Version 1.7.0 - Barrier Breaker

The latest news about Gargoyle

Moderator: Moderators

Andy
Posts: 21
Joined: Wed Oct 01, 2014 10:51 pm

Re: Version 1.7.0 - Barrier Breaker

Post by Andy »

djt_nz wrote:Before I start a custom build can someone confirm if the bb branch has been merged back into master. So I no longer need to do a "git checkout bb"
I don't use git much, more of a svn man, find git a bit confusing at times :cry:


I believe it has

Lantis
Moderator
Posts: 5537
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Version 1.7.0 - Barrier Breaker

Post by Lantis »

tryfarming wrote:installs and runs fine on wndr3800 except dlna does not scan for media.
media is on a usb attached drive, files can be shared across network so drive is recognised and able to be read. dlna server is running and can be seen on network but is empty. Any help appreciated.



Can confirm DLNA works fine on my device. Scan of my 1.4TB drive started before bed and was finished this morning.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

runsir
Posts: 1
Joined: Mon Jan 05, 2015 8:37 pm

Re: Version 1.7.0 - Barrier Breaker

Post by runsir »

the wifi on TP-Link TL-WDR4310 v1 is not stable with 5G and 2.4G
sometime, the ping to the router is very high

hellbound1988
Posts: 38
Joined: Thu Jan 13, 2011 11:39 pm

Re: Version 1.7.0 - Barrier Breaker

Post by hellbound1988 »

Asus RT N-16 is supported now with this release ?

nworbnhoj
Posts: 914
Joined: Mon Jul 21, 2014 10:08 am
Location: Australia
Contact:

Re: Version 1.7.0 - Barrier Breaker

Post by nworbnhoj »

nworbnhoj wrote:I loaded 1.7.0 onto a TP-Link TL-WR1043N/ND v2 successfully.

However, when configured as a Gateway, the Internet/WAN interface does not offer a 3G (GSM) option despite a Huawei E160E modem being plugged into the USB port. The modem has power and the status light indicates that a 3G signal is available.


logread ..............

kern.info
[156.130000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[156.300000] usb-storage 1-1:1.0: USB Mass Storage device detected
[156.310000] scsi0 : usb-storage 1-1:1.0
[156.310000] usb 1-1: USB disconnect, device number 2
[163.870000] usb 1-1: new high-speed USB device number 3 using ehci-platform
[164.030000] usb-storage 1-1:1.0: USB Mass Storage device detected
[164.040000] option 1-1:1.0: GSM modem (1-port) converter detected
[164.050000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
[164.060000] usb-storage 1-1:1.1: USB Mass Storage device detected
[164.060000] usb-storage 1-1:1.2: USB Mass Storage device detected
[164.070000] option 1-1:1.2: GSM modem (1-port) converter detected
[164.080000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
[164.080000] usb-storage 1-1:1.3: USB Mass Storage device detected
[164.090000] option 1-1:1.3: GSM modem (1-port) converter detected
[164.100000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
[164.110000] usb-storage 1-1:1.4: USB Mass Storage device detected
[164.110000] scsi5 : usb-storage 1-1:1.4
[164.120000] usb-storage 1-1:1.5: USB Mass Storage device detected
[164.130000] scsi6 : usb-storage 1-1:1.5
kern.notice
[165.120000] scsi 5:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[165.130000] scsi 6:0:0:0: Direct-Access HUAWEI MMC Storage 2.31 PQ: 0 ANSI: 2
[165.160000] sd 6:0:0:0: [sda] Attached SCSI removable disk

Continued at http://www.gargoyle-router.com/phpbb/viewtopic.php?f=11&t=6563
Last edited by nworbnhoj on Tue Jan 06, 2015 5:07 am, edited 1 time in total.
Can you help someone else get Gargoyle up and running?
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E

gendo
Posts: 14
Joined: Tue Jan 06, 2015 3:58 am

Re: Version 1.7.0 - Barrier Breaker

Post by gendo »

Think i found a bug with vpn. Vpn connects successfully from client and route is added. when i ping router which is 192.168.1.254 from vpn client, it is succesfull

Pinging 192.168.1.254 with 32 bytes of data:
Reply from 192.168.1.254: bytes=32 time=23ms TTL=64
Reply from 192.168.1.254: bytes=32 time=21ms TTL=64

however if i ping another host (with LAN Subnet Access: Allow clients to access hosts on lan) i get the following

Pinging 192.168.1.253 with 32 bytes of data:
Reply from 10.8.0.1: Destination port unreachable.
Reply from 10.8.0.1: Destination port unreachable.

