Version 1.9.1

The latest news about Gargoyle

Moderator: Moderators

Lantis
Moderator
Posts: 5388
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Version 1.9.1

Post by Lantis »

I'm not seeing this behaviour.
My SSH is not accessible from the WAN side with the default config.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

Rog66
Posts: 206
Joined: Fri Jan 04, 2013 4:53 pm

Re: Version 1.9.1

Post by Rog66 »

Same here - port 22 blocked from outside and working inside

oliver
Posts: 32
Joined: Wed Jun 04, 2014 7:30 pm

Re: Version 1.9.1

Post by oliver »

Here's what I get with my modified dropbear config:

Code: Select all

# nmap -p 22 --open -sV 192.168.1.1

Starting Nmap 7.31 ( https://nmap.org ) at 2016-11-20 09:08 EST
Nmap scan report for gargoyle (192.168.1.1)
Host is up (0.0017s latency).
PORT   STATE SERVICE VERSION
22/tcp open  ssh     Dropbear sshd 2015.67 (protocol 2.0)
Service Info: OS: Linux; CPE: cpe:/o:linux:linux_kernel


Code: Select all

# nmap -p 22 --open -sV notmyrealhostname.duckdns.org

Starting Nmap 7.31 ( https://nmap.org ) at 2016-11-20 09:08 EST
Service detection performed. Please report any incorrect results at https://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 1.33 seconds


Then I change the dropbear config back to what I had a few days ago.

Code: Select all

/etc/config# cp dropbear.dist dropbear
/etc/config# /etc/init.d/dropbear restart


Code: Select all

# nmap -p 22 --open -sV garg.duckdns.org

Starting Nmap 7.31 ( https://nmap.org ) at 2016-11-20 09:11 EST
Nmap scan report for notmyrealhostname.duckdns.org (x.x.x.x)
Host is up (0.0019s latency).
rDNS record for x.x.x.x: x-x-x-x.hsd1.ga.comcast.net
PORT   STATE SERVICE VERSION
22/tcp open  ssh     Dropbear sshd 2015.67 (protocol 2.0)
Service Info: OS: Linux; CPE: cpe:/o:linux:linux_kernel


Code: Select all

# ssh root@notmyrealhostname.duckdns.org
The authenticity of host 'notmyrealhostname.duckdns.org (x.x.x.x)' can't be established.
RSA key fingerprint is SHA256:59+5OCxagGFo+hfLwS4fdsfdsfdsfdsfdsfdsfds.
Are you sure you want to continue connecting (yes/no)? ^C


Code: Select all

# cat /etc/config/dropbear.dist
config dropbear 'global'
        option PasswordAuth 'on'
        option Port '22'


Code: Select all

# cat /etc/config/dropbear.lanonly
config dropbear
        option PasswordAuth 'on'
        option Port '22'
        option Interface 'lan'


Code: Select all

Device Name:Gargoyle
Gargoyle Version:1.9.1
Model:TP-Link TL-WDR3600 v1
Device Configuration:Gateway

Lantis
Moderator
Posts: 5388
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Version 1.9.1

Post by Lantis »

the default firewall should block this. An exception is placed if you enable remote ssh.

Please test a fresh installation.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

oliver
Posts: 32
Joined: Wed Jun 04, 2014 7:30 pm

Re: Version 1.9.1

Post by oliver »

Lantis wrote:the default firewall should block this. An exception is placed if you enable remote ssh.

Please test a fresh installation.


TBH, I'd rather not :-) It took me way too long to get things set up correctly. I'd be happy to test it out again on the next release though.

I can't say 100% for certain that I'd never enabled SSH from WAN but I can't imagine why and it would have been in error. Also, wouldn't the GUI have reflected the change?

prichard
Posts: 5
Joined: Fri Dec 02, 2016 9:45 pm

Re: Version 1.9.1

Post by prichard »

I'm curious
When will a new stable build go out? :D
I have a suggestion that routers with 8mb+ that come with SQM QoS

jayt
Posts: 14
Joined: Wed Jul 27, 2011 8:44 pm

Re: Version 1.9.1

Post by jayt »

I see some ramips routers are now supported. Just curious as to the wifi driver included in the firmware for the Xiaomi MiWiFi Mini. Is it the openwrt wifi driver?

Thanks.
Buffalo WZR-HP-G300NH 1.9.0

Lantis
Moderator
Posts: 5388
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Version 1.9.1

Post by Lantis »

jayt wrote:I see some ramips routers are now supported. Just curious as to the wifi driver included in the firmware for the Xiaomi MiWiFi Mini. Is it the openwrt wifi driver?

Thanks.


Some of them use the mt76 driver. I believe the MiWiFi Mini is included in this list.
I could not figure out what the rest use
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

jayt
Posts: 14
Joined: Wed Jul 27, 2011 8:44 pm

Re: Version 1.9.1

Post by jayt »

Lantis wrote:Some of them use the mt76 driver. I believe the MiWiFi Mini is included in this list.
I could not figure out what the rest use


Thank you for the reply.

Do you think it would be OK to install the "Breed" bootloader and use it with Gargoyle?
Buffalo WZR-HP-G300NH 1.9.0

Lantis
Moderator
Posts: 5388
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Version 1.9.1

Post by Lantis »

Wouldn't have a clue. I don't customise my bootloaders.

If it works with Openwrt, it's more than likely to work with Gargoyle.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

Post Reply