Version 1.5.3 & 1.4.6

The latest news about Gargoyle

Moderator: Moderators

Dude_Virus
Posts: 13
Joined: Thu Feb 23, 2012 2:38 am

Re: Version 1.5.3 & 1.4.6

Post by Dude_Virus »

It seems the router has gone bricked as nothing happenning on the router even after such a long time....its just not responding...i tried powering off and powering it back on but nogo....now i am not egen able to go to default router page....factory reset doesnt work...ne suggestions as to wht cab be tried.


Finally unbricked the router and recovered firmware and now back on 1.4.6

mjonsson
Posts: 2
Joined: Thu Feb 23, 2012 7:02 pm

Re: Version 1.5.3 & 1.4.6

Post by mjonsson »

I just put 1.5.3 on a new tp-link tl-wr1043nd and restored a backup from 1.3.9 (including >30 ip <-> name and wan mac addr etc.) and the dhcp menu link was missing too, but accessible through dhcp.sh url.

But when I switched from gateway to bridge and back again and then clicked 'Save Changes' the dhcp link came back to the menu :)

I was very pleased that even the web usage log was restored!

mix
Posts: 292
Joined: Sun Feb 27, 2011 11:18 am

Re: Version 1.5.3 & 1.4.6

Post by mix »

mjonsson wrote:I just put 1.5.3 on a new tp-link tl-wr1043nd and restored a backup from 1.3.9!


Doesn't it say in numerous posts on this website that restoring from an old version like 1.3.9 isn't supported? Even though you think you have everything working, chances are something isn't configured right. Plenty of people have reported this.
WRT54GL v1.1
Gargoyle 1.4.7

Dude_Virus
Posts: 13
Joined: Thu Feb 23, 2012 2:38 am

Re: Version 1.5.3 & 1.4.6

Post by Dude_Virus »

I am unable to install 1.5.3 over the 1.4.6 as twice it ended up making my router non responsive and I had to try the on/off factory reset and then recovering my firmware using the netgear disc. For some reason the sysupgrade.bin always currupts the router. Can i try the normal image on top of the 1.4.6

mjonsson
Posts: 2
Joined: Thu Feb 23, 2012 7:02 pm

Re: Version 1.5.3 & 1.4.6

Post by mjonsson »

mix wrote:Doesn't it say in numerous posts on this website that restoring from an old version like 1.3.9 isn't supported? Even though you think you have everything working, chances are something isn't configured right. Plenty of people have reported this.


I just wanted to do a quick test and was not too worried that it wasn't supported. I just thought it might help someone else.

braders
Posts: 5
Joined: Fri Feb 24, 2012 5:26 pm

Re: Version 1.5.3 & 1.4.6

Post by braders »

Is it possible to clone wan (wifi - wisp mode) mac address using garygole on tl-wr1043nd?

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: Version 1.5.3 & 1.4.6

Post by DoesItMatter »

braders wrote:Is it possible to clone wan (wifi - wisp mode) mac address using garygole on tl-wr1043nd?


https://forum.openwrt.org/viewtopic.php?id=14360

ALOT is possible via the command line via putty

Currently not supported in the Gargoyle GUI

Maybe a future feature?
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: Version 1.5.3 & 1.4.6

Post by DoesItMatter »

Dude_Virus wrote:I am unable to install 1.5.3 over the 1.4.6 as twice it ended up making my router non responsive and I had to try the on/off factory reset and then recovering my firmware using the netgear disc. For some reason the sysupgrade.bin always currupts the router. Can i try the normal image on top of the 1.4.6


Try this

1) Re-flash 1.4.6 over itself so that it wipes everything and does
a full reset to defaults of everything on the router.
2) DO NOT reload an old config - leave everything as default.
3) Close all browsers, re-open a new one, goto the Gargoyle GUI
and immediately do the upgrade to 1.5.3
4) Report back with what happens (hopefully a success)
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

cn008
Posts: 23
Joined: Tue Jan 24, 2012 3:54 pm

Re: Version 1.5.3 & 1.4.6

Post by cn008 »

Just upgraded from 1.4.5 to 1.4.6 on WR841.

Upgrade was smooth. But somehow I lost internet connection after upgrade, though the status shows "connected" and there is a valid WAN IP, but I cannot connect.

I had to power off my modem and router to connect to internet.

Also the bandwidth usage data seem to be lost, though the quota usage is still there.

kwolf
Posts: 9
Joined: Sun Feb 26, 2012 12:33 am

Re: Version 1.5.3 & 1.4.6

Post by kwolf »

1.5.3 - first build to work flawlessly for me :) I've been trying out Gargoyle every few months.

Works awesome on my TP-Link TL-1043ND v1.7 I love it!

Post Reply