Some basic network details:
Router A:
WAN IP Address: 192.168.1.65
WAN Netmask: 255.255.255.0
LAN IP Address: 192.168.0.1
LAN Netmask:255.255.255.0
DHCP On while having wireless extender (dumb switch) at 192.168.0.254
Client Gateway : 192.168.0.1
Router B:
WAN IP Address: 192.168.1.64
WAN Netmask: 255.255.255.0
LAN IP Address: 192.168.2.1
LAN Netmask:255.255.255.0
DHCP On
Client Gateway : 192.168.2.1
Both router A & B are wired to internet modem (192.168.1.1).
I've set the static routing for router A and B as follows:
Router A:
192.168.2.0/255.255.255.0 wan 192.168.1.64
Router B:
192.168.0.0/255.255.255.0 wan 192.168.1.65
While i can both ping and access gargoyle web management page in router A from the second network and vice versa. But when i am trying to ping wireless extender from the second network i get Reply from 192.168.1.65: Destination port unreachable, and when i open the gargoyle web management for wireless extender (192.168.0.254 in browser) i get the router A gargoyle web management instead of the wireless extender.
Here some traceroute to router A and wireless extender from the second network:
To router A
Code: Select all
Tracing route to 192.168.0.1 over a maximum of 30 hops
1 1 ms 1 ms 2 ms Gargoyle.lan [192.168.2.1]
2 4 ms 1 ms 2 ms 192.168.0.1
Trace complete.
Code: Select all
Tracing route to 192.168.0.254 over a maximum of 30 hops
1 1 ms 1 ms 2 ms Gargoyle.lan [192.168.2.1]
2 1 ms 2 ms 2 ms 192.168.1.65
3 192.168.1.65 reports: Destination protocol unreachable.
Trace complete.
Thank you very much for your reads and help in advance! This seems like it should be a simple thing, but I am having incredible difficulty with this..
note:
[*]Router A, B, and the wireless extender all running gargoyle, while the internet modem is Alcatel Lucent
I-240W-A.
[*]I have administrative access to all devices.