Version 1.8.0 - Stable

The latest news about Gargoyle

Moderator: Moderators

Post Reply
pyron83
Posts: 2
Joined: Thu Jul 03, 2014 2:37 am

Re: Version 1.8.0 - Stable

Post by pyron83 »

Installed 1.8.0 yesterday on my WDR-4300 v1

First impression is wonderful:
-look stable
-save in menus is fast as 1.7.x
-no real glitches until now

there is only a big down:
-lan to wifi transfer rate is ugly: I have a pc with a 100 mb/s ethernet card and a another pc with a 150 mbps (40 mhz)) wifi usb card:
*with 1.6.2 I used to have an average transfer rate of 11 mb/s
*with 1.8.0 I can't get over 5 mb/s and I don't know why... I think I faced a similar problema with 1.7.x

chandran
Posts: 33
Joined: Mon Jun 02, 2014 10:08 am

Re: Version 1.8.0 - Stable

Post by chandran »

freq sudden restarts is being experienced in my router after upgrade, what is the solution?

meow99
Posts: 2
Joined: Fri Aug 28, 2015 10:42 pm

Re: Version 1.8.0 - Stable

Post by meow99 »

I can still ping devices on the 5GHz guest network on 1.8.0. I use a TL-WDR4300.

shiai
Posts: 2
Joined: Sun Aug 30, 2015 3:24 am

Re: Version 1.8.0 - Stable

Post by shiai »

Upgraded from 1.6.2 to 1.8 on WDR4300 1.7. No Problems so far.

Edit:

After installing Tor and Abblock several issues:
- Uninstalling Tor and Adblock not possible
- Adding plugin source not possible
- Reset do default Configuration not possible

To Reset I had to install 1.8 again.

sonic2000
Posts: 9
Joined: Sun Jan 11, 2015 2:14 am

Re: Version 1.8.0 - Stable

Post by sonic2000 »

WDR3600v1 Update

2.4 ssid unresponsive after about 48 hours, requires reboot of router to resolve. No issue with 5.2.

google736
Posts: 1
Joined: Mon Aug 31, 2015 2:02 am

Re: Version 1.8.0 - Stable

Post by google736 »

## 31/8/15, TL-1043nd version 1.11 upgrade from 1.71 to 1.8
upgrading successfully with clean configuration
i config back my setting manual
thank you for the latest version

uysiquebien
Posts: 58
Joined: Fri Jan 03, 2014 2:01 pm

Re: Version 1.8.0 - Stable

Post by uysiquebien »

s0ne wrote:
emukim wrote:941nd v3 working well with 1.8.0
without trying to preserve setting
restore default Configuration before upgrade from 1.6.2 to 1.8.0
I also have a TL-WR941ND (v3.2) and since Gargoyle 1.6.0 I'm having trouble with saving my settings. It seems that some time after flashing, the router memory becomes read-only and new settings don't stick. Have you ever get something like that?
That usually happens to me when the "hard disk" is full.

Gezzanet
Posts: 4
Joined: Sat Mar 03, 2012 5:00 pm

Re: Version 1.8.0 - Stable

Post by Gezzanet »

successfully upgraded from 1.6.0 to 1.8.0 on a WNDR3700v2. didnt preserve settings. :D

sonic2000
Posts: 9
Joined: Sun Jan 11, 2015 2:14 am

Re: Version 1.8.0 - Stable

Post by sonic2000 »

New adblock plugin has a bug. Exempt IP range will no exempt all DNS queries - that is some will still get blocked even after dnsflush.

WDR3600v1 Update

2.4 ssid unresponsive after about 48 hours, requires reboot of router to resolve. No issue with 5.2.

Lantis
Moderator
Posts: 6735
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Version 1.8.0 - Stable

Post by Lantis »

sonic2000 wrote:New adblock plugin has a bug. Exempt IP range will no exempt all DNS queries - that is some will still get blocked even after dnsflush.
More details please.
Steps to reproduce problem.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

Post Reply