Versions 1.9.0 & 1.8.1

The latest news about Gargoyle

Moderator: Moderators

jd45321
Posts: 26
Joined: Tue Dec 01, 2015 5:08 pm

Re: Versions 1.9.0 & 1.8.1

Postby jd45321 » Fri Dec 18, 2015 11:13 pm

Lantis wrote:I'm rewriting a lot of the code for that page and as a result this bug should be fixed.
Won't be finished until Friday.


Where do you get this newer version? The download page still shows 1.9.0?

jd45321
Posts: 26
Joined: Tue Dec 01, 2015 5:08 pm

Re: Versions 1.9.0 & 1.8.1

Postby jd45321 » Fri Dec 18, 2015 11:21 pm

I may have found a small bug in 1.9.0. Just installed on my TL WDR3600, Was running 1.8.1 before. Loaded without preserving settings. When I was inputing my previous settings, I tried adding static addresses on DHCP page. Even though there were hosts connected (showing on Connected Hosts tab), they were not showing up on the "Select Hostname/Mac address from Currently Selected Hosts" drop down. I had to add them by hand.

Thanks

Lantis
Moderator
Posts: 5007
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Versions 1.9.0 & 1.8.1

Postby Lantis » Sat Dec 19, 2015 12:09 am

jd45321 wrote:
Lantis wrote:I'm rewriting a lot of the code for that page and as a result this bug should be fixed.
Won't be finished until Friday.


Where do you get this newer version? The download page still shows 1.9.0?


It will be released as an unofficial version once it is accepted.
For now you can build your own version with the code from the git repository.
I found a couple small bugs with it today but i'll fix it within a few hours.
Routers: Various ar71xx/mvebu/x86-64
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases

jd45321
Posts: 26
Joined: Tue Dec 01, 2015 5:08 pm

Re: Versions 1.9.0 & 1.8.1

Postby jd45321 » Sat Dec 19, 2015 2:05 am

Lantis wrote:
jd45321 wrote:
Where do you get this newer version? The download page still shows 1.9.0?


It will be released as an unofficial version once it is accepted.
For now you can build your own version with the code from the git repository.
I found a couple small bugs with it today but i'll fix it within a few hours.



Thanks, I don't know how to build my own version so I will wait for next release.

Lantis
Moderator
Posts: 5007
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Versions 1.9.0 & 1.8.1

Postby Lantis » Mon Dec 28, 2015 3:45 am

pretty sure i've figured out why wireless client bridging isn't working... will work on it.
Routers: Various ar71xx/mvebu/x86-64
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases

-KAPMA-
Posts: 24
Joined: Thu Nov 19, 2015 6:06 am

Re: Versions 1.9.0 & 1.8.1

Postby -KAPMA- » Mon Dec 28, 2015 1:44 pm

Lantis wrote:pretty sure i've figured out why wireless client bridging isn't working... will work on it.


This will be the best gift for the new year if the Wi-Fi bridge work.

oliver
Posts: 28
Joined: Wed Jun 04, 2014 7:30 pm

Re: Versions 1.9.0 & 1.8.1

Postby oliver » Mon Dec 28, 2015 5:56 pm

jd45321 wrote:I may have found a small bug in 1.9.0. Just installed on my TL WDR3600, Was running 1.8.1 before. Loaded without preserving settings. When I was inputing my previous settings, I tried adding static addresses on DHCP page. Even though there were hosts connected (showing on Connected Hosts tab), they were not showing up on the "Select Hostname/Mac address from Currently Selected Hosts" drop down. I had to add them by hand.

Thanks


I saw this too (and also on a TL WDR3600) - I was wondering if it was only supposed to list the addresses assigned by the DHCP server (my static ones obviously weren't)

Lantis
Moderator
Posts: 5007
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Versions 1.9.0 & 1.8.1

Postby Lantis » Mon Dec 28, 2015 6:12 pm

-KAPMA- wrote:
Lantis wrote:pretty sure i've figured out why wireless client bridging isn't working... will work on it.


This will be the best gift for the new year if the Wi-Fi bridge work.



New fix has been committed to the code. Hopefully will see a build by ispyisail in the next few days which includes it. Keep your eye on the show and tell forum for a build that includes "arpnat patch". I'll try and make it obvious in the post that you should try it.
Routers: Various ar71xx/mvebu/x86-64
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases

digitalbk
Posts: 7
Joined: Fri Jan 01, 2016 2:45 am

Re: Versions 1.9.0 & 1.8.1

Postby digitalbk » Fri Jan 01, 2016 2:50 am

Dear Eric & Team,
Your project gargoyle is wonderful.
In 1.8.1 & 1.9.0 I am facing some issues with TPlink 841 V9.
First of all no Display of users in Wireless connected on user connected page.
2ndly I have set the qouta that reset on 1st of the month but its still not reset even date is change today.

Before it I have 841v5 with 1.6.2 and there is no issue with that and for long time I used that as I bought new router V9 there is no file with this version in 1.6.2. :(
Please check thank you!.

Lantis
Moderator
Posts: 5007
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Versions 1.9.0 & 1.8.1

Postby Lantis » Fri Jan 01, 2016 3:02 am

digitalbk wrote:Dear Eric & Team,
Your project gargoyle is wonderful.
In 1.8.1 & 1.9.0 I am facing some issues with TPlink 841 V9.
First of all no Display of users in Wireless connected on user connected page.
2ndly I have set the qouta that reset on 1st of the month but its still not reset even date is change today.

Before it I have 841v5 with 1.6.2 and there is no issue with that and for long time I used that as I bought new router V9 there is no file with this version in 1.6.2. :(
Please check thank you!.



Please update to the latest code release of the 1.9.X branch. Several bugs have been fixed. Your first issue is certainly fixed. Your second one i'm not so sure about.
viewtopic.php?f=14&t=8136
Routers: Various ar71xx/mvebu/x86-64
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases


Return to “News”

Who is online

Users browsing this forum: No registered users and 3 guests