Version 1.7.1 - Guest Network Support

The latest news about Gargoyle

Moderator: Moderators

jki
Posts: 8
Joined: Sat Jul 14, 2012 3:00 pm

Re: Version 1.7.1 - Guest Network Support

Post by jki »

The DLNA forwarding bug as described in http://www.gargoyle-router.com/phpbb/viewtopic.php?f=11&t=6647&p=26981 persists with 1.7.1 - just in case it was supposed to be addressed. Thanks in advance for looking into it!

Evzen
Posts: 16
Joined: Tue Mar 10, 2015 7:03 pm

Re: Version 1.7.1 - Guest Network Support

Post by Evzen »

VAMET wrote:/etc/init.d/bwmon_gargoyle disable
or
/etc/init.d/bwmon_gargoyle stop

BTW, this "disable" switch looks rather like some myth or something...
Looking in the "bwmon_gargoyle" script, there is no "disable" section in there.

Can someone explain this?
Is it some Linux scripting magic I'm not aware of? (I'm a Linux newbie)
Or is it perhaps some obsolete, long-time-nonexisting switch, which just gets repeated over and over during the years?
UPC broadband 240/20 Mbit
TP-LINK TL-WDR4300 v1.7

Lantis
Moderator
Posts: 5539
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Version 1.7.1 - Guest Network Support

Post by Lantis »

Pretty sure it's a shortcut to some Linux trickery.
It removes the symlink in the rc.d folder.
The enable switch case does the opposite.

I believe it's a shortcut to running the following command
http://manpages.ubuntu.com/manpages/pre ... c.d.8.html

But I can't be 100% sure. I just know it's never failed to work for me despite as you say scripts not having enable or disable functions.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

User avatar
VAMET
Posts: 35
Joined: Thu Oct 23, 2014 7:25 pm
Location: Gdynia, Poland
Contact:

Re: Version 1.7.1 - Guest Network Support

Post by VAMET »

Dear Evzen

Evzen wrote:
VAMET wrote:/etc/init.d/bwmon_gargoyle disable
or
/etc/init.d/bwmon_gargoyle stop

BTW, this "disable" switch looks rather like some myth or something...
Looking in the "bwmon_gargoyle" script, there is no "disable" section in there.

Can someone explain this?
Is it some Linux scripting magic I'm not aware of? (I'm a Linux newbie)
Or is it perhaps some obsolete, long-time-nonexisting switch, which just gets repeated over and over during the years?


Just type /etc/init.d/bwmon_gargoyle for all available commands. When you use stop, it will start again after restart, but disable will permanently stop it.

Sincerely
VAMET

excelsi
Posts: 29
Joined: Sat Sep 08, 2012 7:44 am

Re: Version 1.7.1 - Guest Network Support

Post by excelsi »

Hi,
For my first look and testing OpenVpn works now fine on TPLink-1043ND.
But after the first router restart the router isn't responsible again like in the firmware versions before. I had to go in failsafe mode again to launch "firstboot". :-(

For Reference:
viewtopic.php?f=6&t=6585

Thanks for your help.

Evzen
Posts: 16
Joined: Tue Mar 10, 2015 7:03 pm

Re: Version 1.7.1 - Guest Network Support

Post by Evzen »

VAMET wrote:Just type /etc/init.d/bwmon_gargoyle for all available commands. When you use stop, it will start again after restart, but disable will permanently stop it.


Okay, but where does the "disable" switch come from?
As already stated, there is no "disable" section inside the "bwmon_gargoyle" script...
I can see "start", "stop", "restart", "boot", "update_cron", etc... but not "disable".

Sorry if this is a stupid question, maybe I'm simply missing some Linux elementary knowledge... :oops:
UPC broadband 240/20 Mbit
TP-LINK TL-WDR4300 v1.7

User avatar
VAMET
Posts: 35
Joined: Thu Oct 23, 2014 7:25 pm
Location: Gdynia, Poland
Contact:

Re: Version 1.7.1 - Guest Network Support

Post by VAMET »

Dear Evzen

Gargoyle 1.7.1

root:~# /etc/init.d/bwmon_gargoyle
Syntax: /etc/init.d/bwmon_gargoyle [command]

Available commands:
start Start the service
stop Stop the service
restart Restart the service
reload Reload configuration files (or restart if that fails)
enable Enable service autostart
disable Disable service autostart


As you can see, there is disable command.

Sincerely
VAMET

ispyisail
Moderator
Posts: 4809
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Version 1.7.1 - Guest Network Support

Post by ispyisail »


Takeru
Posts: 2
Joined: Sun Apr 26, 2015 1:52 pm

Re: Version 1.7.1 - Guest Network Support

Post by Takeru »

Hi, does this have IPV6 support, or it's possible to install using opkg?

Anyway, thanks for your work. ;)

Evzen
Posts: 16
Joined: Tue Mar 10, 2015 7:03 pm

Re: Version 1.7.1 - Guest Network Support

Post by Evzen »

VAMET wrote:As you can see, there is disable command.

I'm talking about the content of the script itself.
While there is a clearly visible "start", "stop" and "restart" function (and some other internal ones), there isn't any "disable" function.
And THAT'S what I'm talking about.
UPC broadband 240/20 Mbit
TP-LINK TL-WDR4300 v1.7

Post Reply