Hello,
I have a Samsung USB printer, and was able to connect it with my WRT1200AC router with v1.11RC5.
When printer is on, it shows the printer and I am able to send prints from my home-office devices to printer without issues.
When printer goes in sleep mode / auto power off, the prints are kept on client devices, local spool.
What I want is to router's print server to have a spool and accept prints even printer is offline. So a person can send the print from his desk, can turn off PC, and get to printer room to turn on printer, collect the print.
Is this possible? or I should be happy with non-spool print server?
Print Server Spool?
Moderator: Moderators
Re: Print Server Spool?
1. Unfortunately, p910nd does not support spool, works directly.
2. Memory may be a problem.
2. Memory may be a problem.
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
-
chall3ng3r
- Posts: 14
- Joined: Sun Dec 30, 2018 4:19 pm
Re: Print Server Spool?
Thanks for your reply,
Previously I connected my printer to Windows server which is file server, auto PC backup server etc. I guess, I'll have to wire printer back to it again.
Previously I connected my printer to Windows server which is file server, auto PC backup server etc. I guess, I'll have to wire printer back to it again.