Version 1.8.0 - Stable

The latest news about Gargoyle

Moderator: Moderators

pc168
Posts: 19
Joined: Mon Oct 08, 2012 3:15 am

Re: Version 1.8.0 - Stable

Post by pc168 »

Just installed in 3700v4 (from stock firmware V1.0.2.80 to gargoyle). So far so good. For instance, it works fine with the TP-LINK T4U AC1200 usb adapter (mostly using the 5GHz).

GordonG
Posts: 6
Joined: Thu Sep 03, 2015 10:42 am

Re: Version 1.8.0 - Stable

Post by GordonG »

Hello Gargoyle Team

do you have a Roadmap when you are going to publish 1.9.0? I do not want to offend someone, I'm just curious and like to play around ;)

Thx all for your effort
- TP-Link Archer C7 v2, Gargoyle 1.8.0, language english - not native

nworbnhoj
Posts: 914
Joined: Mon Jul 21, 2014 10:08 am
Location: Australia
Contact:

Re: Version 1.8.0 - Stable

Post by nworbnhoj »

Can you help someone else get Gargoyle up and running?
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E

pepsi82
Posts: 12
Joined: Mon Apr 13, 2015 6:13 am

Re: Version 1.8.0 - Stable

Post by pepsi82 »

i have a problem with 1.8.0 on tl-wr841nd v9

when i transfer some file from my laptop on raspberry by wireless, my internet connection is freezing

this problem i haven't on 1.7.2

someone have same problem?

Regards

ViBE
Posts: 154
Joined: Sun Apr 19, 2015 6:58 pm

Re: Version 1.8.0 - Stable

Post by ViBE »

any possibilities for TP-Link WR720N v1.x support? the original firmware is so dumb...

LHoust
Posts: 18
Joined: Fri May 27, 2011 1:22 pm
Location: Canada

Re: Version 1.8.0 - Stable

Post by LHoust »

I had been running 1.8.0 on a TP-WR941ND V3.6 (Settings were NOT preserved, the Wireless is being NOT used) for a few weeks and had NOT noticed any "Problems". Yesterday after updating a few DHCP Entries, the bottom half had "Disappeared". Followed by the Router being unable to execute a Soft "Restore to Default Configuration", although pressing the Reset Button for 30 Seconds was successful. Restored my previous 1.8.0 Configuration (a few weeks old), were the bottom of my Existing DHCP Entries had "Blank" Host-names??? Total Number of DHCP Entries 100...

I have returned to 1.6.2...

rfdude
Posts: 41
Joined: Sat May 08, 2010 2:16 pm

Re: Version 1.8.0 - DHCP Renewal every 16 min

Post by rfdude »

My Asus WL-500G Premium V1, running Gargoyle 1.8.0 feeds an open-mesh network that is in bridge mode. So all DHCP requests are handled out of the Gargoyle router. The Open-Mesh gateway goes down at least once per day, and then recovers. Looking at the Gargoyle log files, they get filled by DHCP requests every 15 to 18 minutes. Below is an excerpt. I didn't have this issue with 1.6.2. DHCP lease time is set to 72 hours. Any ideas?


