12.X (Built 20200610-0028 git@80899c80)

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Extroot/wireless problem

Post by Lantis »

So the router reboots ok, but the wireless is no longer transmitting? Or the wireless is no longer configured?
How long before the router reset? Or did it reset immediately after making the setting?
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

RomanHK
Posts: 794
Joined: Sat May 04, 2013 4:18 pm
Location: Czech Republik

Re: Extroot/wireless problem

Post by RomanHK »

as_w wrote: I'm not at home now, so I can not access the router to do any testing / change.
O.K.

Oh, I see a problem. The first is to create an extroot and then a custom configuration.

With my command line, you just clean up USB, the extroot should stay.
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0

http://gargoyle.romanhk.cz custom builds by gargoyle users

Post Reply