If i change LAN Subnet Access: to clients cannot access lan i get

Pinging 192.168.1.253 with 32 bytes of data:
Request timed out.
Request timed out.


in essence i cannot access any hosts behind the vpn server, i can only access the vpn server (gargoyle)

ispyisail
Moderator
Posts: 4809
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Version 1.7.0 - Barrier Breaker

Post by ispyisail »

gendo wrote:Think i found a bug with vpn. Vpn connects successfully from client and route is added. when i ping router which is 192.168.1.254 from vpn client, it is succesfull

Pinging 192.168.1.254 with 32 bytes of data:
Reply from 192.168.1.254: bytes=32 time=23ms TTL=64
Reply from 192.168.1.254: bytes=32 time=21ms TTL=64

however if i ping another host (with LAN Subnet Access: Allow clients to access hosts on lan) i get the following

Pinging 192.168.1.253 with 32 bytes of data:
Reply from 10.8.0.1: Destination port unreachable.
Reply from 10.8.0.1: Destination port unreachable.

If i change LAN Subnet Access: to clients cannot access lan i get

Pinging 192.168.1.253 with 32 bytes of data:
Request timed out.
Request timed out.


in essence i cannot access any hosts behind the vpn server, i can only access the vpn server (gargoyle)


can you create another thread with screen shots of your config

thanks

ispyisail
Moderator
Posts: 4809
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Version 1.7.0 - Barrier Breaker

Post by ispyisail »

nworbnhoj wrote:
nworbnhoj wrote:I loaded 1.7.0 onto a TP-Link TL-WR1043N/ND v2 successfully.

However, when configured as a Gateway, the Internet/WAN interface does not offer a 3G (GSM) option despite a Huawei E160E modem being plugged into the USB port. The modem has power and the status light indicates that a 3G signal is available.


logread ..............

kern.info
[156.130000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[156.300000] usb-storage 1-1:1.0: USB Mass Storage device detected
[156.310000] scsi0 : usb-storage 1-1:1.0
[156.310000] usb 1-1: USB disconnect, device number 2
[163.870000] usb 1-1: new high-speed USB device number 3 using ehci-platform
[164.030000] usb-storage 1-1:1.0: USB Mass Storage device detected
[164.040000] option 1-1:1.0: GSM modem (1-port) converter detected
[164.050000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
[164.060000] usb-storage 1-1:1.1: USB Mass Storage device detected
[164.060000] usb-storage 1-1:1.2: USB Mass Storage device detected
[164.070000] option 1-1:1.2: GSM modem (1-port) converter detected
[164.080000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
[164.080000] usb-storage 1-1:1.3: USB Mass Storage device detected
[164.090000] option 1-1:1.3: GSM modem (1-port) converter detected
[164.100000] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
[164.110000] usb-storage 1-1:1.4: USB Mass Storage device detected
[164.110000] scsi5 : usb-storage 1-1:1.4
[164.120000] usb-storage 1-1:1.5: USB Mass Storage device detected
[164.130000] scsi6 : usb-storage 1-1:1.5
kern.notice
[165.120000] scsi 5:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[165.130000] scsi 6:0:0:0: Direct-Access HUAWEI MMC Storage 2.31 PQ: 0 ANSI: 2
[165.160000] sd 6:0:0:0: [sda] Attached SCSI removable disk


you might want t sart a new thread with a link

gendo
Posts: 14
Joined: Tue Jan 06, 2015 3:58 am

Re: Version 1.7.0 - Barrier Breaker

Post by gendo »

ispyisail wrote:
gendo wrote:Think i found a bug with vpn. Vpn connects successfully from client and route is added. when i ping router which is 192.168.1.254 from vpn client, it is succesfull

Pinging 192.168.1.254 with 32 bytes of data:
Reply from 192.168.1.254: bytes=32 time=23ms TTL=64
Reply from 192.168.1.254: bytes=32 time=21ms TTL=64

however if i ping another host (with LAN Subnet Access: Allow clients to access hosts on lan) i get the following

Pinging 192.168.1.253 with 32 bytes of data:
Reply from 10.8.0.1: Destination port unreachable.
Reply from 10.8.0.1: Destination port unreachable.

If i change LAN Subnet Access: to clients cannot access lan i get

Pinging 192.168.1.253 with 32 bytes of data:
Request timed out.
Request timed out.


in essence i cannot access any hosts behind the vpn server, i can only access the vpn server (gargoyle)


can you create another thread with screen shots of your config

thanks

done viewtopic.php?uid=6758&f=6&t=6562&start=0

ciceropc
Posts: 3
Joined: Tue Jan 06, 2015 4:47 am

Re: Version 1.7.0 - Barrier Breaker

Post by ciceropc »

I've installed on my TL-WR841N v9.1 and everything is working greatly. Some perspective for TL-WR842N v2?

Edit:

The quotas dont work here.

Post Reply