Sun Oct 25 19:08:51 2015 daemon.info dnsmasq-dhcp[1243]: DHCPOFFER(br-lan) 192.168.1.100 70:72:cf:25:e3:22
Sun Oct 25 19:08:51 2015 daemon.info dnsmasq-dhcp[1243]: DHCPREQUEST(br-lan) 192.168.1.100 70:72:cf:25:e3:22
Sun Oct 25 19:08:51 2015 daemon.info dnsmasq-dhcp[1243]: DHCPACK(br-lan) 192.168.1.100 70:72:cf:25:e3:22 Gateway
Sun Oct 25 19:13:20 2015 daemon.info dnsmasq-dhcp[1243]: DHCPRELEASE(br-lan) 192.168.1.195 00:62:6e:4e:fe:15
Sun Oct 25 19:13:20 2015 daemon.info dnsmasq-dhcp[1243]: DHCPDISCOVER(br-lan) 192.168.1.195 00:62:6e:4e:fe:15
Sun Oct 25 19:13:20 2015 daemon.info dnsmasq-dhcp[1243]: DHCPOFFER(br-lan) 192.168.1.195 00:62:6e:4e:fe:15
Sun Oct 25 19:13:20 2015 daemon.info dnsmasq-dhcp[1243]: DHCPREQUEST(br-lan) 192.168.1.195 00:62:6e:4e:fe:15
Sun Oct 25 19:13:20 2015 daemon.info dnsmasq-dhcp[1243]: DHCPACK(br-lan) 192.168.1.195 00:62:6e:4e:fe:15
Sun Oct 25 19:15:23 2015 daemon.info dnsmasq-dhcp[1243]: DHCPRELEASE(br-lan) 192.168.1.120 00:62:6e:4e:3b:0c
Sun Oct 25 19:15:24 2015 daemon.info dnsmasq-dhcp[1243]: DHCPDISCOVER(br-lan) 192.168.1.120 00:62:6e:4e:3b:0c
Sun Oct 25 19:15:24 2015 daemon.info dnsmasq-dhcp[1243]: DHCPOFFER(br-lan) 192.168.1.120 00:62:6e:4e:3b:0c
Sun Oct 25 19:15:24 2015 daemon.info dnsmasq-dhcp[1243]: DHCPREQUEST(br-lan) 192.168.1.120 00:62:6e:4e:3b:0c
Sun Oct 25 19:15:24 2015 daemon.info dnsmasq-dhcp[1243]: DHCPACK(br-lan) 192.168.1.120 00:62:6e:4e:3b:0c Camera
Sun Oct 25 19:17:20 2015 daemon.info dnsmasq-dhcp[1243]: DHCPDISCOVER(br-lan) ac:86:74:04:4a:20
Sun Oct 25 19:17:20 2015 daemon.info dnsmasq-dhcp[1243]: DHCPOFFER(br-lan) 192.168.1.102 ac:86:74:04:4a:20
Sun Oct 25 19:17:20 2015 daemon.info dnsmasq-dhcp[1243]: DHCPREQUEST(br-lan) 192.168.1.102 ac:86:74:04:4a:20
Sun Oct 25 19:17:20 2015 daemon.info dnsmasq-dhcp[1243]: DHCPACK(br-lan) 192.168.1.102 ac:86:74:04:4a:20 SSC
Sun Oct 25 19:18:45 2015 daemon.info dnsmasq-dhcp[1243]: DHCPREQUEST(br-lan) 192.168.1.179 28:e1:4c:f0:f0:bb
Sun Oct 25 19:18:45 2015 daemon.info dnsmasq-dhcp[1243]: DHCPACK(br-lan) 192.168.1.179 28:e1:4c:f0:f0:bb iPhone
Sun Oct 25 19:23:21 2015 daemon.info dnsmasq-dhcp[1243]: DHCPRELEASE(br-lan) 192.168.1.195 00:62:6e:4e:fe:15
Sun Oct 25 19:23:21 2015 daemon.info dnsmasq-dhcp[1243]: DHCPDISCOVER(br-lan) 192.168.1.195 00:62:6e:4e:fe:15
Sun Oct 25 19:23:21 2015 daemon.info dnsmasq-dhcp[1243]: DHCPOFFER(br-lan) 192.168.1.195 00:62:6e:4e:fe:15
Sun Oct 25 19:23:21 2015 daemon.info dnsmasq-dhcp[1243]: DHCPREQUEST(br-lan) 192.168.1.195 00:62:6e:4e:fe:15
Sun Oct 25 19:23:21 2015 daemon.info dnsmasq-dhcp[1243]: DHCPACK(br-lan) 192.168.1.195 00:62:6e:4e:fe:15
Sun Oct 25 19:25:24 2015 daemon.info dnsmasq-dhcp[1243]: DHCPRELEASE(br-lan) 192.168.1.120 00:62:6e:4e:3b:0c
Sun Oct 25 19:25:24 2015 daemon.info dnsmasq-dhcp[1243]: DHCPDISCOVER(br-lan) 192.168.1.120 00:62:6e:4e:3b:0c
Sun Oct 25 19:25:24 2015 daemon.info dnsmasq-dhcp[1243]: DHCPOFFER(br-lan) 192.168.1.120 00:62:6e:4e:3b:0c
Sun Oct 25 19:25:24 2015 daemon.info dnsmasq-dhcp[1243]: DHCPREQUEST(br-lan) 192.168.1.120 00:62:6e:4e:3b:0c
Sun Oct 25 19:25:24 2015 daemon.info dnsmasq-dhcp[1243]: DHCPACK(br-lan) 192.168.1.120 00:62:6e:4e:3b:0c Camera
Sun Oct 25 19:25:41 2015 daemon.info dnsmasq-dhcp[1243]: DHCPDISCOVER(br-lan) 70:72:cf:25:e3:22
Sun Oct 25 19:25:41 2015 daemon.info dnsmasq-dhcp[1243]: DHCPOFFER(br-lan) 192.168.1.100 70:72:cf:25:e3:22
Sun Oct 25 19:25:41 2015 daemon.info dnsmasq-dhcp[1243]: DHCPREQUEST(br-lan) 192.168.1.100 70:72:cf:25:e3:22
Sun Oct 25 19:25:41 2015 daemon.info dnsmasq-dhcp[1243]: DHCPACK(br-lan) 192.168.1.100 70:72:cf:25:e3:22 Gateway
Sun Oct 25 19:26:38 2015 daemon.info dnsmasq-dhcp[1243]: DHCPREQUEST(br-lan) 192.168.1.100 70:72:cf:25:e3:22
Sun Oct 25 19:26:38 2015 daemon.info dnsmasq-dhcp[1243]: DHCPACK(br-lan) 192.168.1.100 70:72:cf:25:e3:22 Gateway
Sun Oct 25 19:26:38 2015 daemon.info dnsmasq-dhcp[1243]: DHCPRELEASE(br-lan) 192.168.1.100 70:72:cf:25:e3:22
Success
rfdude
------------------
1.09.2 Buffalo WZR-HP-G300NH2 -> 8 OpenMesh AP's
1.10.0 Archer C7 -> Multiple Cisco 1702i Autonomous Mode

