Sir I have 2 questions
If i buy any listed router and flash the gargoyle will the normal performance of the router will vary
which is the best one as of now which will give good performence with good wireless range
will the router have all pervios menu and gargoil will be an addon or gargoil will have its own details menu for all configerations
can i try an unlisted router? what file i must use for linksys x3000 model router
i am not an expert so this foolish questions
please help
Configeration
Moderator: Moderators
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Configeration
You have to check OpenWRT website for routers that are supported
Any router supported by Attitude Adjustment branch of OpenWRT
should also be supported by Gargoyle
Quickest way to see what routers are supported are to look
in the Download section and scroll down the available downloads.
If the specific router and hardware version exists in the download
section, then you should be able to flash that router
Some of the newer 5GHZ routers are NOT supported yet, they have
to be supported in OpenWRT before they are supported in
the Gargoyle builds because Gargoyle uses OpenWRT as a base
Any router supported by Attitude Adjustment branch of OpenWRT
should also be supported by Gargoyle
Quickest way to see what routers are supported are to look
in the Download section and scroll down the available downloads.
If the specific router and hardware version exists in the download
section, then you should be able to flash that router
Some of the newer 5GHZ routers are NOT supported yet, they have
to be supported in OpenWRT before they are supported in
the Gargoyle builds because Gargoyle uses OpenWRT as a base
Soylent Green Is People!
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
Re: Configeration
Thank you sir very much
I brought TpLink wdr3600 and installed Garoyle
working very good
Sorry for delay in reply
i had forgotten my password
I brought TpLink wdr3600 and installed Garoyle
working very good
Sorry for delay in reply
i had forgotten my password