gumball3000
Posts: 28
Joined: Mon Apr 08, 2013 8:20 am

Re: Version 1.8.0 - Stable

Post by gumball3000 »

There is any chance that in v1.90 we could have 802.1x support for Gateway-Wireless client mode?

Now i have to use DD-WRT so I could connect to this type of wi-fi networks.

Thank you in advance!

wallythacker
Posts: 14
Joined: Wed Oct 28, 2015 12:14 pm

Re: Version 1.8.0 - Stable

Post by wallythacker »

Flashed 2 WDR4300's with 1.8.0

1st unit, virgin flashing, went fine, login & configure with no problem.

2nd unit, previously flashed 20x with everything under the sun, login, configure, save = brick. Unit self recovered to TP-Link factory firmware.

Flash again with 1.8.0, login, configure, save = no problems.

So far, under 24 hr. stress test 1st unit is 100% rock solid.

A big hat tip to everyone involved. Best firmware for a router I've ever used.

gumball3000
Posts: 28
Joined: Mon Apr 08, 2013 8:20 am

Re: Version 1.8.0 - Stable

Post by gumball3000 »

[BUG REPORT] Updated 1043nd v2 from 1.6.2 to 1.8.0, Restore default configuration doesn't work anymore.

I also tried with different browsers.

Post Reply